How to use the structure and principle of electric scissors and principles of electric branches and scissors

1. What is the structure of electric scissors

Electric scissors are used as the power of the motor, and the handheld electric Tool that drives the work head through the transmission mechanism to drive the cut operation. The specific part is composed of the following parts:

1. battery: Most of the electric scissors are lithium batteries. They have large capacity and light quality. They are usually equipped with 1.5m long power cords, chargers and backpacks. The power cord cannot be cut off.There is also a battery with electric scissors on the handle, which is usually small.

2. blade: There are two types of dynamic blades and fixed blade. The quality of the blade is directly related to the pruning effect and pruning efficiency. Pay attention to the material, workmanship, and service life of the blade.

3. Body head: Not all electric scissors have a knife head. Generally, 3 cm electric cutting has a knife head, and 4 cm electric scissors have no knife head.

4. Extend rod: It can be used to trim higher branches and leaves. The length of the lengthened rod is generally 1.3-1.9 meters.

5. Others: Including lubricating oil, rubber skid cover, etc. These tools can make electric scissors more convenient and smoother.

2. What is the working principle of electric scissors

Electric scissors take electricity as the source. When working, the controller switch starts and starts with a brushless motor. Drives the eccentric axis-connecting mechanism through the reduction box, so that the knife rod is driven by the head of the knife head.Do not move on the blade to complete the pruning of the branches.

3. How to use electric branches and scissors

Electric pruning trimming is used for cutting and trimming and trimming, and trimming, picking, etc. of fruit branches below 30mm. The use of simple and convenient use, good pruning quality, and the use of electric pruning trimming is:

1. Open the special Backpack and put the electric pruning and battery in the corresponding storage package.

2. Put the electric branches and pruning and connect the power supply through the Backpack and connect to the battery, and wear a Backpack (put the scissors power cord into the specified fixed buckle of the strap to prevent it from cutting to the wire)

3. Take out the electric branches and trimming, turn on the battery power switch, and will make a "drop" sound, which represents the normal power supply of the battery.

4. Continuously and quickly deduct the trigger 2 to 3 times, and the blade will be opened automatically.

5. Before work, pull the trigger to make the blade aircraft run several times. Listen to whether there is no sound or too fast and too slow, and start working after normal.

6. The opening size of the blade: Press the trigger, and when you hear the two "Didi" sounds, the trigger will be released immediately, and the size of the blade will automatically convert.

7. After the trim is trimmed, long press the trigger, hear the three sounds of "Didi", release the trigger, automatically close the blade, and then turn off the battery power switch to collect it.

Note: During the long -term use of the machine, the grip heat is normal; the blade of the scissors needs to be maintained regularly. When the branches are completed or needed to replace the blade, the blade is opened to add lubricating oil between the blade.