What cage is the best for rabbing rabbits

1. Single -layer rabric

rabbit cages are arranged at the same level.This rabbit cage breeding density is low, and the utilization rate of the house is low.But the ventilation is good, easy to manage, and good environmental sanitation.Suitable for breeding and breeding female rabbits.

2. Double -layer rabbit cage

Use a fixed bracket to assemble the two horizontal planes up and down of the rabbit cage.The breeding density is increased compared to a single -layer rabbit cage, which is convenient for management.

3. Multi -layer rabbit cage

The three or more layers of cages are arranged and arranged. The breeding density is large, the ventilation is not good, and the indoor hygiene is difficult to maintain.

4. Overlap rabbit cage

The upper and lower cages are completely overlapped, with inheritance plates between the layers, generally 2-3 layers.The rabbit house has a high utilization rate, and the unit area of the unit is high.However, the number of overlapping layers should not be too much, it is advisable to be 2-3.The ventilation and light in the house are poor, and the temperature and light of the upper and lower layers of the rabbit cage are uneven.

5. All -step rabbit cage

When the rabbit cage is arranged, the upper and lower cages are completely staggered, and the feces fall directly into the dung ditch under the cage, and there is no dung plate.The feeding density is high, the ventilation is well transmitted, and the observation is convenient.Because the layer is completely staggered, the vertical distance between the layers is large, and the management of the upper cage is inconvenient.At the same time, it is more difficult to clean up manure.Therefore, the full -step rabbit cage is most suitable for second -layer arrangement and mechanized operation.

6. Half -step rabbit cage

Part of the upper and lower rabbit cages overlap, and the inheritance plate is provided at the overlap.Because the vertical distance of the rabbit cage is shortened, the upper cage is easy to observe and manage.Compared with the full -step rabbit cage breeding density, the utilization rate of rabbit houses is high.It is a form in the middle of a full -step and overlapping rabbit cage, which can be manually operated and suitable for mechanized management.Therefore, it has certain practical value in my country.

How much is a rabbit cage

It depends on how big the rabbit cage, a few dollars, and more than a hundred or more.

What are the rabbit nests?

1. The cushion at the bottom of the cage

A clean cloth can be placed at the bottom (although someone is paved with a newspaper at the bottom, it is still recommended to use white newspapers or advertising paper without ink to avoid the toxicity of the rabbit because of the ink because of the bite of the newspaper.)(Ren), facilitate the owner to clean up the poop of the rabbit.

2, tableware

If you decide to eat feed for rabbits, you must prepare a bowl of food, and choose a little weight and heavy weight to prevent the rabbit from accidentally stepped on the edge and turn it over the bowl.The material is also as hard as possible to prevent rabbits from bite the food bowl and destroy it.

3. Drinking water heater

Some people say that rabbits cannot drink water, which is a bit unrealistic.It is important to prepare sufficient clean diet.General pet stores should buy such items.The reason why you choose a water heater instead of putting it directly because if the rabbit is active in the cage, you will definitely accidentally burn the water bowl. At that time, it will inevitably sprinkle the water on the rabbit., Also increase the chance of Skin diseases.

4. mask tools

The grinding Tool generally does not need to be placed in the cage at all times, and then let it bite when it is used.

rabbit cage installation

1. installation of a drinking heater:The automatic drinking water heater is installed on the back panel, and the water pipe is parallel outside the board (rabbits are grabbed, and the water pipes cannot be bitten).If a self -made drinking heater, it should be hung at the front door to facilitate the water level and timely replenishment.

2. installation of the ingredients:The ingredient box is best to make a plug -in.It can make the rabbit from getting out of the steel door when eating, and it is easy to add materials.You can also put the ingredients in the door, but keep a certain height to prevent rabbits from rabbits.

How to do the rabbit cage

Prepare the materials before making a rabbit nest. You can use bricks to give a nest near the corner to the rabbit. The rabbit's nest must be kept clean.Prepare four cement bricks, choose the side of the wall, set up a 40*50 ground nest, spread the side of the ground nest with the wood chips in the ground nest, leave the empty side of the cement brick to drill the rabbit into the drillOut, find a 60*60 floor brick on the ground nest, so that the ground nest can not blow everywhere.

rabbit cage cleaning and cleaning

1. Daily rabbit cage clean

(1) Take any unsatisted fresh food (fruits, vegetables, etc.) from the cage every day.Ideally, this is even twice a day, once in the morning, once in the evening.

(2) Rinse the food bowl.

(3) clean and re -filled the water bottle.The bottle brush will make this task easier.

2. rabbit cage clean every week

(1) Perform daily cleaning tasks.

