1. Does the fishing fish line conductive

I often hear that someone is caught by the fishing. It is said that the fish wire encountered the wires and caused an electric shock. Some fishermen were severely burned or even died because of the high -voltage electric shock. Is the fish wire conductive?

It is understood that the fish wire guide does not conduct electricity, mainly depends on the material. Among them, nylon lines and PE wire generally do not conduct electricity, but if it is wet or soaked by the rain, it will conduct electricity; and the carbon line itself will have a strong strong ones itself.Conductability, you must pay attention to the surrounding environment and weather when you are fishing. You must not fish under the wires, and thunderstorms cannot be fished outdoors.

2. What's wrong with the fish wire without encountering a wire?

After the fish wire enters the water, no matter what the material is, it will conduct electricity. If you accidentally touch the wires, there will be the risk of electric shock. Sometimes, even if the fish wire does not touch the wire, it will shock. What is going on?

Generally, this situation mainly occurs near the high -voltage wire. The material of the high -voltage wire is aluminum. After oxidation in the natural environment, it will turn black. Because the wires above 35kV are exposed and charged.Line, not to mention insulation, as long as the distance between the fishing line and the wire with the power is less than the discharge distance, the high -voltage line will discharge it, which will cause electric shock.

Therefore, for their own safety, fishermen must not fish under high -pressure lines.

Third, fishing for electric shock emergency methods

When fishing, if the fish wire is touched by mistake, the fishermen shocked electric shock, they should be rescued in time, and the first aid adheres to the principle of "fast, on -site, accurate, and persistence".

1. Let the electric shock leave the power as soon as possible

First of all, the electric shock person should quickly get rid of the power, the faster the better.Because the longer the current, the heavier the damage.In the power supply, the ambulance personnel must not only save people, and pay attention to protect themselves. Do not directly contact themselves. Use insulating objects such as dry wooden sticks to rescue them to prevent their own electric shock.

2. Determine the consciousness of the electric shock as soon as possible

If the electric shock person is conscious, he should lie flat on the spot and ensure that the airway is Smooth, and use 5S time to call the wounded or lightly pat his shoulder to determine whether the wounded is lost consciously.It is forbidden to shake the wounded head, do not let it stand or walk for the time being.

3. Carry out cardiopulmonary resuscitation as soon as possible

Electric shocked first aid must fight in seconds, and immediately rescue the cardiopulmonary recovery method, and persisted in continuously, and at the same time dial 120 as soon as possible.

one,Why should the fishing rod wrap the sweat -absorbing Belt

The fishing rod can grasp the fishing rod more stably on the fishing rod, and it is entangledSweatEven if you are sweating, you can not slide the pole. The fishing rod handle is comfortable, and the fishing rod itself is a lot more beautiful.in addition,WillSweating beltIt has a certain protective effect on the handpan, especially for competitive fishermen.

2. How to wrap the fishing rod in sweat absorption belt

Method 1:

1. First prepare the Tool, a scissors, and a roll with a roll, you need to wrap the fishing rod.

2. There will be black tapes corresponding to the brand in the tangled Belt. Do not throw this. It will be used when it is closed.

3. Use scissors to cut a corresponding diagonal angle on the entangled band to fit the round shape of the fishing rod grip. This angle can be determined based on the round diameter at the end of the Fish rod grip. You can test it yourself.

4. Follow the edge of the grip at the end of the grip with a diagonal angle, and then wrap it evenly. At this time, you can use a little force to prevent it from dispersing in the future.

5. Then there is a gentle winding up. Pay attention to the distance between each circle of entanglement bands. This will be a beautiful point of view.

6. Then it is the end. In fact, the end is the same as the beginning. It is to cut a diagonal angle on the entangled band to fit the round shape of the fishing rod.You can first find a pen to make a mark on the entangled band to facilitate cutting more accurately.

7. Finally, you have to use the black tape that starts to roll the wrapped band.Just roll with a black tape and roll the wrap band.

Method two:

1. Press the thin end (start) of the sweat -absorbent Belt on the side of the bottom cover of the handle.Generally, double -sided adhesive stickers are attached to the beginning of the sweat absorption belt.Fix the sweat absorption belt. If you shoot your left hand, the direction is the opposite.

