How to produce a good mechanism of charcoal production process process of mechanical charcoal production process

1. Mechanical charcoal production process process

Mechanical charcoal is a charcoal produced with charcoal machines. The process of producing charcoal in charcoal production machine equipment is divided into four steps:

1. Broken

Prepare the raw materials of charcoal and put them in the crusher. The crushing quality and quality are an important step in the quality of the manufacture of charcoal. After repeated testing and experiments by the engineer, the raw material of the charcoal machine is crushed to 3 mm of 3 mm.The following can be better formed. If it cannot be fully crushed, it is recommended to use 2 crushed or 3 crushing.

2. Dry

After the crushing machine is crushed, the raw material is transferred to the dryer, and the dryer dry these particles, so that the material can reach a certain degree of drying.Generally, only the prerequisite for producing a good quality charcoal between 6%and 12%of the water content is between 6%and 12%.

3. Make stick

After crushing and drying, it has entered the key steps of charcoal manufacturing. This step is generally used to complete the rod machine. The raw materials with a certain degree of drying are suppressed into a rod through high temperature.

4. Carbonization

The products obtained by making rods are generally called salary rods. It is not the charcoal of the finished product. The charcoal of the finished mechanism must be treated by charcoalization. It is only the mechanism charcoal after cooling.

2. How to produce good mechanism charcoal

A good mechanism is charcoal, high carbon content, beautiful appearance and firming, high hardness, and high burning temperature, but it is not so easy to produce high -quality mechanisms.In terms of aspect:

1. The raw materials are critical

The production of charcoal is the most important. Although the raw materials of mechanism charcoal are widely sources, those who can truly produce high -quality mechanism charcoal are still wooden raw materials.

2. The charcoal machine is good

The charcoal machine is one of the key elements of high -quality mechanism charcoal. It includes crushing machines, dryers, rod machines and charcoal furnaces. The quality of these machines and equipment directly affects the quality of the finished mechanism charcoal.

3. Carbon technology learning

With good machines, good raw materials, there must be good carbonization technology. Only by using the appropriate carbonization technology to burn good charcoal because of the aptitude. It should be noted that the machines and technologies used by different charcoal raw materials are notThe same.