How can the correct installation method of fish drift be tied to the fish line with different types of buoy?

1. The correct installation method of Fish drift

In fishing activities, the proper installation of Fish drift is important for fishing. Fish drifting is the eyes of the fishermen. It can reflect the situation of the fish bite and help us grasp the underwater situation. So how to install the Fish drift?

1. Choose the right Fish drift

Choose the right Fish drift according to factors such as fishing environment, deep water, and water flow.

2. Install Fish drifting seat

Put the Fish drifting on the fish line to ensure that the Fish drifting seat is close to the fish line.If necessary, you can use a silicone Tube or other materials to increase the sealing effect.

3. Install Fish drift

Insert the fish into the Fish drift to ensure that the Fish drift and the fish line are vertical, and then adjust the position of the Fish drift to achieve a suitable depth.Generally speaking, the tip of the Fish drifting should be about 1-2 cm below the water surface, so as to ensure that a small angle can be formed below the water surface, thereby more sensitively reflecting the situation of the fish bite hook.

4. Fixed Fish drift

Use space Beans or rubber rings to fix the fish on the fish line to ensure that the Fish drift will not slide or fall off.Space Beans and rubber rings can be purchased in fishing gear shops or made by themselves.

5. Adjust buoyancy

Adjust the buoyancy of Fish drift as needed.If you need to increase the buoyancy, you can add foam or other lightweight materials to the Fish drift; if you need to reduce the buoyancy, the amount of foam or other lightweight materials can be reduced.

6. Test

After installing the Fish drift, test to ensure that it work normally.Hang the hook in the water and observe the reaction of the Fish drift.If the hook is not hung on any item, the Fish drift should be kept below the water surface; if the hook is hung on the items, the Fish drift should rise quickly or move to different positions.

2. How to tie different types of buoy to the fish line

The buoy is also called float and Fish drift. It is one of the indispensable tools when fishing. It is also one of the important indicators to measure fishing technology and experience. Generally, Fish drift is tied to the fish line. According to the different forms of Fish drift, the installation form also forms the form of installation.Not the same:

1. The method of vertical floats to the fish line

The vertical float is also called a Taiwanese fishing float, which refers to a fishing Tool that conveys the information of the fish swallowing the bait and the location of the place where the bait is.From a structure, floats are divided into three parts: drifting, drift body and drift tail.If the material is divided, it is mainly Balshan floating, reed floats, feathers floats and nano -floating.

The steps of vertical floats to the fish line:

(1) Put into two space Beans on the main line.

(2) Then put into a drifting seat. Be careful to match the size of the floating drifting feet. Do not be too large or too small.

(3) After entering the drifting seat, two space Beans are installed to lock the drifting seat.

(4) Then put into the lead leather seat and tie the eight -character ring.

(5) Insert the float foot into the drifting seat and complete the connection between the float and the main line.

2. The method of spherical floats to the fish line

The spherical float, also known as the sea pole ball drift, is generally ABS material. From the structure of the structure, the float is mainly divided into drift tails, belly and drift tip. There is a round hole in the drift tip.of.

Steps of spherical floats to the fish line:

(1) Different from the hand pole, the spherical floats generally do not need to drift the seat, but use the connector to connect the main line to the float.

(2) Similar to the installation steps of the stand -up floating drift, two space Beans are fixed on the main line on the main line.

(3) Put on the other end of the connector into the reserved hole of the drifting tip and lock it to complete the installation of spherical float.

2. The method of seven -star drift on the fish line

Qixing Drifting is mainly used for traditional fishing. Qixing Drifting refers to seven different colorful Beans with different colors. Each eye -catching bean can be worn on the fish line like space Beans to pass the role of eating hook signals.Its color is generally three types of red, yellow, and red and yellow. In addition, there is also a fluorescent seven -star drift loved by night fishing enthusiasts.

The steps of seven stars drift on the fish line:

(1) Take a pack of seven stars.

(2) Put the Qixing sequentially on the main line according to the method of installing space Beans.

(3) Then use two space Beans to fix the last leading leather seat, and install an appropriate amount of lead Skin weight on the lead leather seat. If you use a dumplings with heavy weight, you can ignore this step.

(4) The fish hook can be used for fishing, and the seven -star drift installation is completed.

4. The method of the horizontal float on the fish line

The horizontal float is also called automatic bottom -free dot drift. It consists of three parts: Zhongtong wire ring, drift body and drifting bodies.The point wave line is mainly composed of drift -assisted lead pendants, buffer beads, dot drift, main lead pendant, and link buckle.Generally speaking, the main lead pendant is more important than auxiliary lead pendants, and because the buffer beads and lead pendants can be slid at random, so you do nt need to adjust the bait into the water to find it automatically.When the fish bite hook, the auxiliary lead is driven, the water line is pulled, so that the floats are swinging up and down, forming a wave effect, so it is named a little wave floating.

The steps of the horizontal float on the fish line:

(1) Pass the main line through the auxiliary lead and buffer bead.

(2) Pass the main line through the wave float.

(3) Then pass the main line through the buffer bead and the main lead.

(4) Tie the main line on the connection buckle or the eight -character ring.

(5) Tie the sub -line group on the connection or eight -character ring, and hang the bait to fish.