1. Good or T -handle is good or T -handles.

From the perspective of the use of the wristband, it is better to go straight.The uphill uphill of the straight handle is more conducive to relieve leg fatigue with the help of the upper limbs.

When most people use climbing sticks, they are holding the handle of the Climbing stick tightly, thinking that the role of the wristband is just that the Climbing stick will not leave their wrist. If you think so, then you are wrong.The importance of the Belt is no less than the strength of the Climbing stick itself.When we use the Mountaineering stick downhill, the impact force of the Climbing stick should be transmitted to our arm through the wristband; on the uphill, the thrust of the arm passes through the wristband to the Mountaineering stick to generate uphill help.Therefore, when our wrists pass through the wristband, we should not stretch it directly from the wristband and grab the handle.Instead, you should pick up the wristband, put it in from the bottom of the wristband, press the strap in our palm, and then gently grasp the handle.Grab the handle tightly.If you have a buckle, make a little adjustment, remember not to affect the operation of the Climbing stick.

2. Is the Climbing stick that takes hands easy to use?

The climbing rod with the handle generally refers to the TD -handle Hiking stick. The Climbing stick with the handle is also easy to use. As for which handle to choose, it can be determined according to the daily usage habits and the environment.

As a mountaineering enthusiast, in order to better rely on the role of climbing rods and make the body more effort when you go up, you can choose a straight handle when choosing a Climbing stick. Of course, the bend has its advantages and characteristics.Are you general exercise or training or training. In addition, the differences in the mountains will also be distinguished in the choice. For ordinary enthusiasts, you can use a straight handle.

1. How to use fish line wheels

Method of loading

1. Put the fishing line on the fishing rod.

2. Open the fishing Ship's inverse switch, turn on the fishing wheels in line, pull out the line, close the line ring, and pass the line through the fishing rod guide ring.

3. Tie the fall line, tighten each section of the fishing rod, and close the fishing wheels to stop.

fish line wheel launch method

1. Open the fishing Ship's inverse switch, rotate the joystick, the adjustment line falls at the appropriate position, and turn off the inverse switch.

2. hook the fishing line with your index finger, turn your head on the side, send the pole back, and the pole is touched on the ground to the ground.

3. Put forward the rod on the side. When the pole is on the front and the ground holds a 45 -degree angle, the shaking force is loose and pops up.

4. When the wire falls, after the pass is over, shake the joystick, close the line ring, tighten the fishing line, and put the pole on the rod.

Method of fish line rotation line

1. Lifting rods and shake, the fishing line remains straight, and the pole is 45 degrees on the ground.

2. Shake the wheels at a constant speed, the fishing line remains straight, and the fishing wheel pine knob is adjusted with the size of the fish power.

3. After the fish is collected, put the pole on the frame. Do not touch the fishing wheels to scratch.

Way to unload

1. Turn off the inverse switch and fall down the thread.

2. Tighten your fingers and shake the joystick.

3. Put the wires on the line.

4. Remove the wheel, clean, install.

2. How to maintain the fish line wheel

Under normal circumstances, the internal parts bought from the market are applied with an appropriate amount of lubricating oil.However, the fish line wheel line is the same as other precision machines. It needs normal cleaning and maintenance after a period of time.

1. Regular maintenance

Generally, 25 fishing is a maintenance cycle.After using the fish wire for a long time, if you want to maintain the best state of the fish line, you need to apply a layer of lubricant inside the main body of the fish wire.

2. maintenance method

First remove the rocker arm and brake structure, then loosen the side cover screw, remove the side cover, and give the lines of the line of the lines, bearing, main gear and tooth pole, and the tooth oil of the tooth.Be careful when applying oil, because excess lubricant will flow to other places to destroy its performance.

3. Check in time

Whenever fishing, especially after rainy days and sea fishing, you should check your fish wire wheels in time to prevent any sewage or dirt and sand in the fish line.

4. storage method

When you stop fishing for a long time, you should maintain it once and put it dry.Before storage, use a clean and humid cotton cloth, wipe the fish line wheels, and then wipe it with a dry towel, and finally add lubricating oil.

Self -driving Tibeta precautions

Self -driving

The Sichuan -Tibet Line definitely tests the driver's driving skills. People without 200,000 driving mileage are best not to drive on the Sichuan -Tibet line. It is best to report to the team.Road conditions.It is best to invite more than two cars to enter Tibet. What is the situation on the road to take care of? Prepare the car repair and trailer Tool. It is recommended to learn about some simple car repair common sense before travel. Do not set up strangers casually.