2. Hold the handle with your left finger to rotate it clockwise. At the same time, the right hand controls the direction of the sweat absorption belt, so that the sweat absorption belt is aligned.SweatThe edges of the band can overlap each other, heavyholdThe overlap depends on personal preferences, usually 2 mm.

3. The sweat absorption belt is wrapped to the bottom according to the above method. At this time, cut off the excess sweat absorption belt. If necessary, you can trim the sweat -absorbing Belt upper edge.

4. Prepare the Belt tape and wrap the end of the sweat absorption belt with tape until it will not spread.

precautions for flowering flowers in spring

1. spring flowers are not rushed out of the room

In the early spring, the temperature is extremely unstable. Generally, the pots of Potted flowers should be around the Qingming. Some Potted flowers must be around the rain, such as Bai Orchid, Jasmine, Milan, etc. Some also have to be before the rain, such as cacti, fairy balls, fairy, fairy peopleMountains, Lingjian lotus, etc.Under normal circumstances, the temperature changes very much when the temperature to the valley rain, and the temperature difference will not be too low or too high. It is relatively stable. At this time, it is more appropriate to go out."Refining seedlings", you can choose to open the doors and windows for a sunny day to ventilate it. The time is from short to long. If you encounter sunny weather, you can also move out of the sun.The outside environment.

2. Don't rush to open the window to ventilate

In the early spring pot, the flowers were just awake. There was not much resistance, and the lack of ability to resist the bad climate of the outside world.Some people think that spring is here, and it feels warm, so open the doors and windows to let them ventilate and ventilate, and completely forget the destruction of the dry cold wind in spring.The new buds that have just begun to germinate, when encountering the attack of thousands of cold winds, the new buds and young leaves will be frozen, and in severe cases, even the plants will be frozen to death.Therefore, in the spring, the cold wind should prevent the invasion of the pot flowers in rush to open the windows.

3. Pot flowers move outdoors in time

spring is sunny, and some people are anxious to move the pot flowers out of the sun. Due to the direct light of noon, the temperature around the pot flower can often reach about 20 C.As a result, the pot flowers cannot be adapted for a while, and even suffer from "heavy colds".

4. Do not expose the pot at night

In spring, although the temperature is gradually rising and the weather is warmer, the temperature is still so cold at night to early morning, and even frost (more frost) will appear, and there will be invisible dark frost.If the cold -resistant pots are attacked by dark frost, the flowers and leaves will be burnt, and it is difficult to recover.Therefore, at the early night of the flowers from the flowers, it was safer to recover the interior in the room at night.Therefore, when there is no dark cream, you can put it outdoors and let the pot flowers be exposed at night. Otherwise, it must be covered at night to prevent frost to ensure that the pot flowers can be safe and non -damaged.

5. Don't fertilize prematurely

There are five taboos for fertilization of pot flowers: avoid raw Fertilizer, thick Fertilizer, heavy Fertilizer, hot Fertilizer, sitting Fertilizer, early Fertilizer.However, some people do not know this, and they are eager to raise flowers. When they leave the room in spring, they are anxious to fertilize, and the Fertilizer applied is some raw, thick Fertilizer, and heavy Fertilizer of raw and fermented.Shinye can bear it? It can only be seen that these pots of flowers are "burned to death" by these pots of flowers, Fertilizer, and heavy Fertilizer.The fat and diligent application gradually increased, so that the plant flowers growing the branches and leaves are full. After the plants are strong, with a certain amount of Fertilizer resistance and fertilization, it is the correct and scientific method for fertilizing spring flowers.

6. Do not pour water for pot flowers

The weather in spring is just warming, the root of the pot flowers is emerging, and the new leaves are growing, and the old root absorption has weak water. If too much watering, it is easy to make the wet plant rot in the pot soil.Besides, the evaporation power of pot flowers is not strong at this time, so the principle of "see dry and wet. When poured, do not dry," the principle is the principle of dialectical scientific watering.

precautions for flowering flowers in summer

1. Avoid the sunlight

The summer sun is strong, and all Potted flowers should pay attention to prevent exposure.You can move the flowers to the window sill or balcony, hang a thin curtain on the window, and then let the sunlight, so that the flowers can enjoy the sufficient sunlight and not be broken.

