How to install the Mu Gao flute tent installation steps

How to install the Mu Gao Flute Tent

1,First of all, choose a Tent where the terrain is relatively flat, and the ground should be cleaned.

2,Put the inner Tent on the ground, take out the folding Tent pole, straighten each section, and connect it into a long pole. Put on the Tent rod cover on the Tent according to the instruction manual. Generally, it is a cross.

3,After both rods are worn, you can then insert one head of each pole into the small holes on the corner of the Tent, and then cooperate with the two people, hold the two heads, and put the pole inward.Get up.

4,Until inserting other heads into small holes, the Tent was basically formed after inserting it in, of course, it was just a rough outline.

5.If you want to be firm, you must use your body to bite the cross of the Tent pole, and then think about the orientation of the door. You can insert the Tent with a nail in the four corners into the soil.The bottom of the account is well supported, so that the entire Tent is drum.

6.Put the inner account in the open account (this step is to pay attention to the uniform of the door and outside the account, otherwise it will not be able to go in). The four corners of the inner account correspond to the four corners of the Tent.

7.Some tents are nailed around the four corners of the inner account with the four corners of the foreign account. See if there is a ring that can be nailed to the ground.The distance, because it will not get wet when it rains.

8.There are some ropes on the external account, which is used to strengthen the Tent, but there is no big wind to use; but it is best to pull people who do nt pull the rope without pulling the rope and not being afraid of sleeping.

How to collect the Mu Gao flute Tent

1. First move all the items in the Tent, and then unlock the four spring buckles from the eyes of the Square Tube so that the Square Tube can be moved.

2. Two people stand relative and stand on the vertical folding of the canopy bracket to ensure that when they are hard, the top canal can be folded up.

3. Then each person holds the two brackets of the Tent with both hands, push the bracket in the direction of the opponent, and fold the Tent stent.

4. After folding to a certain degree, you can remove the Tent fabric and place it flat on the ground.

5. Dry the dirt and water stains on the surface of the tarpaulin, then fold it and put it in a dry place. Do not press the heavy object on the tarpaulin.

6. Finally, remove the top of the canopy, collect the brackets of the four feet, and push the inner Tube, so that the Tent is put away.

7. After the Tent is put away, you need to pay attention to put the Tent in a completely dry place. Try not to put other items on the Tent, so as not to cause the waterproof glue strip material to be bent at the bending of fatigue and produce a dehydration.Lose.

[Mu Gaosi Mobigarden Tent purchase & gt; & gt;]