(2) Take out all accessories and toys from the cage.Wash and clean it with water and detergent.

(3) Take it out of the cage and wash all the clothing beds.Replace the clean bedding.Each rabbit cage should have two sets of bedding/blankets to facilitate themselves.

(4) Wipe the cage with hot water and use vinegar to help remove stubborn urine deposits.If you have a smaller cage, you may need to remove it and rinse it with water in the bathtub or the outer hose outside.

What to do if the rabbit does not enter the nest

The bigger reason for the rabbit does not go to the nest to sleep because the rabbit does not think that the nest you bought for it is used to sleep, just like buying a new toilet and need to train it to learn to go to the toilet. The owner also needs to patiently guide the rabbit.The nest is used to sleep.We can try the following methods:

1. Use snacks to make bait

Put the snacks that the rabbit likes to eat in the nest, seduce the rabbit to eat inside, and do not give it snacks outside the nest. Over time, it will know that there can be snacks in it.

2. Massage assistance

After the rabbit drilled in, he touched his head and killed it. He felt comfortable with the rabbit. Every day, the rabbit knew that this could be lying on, and it was used for rest.

[Method for polarizing mirror] How is the main purpose of polarizing mirror in polarizing mirror?

How to use Polarized mirror

There are two types of polarizing mirrors: round polarizer (Referred to CPL ) Line polarial mirror (simply referred to PL or LPL To.

They are in most consumer digital cameras (DC ) There will be no difference in upper. TTL Light metering function) SLR/DSLR Also DC And hope to share a polarizing mirror, it is best to choose a round mirror.In addition, the differences between line polarizers and round polarized mirrors, as well as why in modern times SLR/DSLR The reason to use a round Polarized mirror, in the clumsy book L.6 Zhang has a very careful explanation; but because it is not important for novices, it is omitted here. Interested friends, please refer to the clumsy book (there is a chapter in the link above PDF files).

There is a loop that can rotate freely on the Polarized mirror. Its function is to regulate the effect of polarizing mirror.The polarizer is usually two types: thick (general) type and thin type. The former may be thicker than the latter1mm Or more, when mentioning polarizers below, if there is no special explanation, it refers to thick (or general) polarizer.The thin Polarized mirror is for wide -angle or ultra -wide -angle lens, because too thick polarizing mirrors can easily produce dark corners.Generally speaking, if the camera lens ( 135 Movies) The equivalent focal length is at 35mm Above (including 35mm ), Thick polarizer should not have a dark corner; but if the focal length is less than 35mm The thick Polarized mirror is likely to produce dark angles, but this is usually related to the optical and mechanical structure of the camera mirror. It may not be the case for every lens, so it is best to try it before buying a polarizer.

The main purpose of polarizing mirror:

Reduce the reflection of glass, water surface, and non -metal surface, make the sky blue, and improve the saturation of the color of the picture.Because the Polarized mirror is dark gray, it will block part of the part that can reach the sensor chip Light, it will generally decrease1 arrive 1.5 Between Levels.In addition to the full manual exposure mode, the camera's optical metering system of the camera will be adjusted by itself in other (such as aperture prerequisites, or the shutter prerequisite) mode, but you still have to check whether the aperture or shutter speed selected by the camera will be used.

Reduce reflection

The reflection on the surface of the subject will wash away the details of the picture, or change the color of the picture. One of the most important functions of the polarizing mirror is to reduce or even eliminate the light that is reflected by the camera and enter the lens, but when the subject is metal, Polarizer The function is not very significant.The best angle of lowering or eliminating the reflection with a polarizer is that when the light source's irradiation angle and the camera shooting angle are made with the camera30 On the occasion, one (or two) deviates from 30 The time -effective use will be reduced, and the more effective the angle deviation is, the lower it will be.It is very simple to reduce the reflection with polarizers.After the composition is completed, rotate the ring in front of the Polarized mirror, and watch the scene window (or LCD/EVF ) The effect of polarizing mirror will be displayed. Once the desired effect is obtained, stop rotating and shooting.It should be noted that polarizing mirrors are not universal, and it is likely to be unable to completely eliminate reflection.

