How to open the Blade Blade Ice Knife Shoes Blade Blade Standard and Precautions

1. How to open the blade with speed skating knife shoes

The just -bought Ice knife shoes need to be used to use it. The ice knife is not open because the blade is blunt, and it cannot be eaten on the ice.There are generally three blade methods of Ice knife shoes:

1. Mechanical grinding

Motorcycles are processed by professional machines.

2. Semi -mechanical grinding

Use sand wheels to grind the blade. Due to the large wear, it is only suitable for rough grinding, and then manually polished.

3. Manual grind

The cost is low and the effect is good. People who have high requirements for skating quality are manually grinding by themselves.Speed skating knife shoe handmade grinding is generally flat grinding: fix the ice shoes on the grinding shelf, bring gloves, and carefully check whether the two knives are on the same plane.You can use the large sand wheels back and forth a few times to see if the grinding marks are uniform.After confirmation, use the large sand wheel (30cm diameter) to make the "8" shape, until the burrs appear on both sides of the blade, and the rough grinding is completed.Then use coarse oil stones to continue making "8" fonts until the grinding traces are particularly small. After removing the knife surface and the burrs on both sides with fine oil stones, a pair of shoes is worn.Remove the ice shoes and clean the surface dust and residue.

Second, Ice knife and shoes are standard

To what extent to open the blade of Ice knife and shoes is a question that many friends are more concerned about. In fact, the Ice knife shoes have no specific labeling. Generally, the thumb is dried up.There is a depression.

3. precautions for Ice knife shoes

1. If the blade requires a high blade, you can choose to grind the knife, but if you are not a professional ice skaters, it is not recommended to choose hand -grinding, because the degree of grinding when the knife is grinded is difficult to grasp, it is easy to put the ice knife knife.Follow.

2. In order to prevent the damage of the blade and reduce the service life of the ice knife, it is recommended that beginners and enthusiasts try to choose professional mechanical grinding when grinding the knife.

3. The skate -Ski knife is a fine work.

4. The knife of the ice shoes has two blades inside and outside. Before the ice knife, you must first see if the inside blade is as flat as the outer blade.

5. Beginners are afraid of falling, and often use the inside blade to contact the ice surface. After a long time, the inside blade is lighter than the outer blade. At this time, you must first use the flat wheel to make the inside blade generally high, and then use the grinding gap.The sand wheel grinds a gap between the inside and outside.

6. In order to ensure the flatness of the ice blade surface, the eyes must follow the ice knife closely to avoid wear.