How to set up guard lighting of guard lighting

1. What are the guard lighting Lights

The lighting source should adopt various high -efficiency energy -saving fluorescent Lights and incandescent lamps.It should also meet the requirements of lighting places, color rendering, and anti -glare.

2. How to set guard lighting

1. The air defense basement should have normal lighting and emergency lighting at the normal and wartime lighting. Usually lighting should also have duty lighting, and transitional lighting should be set at the entrance.

2. The light -defense basement of the Pingli war should be determined according to the following requirements:

1. The illumination of normal lighting should be determined by referring to the illustration standard of similar ground building.It is necessary to adhere to work with high visual requirements for a long time, which can appropriately improve the degree of illumination standards.

2. Lantern and its layout should be coordinated with the function and building decoration;

3. lighting or emergency lighting that can be controlled alone in normal lighting should be used in normal lighting.

3. The transition illumination of the air defense basement should adopt a natural light transition. When the natural transition cannot meet the requirements, artificial lighting transitions should be used.The transitional lighting should meet the needs of people in and out of the basement in sunny, cloudy days, and night personnel.The current of each lighting single -phase branch should not exceed 16A.

4. Two AC220V10A single -phase three -hole splash -proof sockets should be provided with a cleaning room and inspection room.

5. At 1.5m from the ground near the sampling point of each filter absorber in the filtration room, 1 AC220V10A single -phase three -hole socket should be set.

6. Medical ambulance engineering, professional team members covering part, and first -class personnel covering the anti -communication duty room shall be set up in the AC380V16A three -phase and four -hole sockets, one circuit breaker, and 7 AC220V10A single -phase three -hole sockets.

7. Anti -ization communication room of the second -class personnel should be set in the AC380V16A three -phase and four -hole socket, one circuit breaker, and 5 AC220V10A single -phase three -hole sockets.

8. The anti -chemical equipment storage room should be set with 1 AC220V10A single -phase three -hole socket.

9. The selection of lamps should be selected with a lighter line Hanging or chain chandeliers and bayonet lamp heads.When the indoor net height is low or the usual needs are used to choose the ceiling light, the defense drop protection network should be added during the war.

10. The lighting of the passage, entrances, and public rooms and room lighting should be powered by different circuits.

11. The lighting power circuit from the protective area to the non -protective area. When a power circuit is shared in the protective area and the non -protective area lamps, a short -circuit protection device should be set on the inside of the protective closed door and the inside of the linked Battle.The lamps in non -protective areas are set up separately.

12. At the time of war, the main entrance and exit of the closed door to the channel lighting power supply from the ground to the ground should be supplied by the human electrical anti -power source cabinet within the protective unit. It is not advisable to use the power system power supply.