The most well -known application of polarizing mirrors is to deepen the blue of the sky, making the blue sky and white clouds stronger; however, if the sky is not blue (such as a cloudy day), no matter how good the polarizer is, the blue sky cannot be shot.But we should It is time to understand that only one of the sky will become bluer, and the other may not change. More importantly, the shooting angle must be selected correctly.There is a very simple rule for choosing shooting angle, first extending the index finger To the sun, then erected the big fingers vertically with the index finger, and turning around the index finger, so the direction that the Mark finger passes is to get the most effective shooting direction; in other words, the best shooting direction and the direction from the camera to the sun to the sun Droop straight!Please pay attention, the Mi fingers passed by360 Degree, except for the middle of the right, this time, this 360 Some parts in the sky, part of the ground to the ground, to the sky is the direction that can turn the blue and become blue.When the camera deviates from this direction (such as the shift in the sun or the anti -sun direction), the lower the effect. If it is more than a certain angle, the effect will not be significantly or even disappear.After looking for the direction of shooting, slowly turn the ring in front of the polarizer, and take the shutter after getting the expected effect.

In addition, because polarizing mirrors will reduce or even eliminate the reflection of the subject, the color of the picture shot with polarizer is also more pure than it is not in time, and the contrast is also higher. This is the theme of the next section.

increase the saturation of contrast and color

The reflection of the subject will cover up the original color and details. If the reflex characteristics of the subject in the screen are similar (such as the leaves), a faint reflection not only erase the original color, but also reduce the contrast of the picture. In this Affection In the case, the use of polarizers has the effect of reducing reflection, reproducing the color of the subject, and improving the comparison of the picture.The lower left photo is added with a polarizer but the lowest effect is used, and the lower right is the maximum effect; these two are extremely strong In contrast, the reflection of the leaves under the scorching sun distused the color of the woods, but to maximize the effect of polarizing mirror, and the color of the wood and the grass appeared, making the two photos very different.

If the camera cannot be equipped with polarizing mirror?

Many small and stylish digital cameras can neither install filters nor adding sleeves, but we can hold a polarizer in front of the camera to shoot, but how to adjust the effect of polarizing mirror?The method is very simple. First of all The direction of the mirror on the shooting of the lens (so the closer to the camera, the better), see the lower left photo; then turn the ring on the Polarized mirror, stop after the expected effect (below); finally move the adjusted polarizer to the lens to the lens Ahead (below Right), but the polarization mirror cannot be rotated, because once the direction of the polarization mirror is changed, the desired result is not available.

Practice this procedure several times, and try to take some photos to compare the results of use without polarizing mirrors. After several times, they will be handy.Most lightweight digital cameras have a small diameter, small,37mm The Polarized mirror is usually large enough (if it is suspected 37mm Too small, just use it 43mm ; 37mm Too big, try to try it 28mm ), Bring a polarizer with you, you can easily take photos with saturated color, blue sky and white clouds, and high contrast during travel.

precautions for using polarizers

First, polarizing mirror may be the most important filter in digital photography. It can reduce or even eliminate the light reflected by the subject, turn the sky blue, improve the saturation of the comparison of the picture and color.

Second, most consumer digital cameras can use line polarizers, but the vast majority (especially those with autofocus and metering function)SLR/DSLR You can usually only use a round Polarized mirror.If a Polarized mirror is used at the wide angle end, a thin Polarized mirror should be used.

Third, the use of polarizers will lose1 arrive 1.5 Grade light will affect the aperture or shutter speed of the selected; in other words, it is likely to use a large aperture (so the depth of the depth of the scene) or the slower shutter speed (then the movement of the movement It may be blurred and easily shake the camera), so you should pay attention to the aperture and the shutter speed.

Fourth, although the polarizing mirror has the effect of reducing reflection and turning the sky blue, but this effect is related to the angle of shooting. If the shooting angle is wrong, it is likely that the expected effect will not be obtained.Furthermore, when shooting with a wide -angle or ultra -wide -angle lens, because the viewing angle may be greater than the best angle of the polarizer, the sky in the screen may appear from very deep to quite light, that is, the blue color with uneven concentration.

Fifth, it is best to remove it from the lens when there is no need to use a Polarized mirror.1 arrive 1.5 In the secondary light, the second is because the effect of the polarization mirror is set to and the effect is more or less, so the polarizer may sometimes cause the anti -effect (such as filtering the expected reflection).

This article introduces the basic concepts, usage, and effects of polarizing mirrors, and lists some precautions when using polarizers.The effect of polarizing mirrors is difficult to simulate post -made software, even if the sky turns blue.if The boundary between the sky and the ground is relatively simple. When the post -made system is selected, it is easier to change the color depth. Once the boundary becomes very complicated, the part of the sky is a time -consuming and laborious job. Objects, it is better to use Polarized mirror to adjust the effect when shooting.Furthermore, if the picture loses the details due to reflection, no matter how good the post -made skills are, there is no way to make the details and color that has not been recorded. Come.For these reasons, polarizing mirrors are a filter that cannot be completely replaced by post -made software.

