How to choose wooden floor moisture pads to lay wooden floor moisture -proof pads, what should be paid attention to?

How to choose wooden floor moisture pads

1. Look at the type of floor mat

1. Ordinary floor mat

The most widely used is ordinary floor mats made of polyethylene, which is low in cost.The difference in quality is mainly due to the thickness of the ground cushion and the material used on the surface.When you buy it, you can see its toughness, and the toughness of good floor mats is also very good.

2. Aluminum film pad

Aluminum -film pads are generally pasted with aluminum foil on the plastic floor pad, which is relatively well -sealing and moisture -proof.When purchasing the aluminum film pad, pay attention to whether the aluminum film and plastic film on the surface should be tightly bonded. The aluminum film of the good aluminum membrane pad is not easy to fall off.In addition, it is necessary to pay attention to its environmental protection. Before installation, you can open the rolled ground pads. Whether there is any irritating smell when you smell it. If so, you must refuse to use it.

2. Look at the thickness of the ground

The floor mats should not be too thick, usually around 2mm.If it is too thick, the room has a large room for a lot of time, and it is easy to cause the floor to be arched and cracking.

Third, look at the brand

The quality of the product of large brands is often guaranteed, after -sales service is good, the production process technology is mature, the price is also reasonable, and the national supervision is also strict. Consumers can buy suitable wood flooring pad products according to their actual needs.

What should be paid attention to when laying wooden floor moisture -proof pads

1. The keel is solid on the ground to be flat

The ground is not tidy to hang some flooring and keels, and the floor is easy to make a noise.If the wooden keel is not strong, it is easy to produce the same situation, so you must check it after the wood keel is paved.You can get your feet on the wooden keel. You can check whether the wood keel is firm by shaking your feet. If it is not enough, you need to reinforce it.

2. Pay attention to keel and floor fixed

The fixing method of using wood wedge and iron nails will cause insufficient grip power due to the small contact surface of the wooden wedge and the iron nail, which can easily cause the wood keel to loosen, and it is easy to have no sound when walking on it.The fixation of the floor and the wooden board, if it is not rail pavement, it needs to be fixed with nails.The selected nail is best for the special thread of the floor. Drill the hole with a pistol first, and then fix it.

3. Dragon must be dry and moth -proof

Generally, the water content of the Solid wood flooring is 12%. The wooden keel must be dry, so that the wooden floor will be rapidly moisture due to the large humidity difference, resulting in the arch of the floor arched and the paint surface burst.The Solid wood flooring has a good logic and is prone to raw pests. Therefore, it is necessary to put camphor wood chips in the wooden keel. The standard is to put a thousand grams of camphor wood chips every 8 Square meters. Pay attention to put it evenly.

4. Pay attention to color difference problems in advance

The color of each Solid wood flooring will be different, so before the formal layout, choose a floor with similar colors and textures to make the overall pavement effect.It should be noted that when the floor enters the field, it is best to check the quality of the floor by touching and visually inspecting. If you have any problems, you can find and change it in time.

5. There are a lot of moisture -proof pads

In order to avoid the water and gas on the wall to "infect" the Solid wood flooring, when laying a moisture pad, it must not only cover the entire wooden keel, but also pay attention to leaving about 10cm up along the corner of the moisture.At the same time, 8-12cm telescopic joints should be left between the wooden floor and the wall surface. If it is too close, it is easy to arched after the floor expands.

6. Do not forget the flooring of flooring

After paving the first row of floors, the installation staff should prevail through the straight line. If you need to adjust it immediately, it will affect the launch of the floor of the floor.There are no gaps in the middle, to ensure flatness.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;