2. Moderate flowers

At noon in midsummer, the temperature is very high, and the temperature of the flower leaves is often as high as about 30 C. The root system needs to continuously absorb water to supplement the loss of the leaves of the leaf surface.If cold water is poured at this time, although water is added to the pot soil, due to the sudden decrease in the soil temperature, the root hair is stimulated by low temperature, which will immediately hinder the normal absorption of the moisture and cause the plant to wither.

The best time for watering is at night, and the best watering after the heat is scattered.Various flowers habits are different and the requirements for watering are different. The specifics must be dependent on the maintenance conditions of everyone.Pay attention to succulent watering, don't be too much, don't pour on the leaves.

3. Should be properly controlled by water and Fertilizer

summer flowers grow fast, and they must provide sufficient Fertilizer in time.For ordinary Potted flowers and trees, it can apply thin liquid Fertilizer once a week; for flowers with acidic soil, alum Fertilizer can be applied every two weeks.Pay attention to watering the next day after fertilization.

4. Plants should be placed in a ventilation place

The room with the air conditioner is low, and the air humidity is relatively low, which can easily lead to the phenomenon of the blades of the leaves and plants.Putting flowers in the air -conditioned room should stay away from the outlet; indoor flowers, when the temperature exceeds 30 ~ C, pay attention to ventilation, open the window, and let the fresh air flow into the room and cool down the heatstroke.

5. Pruning the leaves in time

After many flowers enter the summer, they grow very quickly.In order to keep the plant -shaped shape and fruitful flowers, pruning plastic surgery is needed.The four seasons of begonia, golden bells, a bunch of red, chrysanthemums, etc. When they grow to a certain height, they can push their top, which can promote more branches and bloom.Many flowers often produce small buds from stems or branches, and should be removed in time to avoid consumption of plant nutrients.

Some leaves and flowers should be cut off properly to promote new leaves.Chrysanthemums, rose, etc. should be removed in time.Kim orange, pomegranate, and bergamot, when the young fruit grows to soybean grains, it must be removed from the size of the soybean grains. For some flowers that cannot be knotted or prepared to collect seeds, the residual flowers are cut off in time after the flowers.

6. Pay attention to prevent diseases and insect pests

In summer, insect pests such as aphids and red spiders are generally prone to occur.Once found, water can be washed multiple times, or sprayed leaves with medicinal solution can be used.Small hair can be brushed with a small hair.White powder can be washed with soapy water, and paid attention to ventilation to increase light.

precautions for flowering flowers in autumn

1. The light should be sufficient

Some of the flowers blossoming in some summer, such as Jasmine, Fusang, Jiuli Xiang, etc., should still be placed in a place with sufficient sunlight, so that the plants can fully accept light, allow the leaves to better photosynthesis, provide nutrition in time, and promote the branches of the year that year.Mature, make it safe to overwinter, and ensure that the coming year will still be leafy in the coming year.Potanic flowers such as azaleas, Clivia, Fairy, Yipinhong, and Crab Land, which bloom before and after the spring Festival, should also be placed in full sunlight and accept full -day photos, otherwise the flowering period will be delayed or even blossoming.Generally, leaf -viewing plants are more shade -resistant and can be given some light, but to avoid direct light at noon.

2. Water and Fertilizer should be appropriate

In the early autumn, especially in the late September and mid -September, the temperature was still high, and the amount of plant steaming was large. Most flowers should be poured once every 1 to 2 days.The rotten roots, fat causes long branches and leaves, affecting wintering.Some flowers blooming around the spring Festival, such as Fairy Come, Clivia, Crab Land, Cuckoo, etc., have passed the dormant period and started to enter the peak growth season. Therefore, To facilitate the formation of flower buds and blooming.

3. Prospering should be reasonable

Except for flowers that bloom early in early spring, most flowers such as jasmine, Lagerstroemia, pomegranate, etc. can be trimmed and plastic in autumn, and pruning cuts in the late autumn and early winter.EssenceRemove the sick branches, withered branches, dense branches, and long branches during trimming, laying a good foundation for the wintering of pot flowers.