Body

Because all this activity is on the Western Plateau, the front is long. For patients with obvious lesions with heart, lungs, brain, liver, and kidneys, patients with organic diseases, and patients with severe anemia or hypertension, do not enter the eyes.This type of disease has poor adaptability to high environment, and the risk of acute altitude disease is significantly higher than that of others.

Model selection

From the perspective of self -driving tour, considering the wear and repair of the vehicle, and the comfort of being a passenger, it is recommended that you choose an off -road vehicle with good and high chassis.Secondly, choose a large amount of large amount. The vehicle is anchoring or problems in halfway. Generally, the accessories can be found and replaced in time. If it is a relatively small vehicle accessories, it is only available in Lhasa or Chengdu.Drag to Lhasa or Chengdu repair, or waiting for accessories to be sent in place.The car tools must be available. In addition to the wheel wrench and the outer small tire inflatable equipment, it must also bring an emergency device such as route maps, the latest electronic maps, camp equipment, lighting equipment emergency lights, compass, GPS, warning sign and other emergency devices.

come on

The oil on the Sichuan -Tibet Line has changed from the original 97/93 to the current 95/92, but the entire Sichuan -Tibet Line cannot guarantee that there are 95#gasoline supply every place, and the gas stations are not very good.It is best to choose a model with rough oil.If you choose to refuel a regular gas station, you must refuel when you encounter a regular gas station.It is best to have a spare fuel tank (barrel). Do not rush forward when the car fuel tank is less than half a box of oil, because you can't predict what will happen.

stay

The peak accommodation hotels along the Sichuan-Tibet Line: about 300-500 yuan, off-season: 200-300 yuan, the cheap is about 50 or 60 yuan.Reminder: It is recommended to book hotels in advance during the peak season.Try to choose to stay in a relatively low altitude.The altitude is more than 3000 meters, and the altitude altitude reaction at night is obvious, which affects rest.

FOOD

The Sichuan -Tibet Line is all opened by Sichuan people. It is cheap and delicious, with an average consumption of 120 yuan/day/person.You can bring some fruits and snacks, and it is expensive to buy on the road.

car rental

Sichuan-Tibet car rental is charged a day, off-road vehicles 500-1100 yuan/day, commercial vehicle 300-800 yuan/day; commonly used models: off-road vehicle land tour 900-1100 yuan/day, Prado 700-900 yuan/day, HanlanIt reaches 550-700 yuan/day, Tiguan is 450-600 yuan/day, Haval is 450-500 yuan/day, and the Buick GL8 business car is 400-500 yuan/day.

custom

You must know how to enter the countryside and follow the customs, and respect the living habits of local Tibetans.Their lifestyle may not be civilized, but it is very suitable for the local environment.For example, do not like to take a bath, urinate at any time.It is necessary to change the concept on the plateau and get used to the open -sky toilet. It is recommended that female friends can bring two umbrellas. The Sichuan -Tibet line is scarce and wide, and it is not convenient to go to the toilet.

Preparation item

The first category: clothing, shoes and hats

(1) Dressing: winter clothes, three -piece clothes are the best (warm -warm sweaty underwear grasping velvet jacket, jacket fast dry jacket)

(2) shoes: Anti -slip waterproof and warm high mountaineering shoes (resolutely eliminate high heels), you can prepare hiking shoes, sneakers, and a pair of simple slippers

(3) Small parts: sun hats, gloves, headscarves, underwear, socks, socks

The second category: daily supplies category

(1) Washing Skin care: toothpaste, toothbrush, shampoo, shower gel, facial cleanser, toner, moisturizing cream, sunscreen (more than 50 times, important essential), Lipstick (important must), hand cream, hand cream, hand cream, hand cream

(2) Auxiliary tools: Sunglasses (important essentials), insulation cups, rain sets, flashlights or headlights (prepared battery), garbage Bags

Third category: food category

(1) Energy: chocolate, beef stick, etc.

(2) Filling hunger: biscuits, bread, cake, etc.

(3) Moisturizing: Various fruits, mineral water, etc.

(4) Said meals: mustard, kelp shreds, radish, etc.Sichuan cuisine along the way, uncomfortable players can bring their own delicious dishes.

