How to sharpen the branches and cuts, how to maintain the sharp gardening

1. How to grind branches and cuts sharply

The first thing to be reminded is that the new scissors have been opened, no need to grind the blade.The maintenance of branches and cutting flat is mainly for the trimming of cutting blades. For small -sized blades, you can use thin things such as diamonds (around 300 to 400) or general grinding stones (around 150).The blade is long -lasting and sharp.Please note that the auxiliary blade on the back of the small blade must also be sorted and grounded accordingly.But another arc -shaped blade surface only needs to be grinded gently.

After grinding the knife, you can use a soft thing (things that can be cut without strength) first.If you use thin cloth gauze, cotton and other things to test the effect after the blade.In order to correct it until you can cut these soft things cleanly and then, then trim the branches.

Normal scissors will only use a small blade with a 20 -degree blade with a width of 0.2 mm to 0.3 mm.After the damaged blade is re -polished, the width and angle of the small blade may change, and the sharpness will change.If this kind of grinding operation is an experienced person, you can try a few times with a small method.It is best to ask someone who knows some technology to operate.Please note that the blade is sharp, and the risk of injury needs to be avoided.

2. How to maintain Gardening

1. The problem of polishing and maintenance: Use Gardening to cut the blade often, keep sharp, and put it in a special cloth bag or toolbox to save it for next use.

2. cleaning problem: For the cleaning problem of scissors, it is mainly to remove filth.The sapped liquid attached to the shear should be cleaned in time. The cleaning agent of dirt is available on the market. You can also use hot water to clean it directly a toothbrush and other tools in hot water at about 80 C.Essence

3. To prevent rust::After cleaning the Gardening, wipe or dry the water in the Gardening artisia, and then put it away. The Gardening of the chemicals should be cleaned thoroughly to avoid corrosive metal components.Because the enemy of the steel is "rust".Although ARS's tools have been treated hard chrome -plated or specially plated on the basis of high -carbon steel, this is not all. After the erosion of resin liquid dirt water, there will still be rust.Therefore, be sure to pay attention to cleaning and maintaining full dryness in time.The heavy part of the blade is prone to residue moisture, so pay special attention.

In addition, after the scissors are dry, apply the blade anti -rust oil (mechanical oil, sewing machine oil, etc.) to apply a thin layer to keep the child's hand that is not enough to keep the child. Pay attention to avoid direct sunlight.

It is understood that a high -quality scissors can cut 500,000 to 1 million times in normal times. As long as it is properly used, it should be trimmed 500,000 times.But can it be trimmed to 1 million times or more? It really depends on the user's own habits, especially the daily maintenance and custody, so please also pay attention to itGardeningThe daily maintenance and storage of the knife.