4. The prevention and treatment of diseases and insects should be thorough

autumn is still the high incidence of pests and insect pests, and plants are susceptible to harm to pests such as spatial insects, red spiders, aphids, and whitefly.Diseases include leaf spots, rotten diseases of branches.Before the Potted flowers enter the room, these pests must be completely treated, and it must not be harmful to the room.If no pests are found, the drug can be sprayed for prevention.

5. Breeding should be timely

After the beginning of autumn, the temperature decreases. Some second -year -old grass flowers, such as three -color pupa, stone bamboo, melon chrysanthemum, Hollyhocks, etc. are a good time for sowing.Sowing sowing can be performed in September to October. Pay attention to water spray after sowing to keep the soil moist.There are also some wooden flowers suitable for cuttings in autumn, such as Hanging bells, rose, geranium, jasmine, leaf flower, Phnom Penh Ruixiang, etc., which are high in cutting in autumn.Root flowers such as peony and peony with dense growth of separation should be reproduced in a timely manner.For the flowers that bloom before and after the spring Festival, such as Fengxinzi, Tulip, Zhu Dinghong, etc., you should hurry up the pot.

6. Enter the room should be timely

The time for pot flowers to enter the room is different depending on the flowers.Fusang, Yipinhong, Begonia, Fairy Cala, Jasmine, Colorful Leaf Grass, Turtle bamboo and other hiweed flowers should be moved into the room when the temperature is 10 C;When the temperature is as low as 5 C, it must be moved into the room.Most flowers should enter the room before frost.Person flowers should pay attention to ventilation indoors. When the temperature is high at noon, the doors and windows can be opened and windows.

precautions for flowering flowers in winter

1. Temperaturesuitableshould

Now the housing conditions of residents have improved, and the closed balcony is very beneficial to the winter winter. If there is no closed balcony, the pot flowers should enter the room at night.At night at night, such as claw orchid, Yipinhong, Graphye chrysanthemum, Zhu Dinghing, etc., it is best not to be lower than 10 C.

Belgian Rhododendron, San Tail Aoi, Goose Palm Chai, Guangdong Wannan, Geranium, Grand Cymbidium, Pocket coconut, Fairy coconut, Chunyu, Diaolian, Su Tie, Bald bamboo, Kumilus, aloe vera, peony, kidney fern, fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern, kidney fern,Octagonal golden plates, generations, dripping Guanyin, Place, etc. The minimum room temperature is above 5 C. If the room temperature is too low, these flowers will appear yellow leaves.

2. Full light

In winter, the sun is weak, and the plants that are light or slightly shade are placed in a place where light or light is too weak for a long time, and yellow leaves will appear.Such as Milan, Yipinhong, Jasmine, Fusang, Geranium, Camellia, Fairy, Su Tie, Rhododendron, Clivia, etc. need to fully accept sunlight in winter.

3. Keep humidity

Many family flowers like high air humidity, such as Cymbidium, Phalaenopsis, Person fern, kidney fern, rhododendrons, green dill, bamboo, turtle bamboo, spring feathers, bamboo taro, camellia, and evergreen.However, due to the sufficient heating of most families in the north and dry indoor air, the leaf surface should be used to keep the pot soil moisturizing with water similar to the water, and yellow leaves should be avoided.

4. Watering appropriate amount

After winter, the temperature is low, and the water evaporates slowly, and the amount of water should be appropriately reduced.In winter, it is in a slow -growing and half -dormant plant, and the pot soil should be dry.Due to the low temperature in winter, watering flowers should be stored or dried by an appliance. Do not use tap water to pour the flowers directly to prevent the temperature difference and damage the root system.Because the temperature of the winter is constantly declining, the metabolism of flowers is slow, or the dormant state should be strictly controlled by Potted flowers.Yin -resistant flowers should avoid rotten leaves due to excessive watering.Generally, the watering time should be appropriate around noon.

5. Fertilization of fertilization

Most flowers enter the dormant period in winter, so they should try to reduce fertilization or stop fertilization.Indoor flowers that do not sleep in winter, such as ingredients, tiger tiger orchids, fishtail sunflowers, brown bamboo, and green dill. When the room temperature is about 5 C, there is basically no need for Fertilizers, so there is no need to pursue it.If the temperature is low, fertilization is prone to rot.The main reason is that the growth of the plant root in winter is in a slow state. The Fertilizer should not be absorbed by the root system. Instead, it will hinder the normal absorption of the root, and it will rot the roots in severe cases.If the room temperature is high and flowers are flowing flowers, such as melon chrysanthemums, charming, spring flowers, African phoenix fairy, fire cranes, etc., thin organic liquid Fertilizers can be applied every half month, and composite Fertilizers can also be applied in small amounts.When the Fertilizer is excessive, it should be watered in time to dilute the concentration of the Fertilizer.