Fourth category: medicine category

(1) Spare drugs: Personal common medication (according to personal physical condition, carry as appropriate. medicine conditions on the plateau are backward, please prepare the required dose);

(2) It is recommended to carry: oxygen and medicines that prevent the altitude response should not be less, with a portable bottle of oxygen, cold medicine, gastrointestinal medicine, motion sickness drugs, dissipation or headache powder, glucose (powder or oral solution)Essence, mosquito repellent water, plateau security.

(3) Preparation for groups: Hongjingtian's oral solution needs to be taken for more than 15 days before the group.

Category 5: Photography Communication

(1) communication equipment: mobile phones (the best telecommunications signal, good mobile signal two, Unicom signal is not good), intercom, and related chargers.

(2) photography equipment: SLR camera, telephoto lens, wide -angle lens, three tripods, photography Bags, rain cover, and large memory cards and related chargers.

(3) Auxiliary tools: long skirts, cool clothes, scarves, shawls, all kinds of decoration, stinky, dating artifacts.

Category 6: Certificate Category

Vehicle insurance certificates, driving licenses, driving licenses, ID cards, bank cards, passports, and some documents that can be exempted from tickets, bring enough cash required on the road. The bank card is best from UnionPay.It is not until Bayi and Lhasa to have CCB and Bank of China, and there is no ICBC on the Sichuan -Tibet line.

Seventh category: luggage category

(1) Big Backpack: Each person is limited to a large Backpack (below 70L) or a suitcase (less than 26 inches).

(2) Small Backpack: A must have a small Backpack for a small Backpack, which can be used in the scenic area, carrying some snacks and water.Disable shoulder Bags or handbags.

(3) Bags: It is recommended to bring a pocket and put some valuables.

Apply for a certificate

At present, there are 19 border counties in 74 counties (districts) in Tibet to enter the "Border Pass" to enter. These 19 border counties are in Nyingchi, Shannan, Shigatse, and Ali.

How to apply for a Tibetan border certificate?

Before departure, it can be handled in Lhasa after the household registration is located, but it is more troublesome to handle it in Lhasa.

Dangerous area into Tibet

Erlang Mountain

The Erlang Mountain is the first level of the Sichuan -Tibet line between Ya'an Tianquan and Ganzi Luding.Ya'an, also known as "Rain City", is due to its annual rainfall, rain will cause the surface to loosen, and the soil viscosity cannot be sticky enough.It even destroyed the last point safety factor of the Tianshin Global area.The scouring of rainwater and the instability of the crust is the biggest reason why this land collapsed debris flow.

Zonglashan

Cross the Haizishan, cross the Jinsha River, enter Tibet, and take your eyes back from the landscape of the Jinsha River Bridge and the Jinsha River, because you are about to enter the two dangerous sections of the Sichuan -Tibet Line, Zonglashan, there are all different roads on the road.Site gravel, because this is also a high -risk area that occurs in the landslide, especially after more than ten kilometers after the Jinsha River, you can clearly see the huge landing stone lying in the Lancang River on the side of the road.

Mountain

The Sichuan -Tibet Line Mangang to Posmi Road is one of the three insurances of the Sichuan -Tibet Line. It is built on the mountains and the mountain roads. There is no guardrail on the opposite side. When you drive, you can see the Nu River under your feet.It will pass more than 5,000 Eastern Mountains, as well as the legendary Tianlu 72. This road is more representative of the Sichuan -Tibet line and the road conditions are dangerous.

Bright cave

Generally, in March each year, the Sichuan -Tibet line enters the tourist season. At this time, the ice on the road is basically melted, but because the sun cannot be exposed to the sun, there are many dark ice. If you dont pay attention, you do nt pay attention to it.The probability of car accidents is particularly high, and these dark ice will last until May and June.In the Bayu County, the Mingdong between Wuhu is the longest -distance Mingdong on the entire Sichuan -Tibet line, and several places are a few kilometers long.Therefore, the danger index is particularly high in this road. When the Mingdong here, the speed cannot exceed 10 kilometers per hour.

1. What Flower pots are better for balcony flowers?

1. Burning pot

The vegetarian pot is the mud tile pot. It is the most commonly used planting container. It can be divided into two types: red and gray pots. There are various specifications. The smallest diameter is about 10 cm, generally 14 ~ 33 cm, and large ones 39 ~59 cm.The water and exhaust drainage performance of the plain pot is good, which is conducive to plant growth. It is widely used in the cultivation of seedlings and the cultivation of seedlings.The lack of this Flower pot is rough, so when cultivating the finished seedlings, you should try to use a small pot as much as possible so that you can place it in a slightly larger basin when displaying the decoration indoors to make up for the shortcomings.

