How to install the Hook Hook for the Hook Hook

1. High installation of clothes hooks

1. Xuanguan

You can judge according to your family's height, so that everyone can get items. Generally, it is better at about 1.6 meters.It should not be too low, so you need to bend over with things, and if the clothes and buns are too long, you will mop the floor.

2. bedroom

Like in the porch, the height is more convenient to get items. Now there are coat hooks that can be hung directly at the top of the door, and the door of the bedroom will not be particularly high, so as long as you do not install too low.It is recommended to be a little taller than yourself, so as not to accidentally hit the hook.

3. bathroom

The installation height of the bathroom hook is also very important.Generally speaking, the installation height of the bathroom hook can be determined according to the height of the family, usually with 10 mm on the basis of the minimum member height.Such height will be more convenient when using a coat hook.You can also install the hook on the right side of the mirror to make the towels more comfortable and convenient.

2. How to install the hook

1. Positioning

The installation position of the hook must be determined, including width and height.There are single -clothes hooks and row hooks. When installing a single hook, a few clothes hooks are usually installed into a row of combinations. ThereforeThe width of the installation surface is reasonably calculated, and the distance between the single hook is divided to ensure the beauty after installation.The rowing hook does not have a width trouble. As long as the width of the installation surface is sufficient, it is generally installed in the middle position, so that the distance between the left and right sides is equal.

For height, it refers to the height of the hook from the ground. Generally, the height of the family is used as a reference. It is advisable to be about 1.5 meters to 1.8 meters.Beautiful; if it is too high, you need to stomach or step on a small bench to hang, so it is inconvenient to use.Therefore, the installation position of the positioning hook is very important.

2. Pole

After determining the installation position, it is best to draw the hole position with a marked pen, and how many holes are needed.Then use an electric drill to punch.However, pay attention to the size of the hole, and generally refer to the size of the hole on the hook.

3. Fixed

After the holes, you can put the expansion bolt into, or the wooden pillow, and determine the corresponding bolt according to the material of the coat hook.Then align the hook to the bolt, and finally use the screw to tighten and fix it.However, when the screws are screwed, pay attention to the flatness of the hook, which must be kept horizontal with the ground, and it must not be skewed, otherwise it will affect the effect of the clothes hook and the beauty of installation.