1. 8 categories of Outdoor leisure chairs

1. Arras

The collective name of the back chair with a handrail is called armchair except the circle chairs and chairs.Its style and decoration are simple and complicated. They often cooperate with the coffee table with the settings, and use four chairs and two to place them on both sides of the hall.

2. Massage chair

The principle of a massage chair is to imitate artificial massage, but it uses mechanical rolling power and mechanical power to squeeze for massage.The massage chair can use a variety of massage methods such as swinging, pressing, pinching, and rubbing along the spine according to the human curve.

3.

The lounge chair is one of the furniture with new styles and functional purposes that appeared in the Qing Dynasty. The end -stage craftsmanship and skills of Chinese feudal society have continued to improve. People pay more and more attention to the quality of life.New varieties like lounge chairs.There are many other nicknames in lounge chairs. "Before bed chair", "warm chair", "Xiaoyao chair", "spring chair", etc., are different titles for a certain type of lounge chair.The materials used in modern lounge can be: mahogany, bamboo, vine, aluminum alloy, etc.

4, shake chair

The rocking chair is a chair that can shake back and forth. The main material is rattan or wood or metal.The rocking chair is a special form of chair, which enhances the quality of life and increases the taste of life. It is one of the types of chairs that the elderly like.

5. Vine chair

Various chairs are made of bamboo, and vines are wrapped in various chairs.There are varieties such as vine chairs, vine chairs, and rattan chairs.The rattan chair is both breathable and elastic. It is best to choose a chair with back, and put a stool on the foot to make your legs flat and prevent the lower limbs from ischemia.

6. Transit chair

The upper part is not much different from the style of the general chair. However, there is a rotation part of the title "independent leg" under the seat. Therefore, the human body can rotate left and right at will.The age of the transfer chair is not too early. It is a chair that Chinese furniture absorbs foreign style earlier.

7. folding chair

folding chair has always been considered one of the most important furniture and a symbol of social status.In ancient civilization, the folding chair is not only for the seats for people, but also used in various formal occasions and rituals.The development of the folding chair began from about 2000 to 1500 BC. The initial folding chair was a special seat for the military commander on the battlefield, and it was also a symbol of power and prestige.Although the time is constantly pushing, the folding chair has always been symbolic.

8. Qiuqian chair

Qiuqian chairs are hand -woven with bamboo and vines. They use Hanging chairs, unique shapes, and bold ideas, so that those who see Qiuqian chairs want to sit up and try.Because hand -woven, the price is expensive, about 500 yuan to 600 yuan.

2. Dimensions of Outdoor leisure chairs at different occasions

1. The size of the casual chair in public places

casual chair in the community: 1.2-1.6*0.5*0.45 meters

Park casual chair: 1.6*0.8*0.7 meters

2. The size of the home Outdoor Leisure chair

Depending on the environmental environment, the size of the Outdoor Leisure chair of the furniture is different. The biggest is the courtyard Leisure chair, followed by open -air casual chairs, and balcony casual chairs. Outdoor Furniture should be coordinated with space size.

Size: 0.645*0.68*1.15 meters

Size: 0.66*0.57*0.97 meters

The above introduces the types and sizes of Outdoor leisure chairs in detail. You can choose the type of Outdoor Leisure chair that suits you according to different applications and living habits, while the size of the casual chair should be reasonably selected according to the size of the space to avoid excessive or too much too much or too much.Small.I hope the above can help friends who need to choose Outdoor leisure chairs.

1. What is the price of Fishing rods?

The price of Fishing rods ranges from dozens to thousands of yuan. The quality and raw materials of the Fishing rods at different prices are different. The following specifically introduces several fish rods of different prices:

At 100-300 yuan fishing rod, the carbon content is greatly improved.Most of the merchants sold are some small brands.The fishing rod is relatively strong, but the production is rough.

The 300-500 fishing rod is basically high-carbon cloth, and it is also a fishing rod often used by many fishermen. It is more suitable for novices.

500-1000 Fishing rods, the starting price of some big brands of Fishing rods is about at this price, and many of the carbon cloths used are imported.These Fishing rods are relatively stiff and feel good.

The fishing rod of more than 1,000 yuan is better. Most of them are long poles of fishing.If it is a short pole, I think it is very expensive, and the cost performance is not high.

The price mentioned above refers to a short pole of 4.5 meters, and the price of different sizes is different.For example, a fishing rod, 4.5 meters at 500 yuan, 7.2 meters long rods are seven or eight hundred yuan.