2. Zisha pot

Various flowers and plants are engraved on the purple sand basin, with a variety of styles, harmonious colors, simple and elegant, and antique beauty. It is more suitable for small leaf species for small leaf species on the indoor countertop.The disadvantage of this basin is that the water permeability of the water is slightly worse, and the appropriate species must be selected when used.

3. Plastic basin

Plastic pots are one of the commonly used plant containers for indoor leaf -viewing plants. They can be divided into hard plastic pots and soft -holding plastic basins.Hard plastic basins are generally small in size, light and beautiful, colorful, and are mostly used for viewing and cultivation, but their ventilation is poor and not conducive to growth. Therefore, it is not suitable for long -term planting.It is only used, and it must be loose, ventilated and drained multi -porous substrates with good ventilation and drainage performance.The soft plastic basin is only used for the nursery of indoor leaf -viewing plants, and is generally not used for ornamental cultivation.

4, glaze basin

The glaze pot is strong and gorgeous, but the drainage ventilation performance is poor.It is often used as a pelvan, which can also be used directly to cultivate large leaf -viewing plants, but it must be equipped with loose porosity matrix, otherwise the plant growth is poor.

5. Wooden basin

The wooden basin is used to cultivate large leaf -viewing plants and can also be used to cultivate some fleshy.Its specifications can be determined according to actual needs.This kind of inside and outside of the pot can paint different colors to improve the service life and coordinate with the color of the plant.It has a light scenery, good breathability, strong water and Fertilizer, low cost, and low cost. It is suitable for planting of various flowers. In addition, it can also be determined and processed according to the shape, size and cultivation of flowers according to the shape, size and cultivation of flowers.This pot is easily rotted by the erosion of water, Fertilizer, and microorganisms, and has a short service life.

6. Cement basin

Cement Flower pot is usedCementPlaced it.It is simple, with different shapes, and moderate weight, but it is suitable for garden and balcony greening.

7. glass basin

The glass Flower pot is not breathable and cannot be watered.The glass is transparent and you can see the internal moisture.In summer, the glass Flower pot must be placed in a cool place.Put the water layer with a glass Flower pot, and you can use pottery or large light stones.The glass flower is suitable for leaf insertion.

8.Porcelain basin

Porcelain pots are fired with porcelain soil, which is the best in the ceramic basin.It is bright in color, beautiful in appearance, and many varieties of color, but it has poor breathability and water seepage. It is difficult to master the wet and wetness of the pot soil with this pot.It is best not to plant flowers directly, only suitable for flowers for flowers.

In addition, there are all kinds of materials for decorative materials, such as glass tanks, vine products, stainless steel clads, etc. This type of pot is beautiful and generous, which can add a gorgeous and colorful atmosphere.But for display, not cultivation.

Second, the choice method and skills of Flower pots

1. Breathable,The bottom of the Flower pot must be opened. The function of the hole is to enhance the permeability of the pot soil, ensure that there is sufficient oxygen in the soil, and enhance the drainability of the pot soil.

2,Practical, although the appearance is important, it also needs to pursue practicality.If a flowerpot with a diameter of less than 7 cm, it is best not to buy it. Although it looks good, it is not suitable to buy it like a wine glass. In the end, you can only throw it aside.

3. If you plant vegetables, you can choose a rectangular, large -scale plastic basin, so that when sowing, it will not be too dense, and you can plant more. It is especially suitable for planting leeks.The space is well used.

4,For fruit trees, it is best to choose a larger, tall and deeper porcelain or plastic basin.In this way, you can install enough soil. The nutrients and nutrients of the fruit trees are not too big. It is still necessary to consider the load on the balcony and terrace to avoid affecting safety.

5. Many friends ask, can the wooden basin grow things, can it grow succulent?The answer is certainly possible, but the use of the wooden basin is relatively short. Although the planting plants are pretty, it is easy to be moldy and rotten for long -term watering.

6.Fairy balls are succulent. You can use smaller cartoon and cute pots to add many lively atmosphere to your home or balcony.Because the fairy ball does not need to fertilize frequently, the Flower pots with a diameter of about ten centimeters are almost enough.