1. The difference between short track speed skating knife shoes and avenue speed skating knife shoes

Speed skating knife shoes are ice shoes worn by speed skating athletes. The speed skating movement is divided into two types: short track speed skating and avenue speed skating. The Ice knife shoes are also different.

1. Different length

It is mainly because the length of the ice knife Tube is different. The short track speed sliding knife is slightly shorter than the avenue speed knife knife body.The characteristics of small, more curve.

2. Different arc

The shape of the ice knife of the two types of Ice knife shoes is different from the arc of the knife. The arc used by the ice knife used in the short track speed skating is larger than the Avenue Speed Slipper, so that it can better adapt to the game.

3. Different runways apply

Short -track speed sliding is suitable for gliding for short runways (500m to 1000m).Short -track speed skating venues are 60 meters long, 30 meters wide, and a lap length is 111.12 meters.The avenue speed skating knife is suitable for long -distance gliding in the runway. The maximum perimeter length of the standard speed skating race is 400 meters and the minimum is 333.33 meters. The inner curve radius cannot be less than 25 meters or more than 26 meters.

4. Different styles

The short -sized skating ice knife is long and thin, and for the convenience of cornering, the ice knife is not fixed in the middle of the soles, but has a certain tilt angle. Generally speaking, the left and right foot ice knife is tilted to the left for about 15 degrees.There is only one fixed point of the Avenue speed skating, which is a "slippers".

2. Can Avenue Skid Slipper shoes in a short -sighted skating knife in the short track?

Speed skating knife shoes are mainly composed of three parts: boots, ice knives, and knife support. The ice knife can be replaced. So, can the Avenue Speed Skidine Shoe Siren Speed Skidine Skidine?

The reason why the speed skids are divided into two types is mainly because the requirements of the two ice knives are different, so they cannot replace each other.Generally speaking, the main feature of the avenue speed skating is fast speed, so the speed skating knife knife is very long, the blade is narrow and flat, and the ice area is large and the frictional resistance is small.The bottom is curved, and the area of contact with the ice surface is very small. The two types of ice knife are different. The short track speed skating knife cannot be settled on the avenue skating knife shoes.

1. Is the Camping light waterproof?

Camping lights have a certain waterproof ability.

Because at the time of Camping, some camp environment is very humid, and the next day it is like a rain that was rained for a night, so the Camping light requires a certain waterproof ability;The Lights are generally Hanging under the sky curtain or inside the Tent. Only a small amount of water will be dipped. The waterproof performance is too strong and it will not play a sufficient effect.

2. Can the Camping light be drizzled with rain?

The waterproof performance of Camping lights is very important. After all, it is used in the wild environment. It may suddenly rain at night. Therefore, the Camping light needs to have a certain waterproof ability. So what is the waterproof performance of Camping lights?Can it rain?

Therefore, under normal circumstances, the Camping light cannot be used directly in the rain. There is no big problem with a small amount of rain. If it is used in the rain, it is likely to damage.

3. Wild Camping lights and waterproof levelgenerallyHow much

When going out to Camping, sometimes the environment is very humid, and even when it is raining. At this time, the waterproof performance of Camping lights is particularly important.The waterproof performance of Camping lights is generally divided by waterproof level.

The waterproof performance of the lamps is usually measured by the IPX waterproof level standard. From IPX-0 to IPX-8 to nine Levels. IPX-0 level means no waterproof protection. IPX-8 Levels can guarantee that the water surface is immersed in the water surface of 1.5 ~ 30 meters.For 30 minutes, the performance is not affected and does not leak.Camping lights are outdoor lamps. Generally, IPX-4 Levels are sufficient. It can eliminate the harmful effects of splashing droplets from different directions. It is the basis for using outside accounts and is enough to cope with Outdoor humid environment.Level can reach IPX-5 level.