How to install the GPS positioner of the GPS positioner, the installation method of the GPS positioner

How to install and use the car GPS positioner

1. Find a thread

Consume whether the required terminal accessories and wiring tools are complete.

There are only 3 lines of the simple GPS positioner that need to be connected, so find out the few lines of the bold font in the car first.

GPS positioner red line car power supply positive pole

GPS positioner black line car power supply negative electrode

GPS positioner white line car ACC/key line (detect the engine switch status, must be connected)

2. Install the SIM card

Many friends do not understand why the GPS positioning system should install a mobile phone card. In fact, the SIM card plays an important role in the GPS positioning system. Simply putThe GSM network transmits positioning data to the specified background in the form of GPRS, and finally forms a positioning monitoring system.

Note: Please make sure that the GPS positioning terminal is inserted into the SIM card without power power, and it is easy to burn card.

After SIM is installed, please turn on the spare power switch (on the side), and confirm that SIM will not loosen.

3. Wiring

After installing the card, go back to the first step.Install the line order of various colors to ensure that the joints are not loose or water.Please use the standard car circuit wiring method to connect the wiring process. Do not perfunctory.Instead of wiring, on the one hand, it is easy to make the GPS locator fail to work, and there is a hidden safety hazard for short -circuit fire.

The wire head should be protected with a thermal Tube to ensure that it is not easy to fall off and not inlet.Then bundle it with a waterproof tape and tied with the original car line.

4. Terminal fixation

The GPS positioner is small and easy to conceal.The common fixed position is to remove the main driving/co -driver front baffle. In its internal space, there are underground seats, trunk and other places.On the one hand, it is ensured that the GPS antenna can receive satellite signals normally, and it can ensure that the vehicle is not easy to enter the water and causes the terminal to burn.

Notice:

(1) The GPS antenna (such as the lower black block) signal is easy to be blocked by mixed soil and metal substances, and plastic, human body, fabric, etc. have no effect.Therefore, when fixed, make sure that there is no metal substance cover above the signal receiving surface to ensure that the receiving surface can be facing the sky upwards.It brings fixed flatness through the magic sticker or plastic tie, so that it will not fall off in long -term use.

(2) When the GPS positioner is fixed, there is no distinction between up and down. The terminal can be fixed and fixed through the magic sticker and tie.There will be abnormal noise.

5. activation

After all the above steps are completed, the vehicle is restored.Then activate the license plate number, terminal ID, SIM card number and other information to the Bo Shi customer service personnel, so you can locate the vehicle and manage the vehicle in the computer, mobile phone, and WeChat.Since then, the installation of the GPS positioner is completed.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;