7.Pay attention to environmental protection. Try not to use a one -time, light and thin plastic basin. It is not durable and polluted the environment. It is best to use a few years of pots.

three,How to choose Flower pot size

When choosing a Flower pot, pay attention to the size, and the height should be appropriate.The Flower pot is too large, just like thin people wearing large clothes, which affects the beauty, and the Flower pot is large and the plant is small. The water absorption ability is relatively weak.After watering, the pot soil is kept moist for a long time, and the flowers and trees are difficult to breathe, which can easily lead to rotten roots.The Flower pot is too small, it looks heavy and light, and affects the root development.In addition, the size and height of the Flower pot are available for reference:

1. The diameter of the Flower pot should be generally lined with the crown diameter of the plant.

2. Plants with mud balls. After putting in the Flower pot, there should be 2-4 cm gaps around the Flower pot to add the new soil.

3. Plants without mud balls, after the root system is put into the Flower pot, it must be stretched and should not be bent.If the main roots or the roots are too long, it can be properly trimmed, and then plant it into the pot.

1. How to use the Bicycle code watch

The working principle of the bicycle sheet is that the sensor captures the information brought by the inductive magnet when the car rotation is rotated. The sensor code is transmitted to the code watch.

Function display

1. Automatically display.Press the function button (the big button below the code watch), and only the word AUTO appears. At this time, the code watch automatically displays the riding distance, time, total mileage and clock with a interval of 1 second.

2. Manually display.Press the function button, the word KM appears, indicating that the travel distance is displayed at this time;

Press the function button to appear alarm clock pattern, indicating that the travel time is displayed at this time, and the accurate display of the second;

Press the function button, and the word appears, indicating that the cumulative cycling distance that starts with the code watch at this time is displayed.

3. The code watch is clear.Pressing the function button is not less than 3 seconds. At this time, the numbers on the code flickering are flickering. Continue to hold it until the clear is cleared. The clear zero does not affect the cumulative riding distance.

Use setting

This function determines the correct use of the code watch, which is very important.The main function is to enter the car wheels, adjust the clock, change the speed unit, and turn on the automatic display function.

Enter the setting interface.Press the setting button on the back of the code watch for 3 seconds, and set the word, that is, enter the settings interface. At this time, the four -digit number displayed below is the wheel length. At this time, press the function button to enter the next function settings interface.

Exit the setting interface.Press the settings key for 3 seconds to return to the use state.

2. How to install the Bicycle code watch

1. Install the base of the code watch.

First install the base of the code watch. The back of the base has foam glue. Tore off the yellow plastic surface, you can stick it on the handlebar, and then use a rubber band to walk around a circle, stuck in the card slot on both sides of the base.The bottom of the code is firmly fixed on the handlebar.

2. Next installation header.

The inductive line is wrapped around the brake wire, until you need to install the position of the sensor, the sensor can be installed in the middle of the axle and the brake in the front of the front rod.

The installation method is similar to the installation base. After selecting the position of the sensor, press it with your fingers, and then use a large rubber band to circulate around the car, and buckle the rubber band into the card slot of the sensor.

3. Instant induction magnets.

The induction magnet needs to be installed on the steel wire banner of the tire, which can be facing the position of the sensor.After the soft magnet is put on the steel wire, the iron rings in the installation bag are stuck from the bottom to the groove of the magnet from the bottom to the groove.This is the best induction effect.

After this code is installed, the next time the wheels are adjusted, so the data read is accurate.

4. Setting perimeter parameters of bicycle codes

How to set the wheel diameter of the bicycle codes?Put the code watch with an angle of 45 degrees on the base, press it slightly, and rotate it counterclockwise.Then look for a straight line on the road. Generally there are cement floor. People ride on the car and adjust the nearest position of the valve core of the tire to keep the nearest position on the ground.The distance between the measurement is the perimeter of the wheel, so the measurement is more accurate than the reference value of the tire on the instruction manual, because when the person is riding on it, the tire pressure will change.The value is fine.Specific settings can be adjusted to the WHEEL SIZE menu and fill in the preset value.

Kind tips:The setting of the Bicycle code watch needs to be set according to the purchased code table brand, as well as models (such as mountain vehicles, road cars, and station wagons). Different brands have different models with different code table settings.Different brands and different installation details. Different models generally need to understand when debugging the code table data.Therefore, carefully read the manual before installing the bicycle codes.