2. How to choose a fishing rod

1. Look at the price of Fishing rods

The expensive fishing rod has invested more in terms of cost and workmanship, and the natural price will be very expensive, and those who are cheap will not invest so much, and the cost reduction will become lower.It is recommended that novices start with cheap ones, because they have no fishing experience, and they can easily damage the fishing rod. Even if some aspects are not enough, they can catch fish.

2. Look at the size of the fishing rod

Many new fishermen, when they learn fishing in the early days, they start with a long -range fishing rod. They are called a tiger and prestige by the river. As a result, they did nt throw them out a few times, or they were tired and threw the house to eat ash!This is the blind manner of first learning fishing. The longer the fishing rod size is always, the more fish, the greater the fish. As a result, the operating strength of its own operation.Generally, the novice period does not need to be too long. There are not so many big fish in the river. If there are small rivers around, the fishing rod is enough to start between 3.6 and 5.4 meters, mainly to choose a short rod.

3. Look at the material of the fishing rod

Most of the Fishing rods are carbon fiber and glass fiber material. The carbon fiber has high strength. The Fishing rods are relatively light, but it also has disadvantages, which is very crispy.The weight of glass fiber Fishing rods will be slightly heavier, but it is very durable and practical.It is best not to choose a high -carbon pole in the novice period.It is recommended that glass fiber or carbon wrap rods. The price is not high. Although the weight of the same size will be heavier than pure carbon, it is not a problem for leisure wild fishing to fish for several years.

4. Look at the hardware of the fishing rod

The hard and hard choice of Fishing rods mainly depends on the fishing environment. Do you go to black pits or go fishing or leisure and wild fishing. These two are related to the choice of hard and hard and hard and hard fishing for Fishing rods.

5. Look at the brand of Fishing rods

The fishing rod brand should try to choose those old brands with high popularity. The product foundation of the old brand cannot be done by many new brands. Their low -end products may be better than the high -end product of the new brand.New difference.

1. What are the common faults of mountaineering sticks

1. Stuck and lock: The most common reason is because the operation is wrong, such as the lock is too tight or too loose during use.

2. cycling rods: It is usually caused by errors for the force point, which is usually the one that changes the badly.

3. Polar tip wear: After using it for too long, it becomes Smooth and the anti -slip effect will become worse. At this time, it is recommended to change the tip of the stick.

4. Metal oxidation: When you go home, you do nt wipe or dry immediately, it will easily lead to oxidation. At this time, the Climbing stick will be stuck.

2. How to repair the Climbing stick

1. What should I do if the Climbing stick is rust and oxidize

When maintaining a Mountaineering stick, you can use a very small amount of rust removal to treat the rust on the surface, but before use, you must remove all the oil on the surface so that it will not affect the adjustment of the Mountaineering stick.In addition, you can also use very fine scrub paper to remove rust on the surface, and keep the lock function of the climbing rod is not affected.[Although this may wear out the indication scale above the Climbing stick] Using the rotating lock -locked Mountaineering stick may fall due to the rust rust of powder, blocking the locking rings to affect the locking effect, so when maintenanceIt is necessary to remove the rust of the rings, especially before using them to use them, be sure that the inside is very clean and does not contain any rust and oil.

2. The Climbing stick is not tight and stuck

There are two common locking methods for climbing rods:

outer buckle: The fast -bucking rod is not tight because the snail is loose. When it is loose, the spacing of its clip will become larger and it will not be able to hold its next section.

[Solution] Take a Swiss knife or screw up, and lock it a little bit when you hold it, and the snail teeth will become tight.

There are two kinds of materials for common climbing sticks: plastic fast buckle, aluminum alloy fast buckle.The plastic fast buckle is slightly locked with the screws, and then test whether the looseness is appropriate.The fast buckle of aluminum alloy is sometimes difficult to lock. At this time, you can lubricate oil on the turning point.

Internal lock type: The suspended Mountaineering stick is not tight or stuck, it may be that the expansion clip in the middle is stuck, or the expansion clip runs too much.The length is often adjusted, and the Mountaineering stick is transferred too many times).

[Solution] First remove the expansion, and then reinstall it. The most important thing is that the teeth must be aligned, and then put it back.The expansion clip runs too much or is not aligned, at this time, you can pull it down and install it again.The expansion clip is not aligned, just pull it out and adjust it, then put it back.

3. How to avoid the Climbing stick on the way to climbing

It is recommended to check the locking part before departure and whether the Climbing stick structure is normal.However, if you are unfortunately broken on the way, it is recommended to keep the climbing rod completely preserved for manufacturers to repair and replace complete parts.Generally, we still recommend buying a good Mountaineering stick to avoid the climbing rods during the climbing on the way to the mountain.