Special Mic How to clean Lu Chong board, how to maintain Lu Chong board
1. Skateboard rubber rubbing
This method is suitable for using the large parts of the Lu Chong plate. clean some dust or leaves to buy supporting steel brushs to remove stubborn stains such as soil, or gum.
The use of cleaning soft mud is more suitable for small partners who are suitable for obsessive -compulsive disorder and inconvenient partners who are suitable for obsessive -compulsive disorder.The use of cleaning soft mud to clean the land punching board is not so violent, which is more suitable for simple cleaning and cleaning.
3. Interior cleaning agent
The interior cleaning agent must be free to wash.Some Luchong plates are colorful porridge or sandpaper, which is very not suitable for us to clean it in traditional ways. You can choose to use the interior cleaner. After spraying, you can use a soft hair toothbrush to get stubborn stains twice.
How to maintain Lu Chong board
1. Plate maintenance
Do not soak water on the plate. This water is soaked in water for a long time, that is, do not put the Lu Chong board in a humid environment.Secondly, don't bump the surface of the plate.The bumps on the edge will make the board beside the edge, and the internal force of the board will disintegrate the board from the inside when gliding in the future.
2. Wheel maintenance
Remove the wheels and carefully remove the pads and nuts.Remove the bearings and shake it in the alcohol prepared in advance for five minutes to remove the dust and sand in the bearing.Later, let the bearings static in industrial wine for one to two hours.While the bearing is static, clean the nuts and pads removed before cleaning with a wet paper towel.Use a wet tissue to clean the board, take out the bearings, blow dry and dry the bearing to the opposite side, repeat several times, and blow dry the bearing inside as soon as possible.Spray the lubricant on the bearing, let the lubricant slowly immerse in the bearing, rotate the bearings, and let the lubricant evenly attach it to the bearings.Wit wipe the bearing surface with a dry towel to remove the lubricant that is adhered to the surface.Put the bearing back into the wheels, and then load the pads and wheels back to the distance in order.Turn the wheel and enjoy the Lu Chong movement.
3. Book maintenance
The characteristic of Lu Chong plate bracket is to maintain stability. For the support of Lu Chong board, the most important thing is to change the side nut.Whenever you find that your side nuts have a sliding silk, hurry up, otherwise add rust and dust to the back, and it will not be easy to twist it.
4. Sandplate maintenance
The choice of early sandpaper is more important than maintenance, and good sandpaper can reduce a lot of maintenance.For the maintenance of sandpaper, first do not let the sandpaper dip the water. This water refers to our sweat. After all, the sweat droplets are dripped on the plate, and the dust is fatal, which increases the difficulty of cleaning.The second is to avoid high temperature and exposure. Sanded paper is glued to stick to it. High temperature and exposure will cause sandpaper to fall off.
Can Lu Chong board be washed water?
Lu Chong board cannot touch the water. If the bearing of the land surf panel encounters water, it will rust and eventually damage; the friction force of Lu Chong's sandpaper will be reduced after touching the water, and there may be safety in the process of exercise.Hidden dangers; Lu Chong board will gradually lose elasticity after encountering water.