[Keep warm life jacket] What is the method and precautions of warm life jacket for warm life jacket

[Keep warm life jacket] What is the method and precautions of warm life jacket for warm life jacket

Insulation -Introduction

Insulation clothes, that is, IMMMMERSION suit, also known as life service, heating water -soaked heating suit, insulation life service, navigation and navigation life service.

Type I life service

It meets the requirements of the SOLAS Convention and the IMO specifications, with dense water, buoyancy and natural insulation functions. It is equipped with whistle and life jacket lamps.It connects clothes and pants to protect the entire body except the face, and it is suitable for various sailing ships, petroleum platforms and other marine operations.The product is recognized and tested by the Chinese Class -grade agency (or other relevant qualification units such as carriers in other countries).

II -type life service

Requirements that meet the requirements of imo LSA and MSC81.Armat which has a heat -watering heating suit with buoyancy and no need to wear life jackets.Equipped with whistle and life jacket lamps.The fabric is made of high -quality neoprene composite material.It has waterproofing, insulation, temperature resistance, flame retardant, oil resistance, and stipulated strength. It is a multi -layer composite, non -toxic, non -irritating odor, and will not be due to sea air, seawater, fresh water, oil and fungi.Affect use.This product is recognized and tested by Chinese carriers.

Insulation -material performance

Fabric: nylon waterproof cloth chlorite rubber CR composite material second -generation product fabric is: 5mm club rubber foam rubber (5mmcr).

Insulation and buoyancy material: polyethylene foam chlorherye rubber CR composite material

Dressing time:

& lt; 2min

storage temperature:

-30 -65

Specification size:

XL type: suitable for those who are more than 1.85m height.

Type L: Suitable for 1.75m-1.85m height.

Type M: Suitable for those who are less than 1.75m.

waterproof performance:

The wearer floated in the water for 1 hour, and the amount of water in the clothes was less than 200g.

Insulation characteristics:

Wearers soak for 6 hours in a static water flow at 0-2 C, and the body temperature decreases does not exceed 2 C.

Buoyancy performance:

The wearer can turn to the upward position of the face within 5 seconds. The water surface is 120mm exposed in the mouth and nose, soaked in the water for 24 hours, and its buoyancy loss is less than 5 C.

Insulation -Dressed in the insulation service essentials

1. Take out the insulation suit and open it.

2As well asPut on the insulation.

3As well asKneel down and pull your leg zipper.

4As well asPull the waterproof zipper on the chest to the face.

5As well asPull the edge of the face to the bottom of the chin before the water.

6As well asThe insulation clothing should be worn along with the recognized life jacket.

7As well asTake out the gloves from the Sleeve pocket.

8As well asPut on gloves and pull up the zipper.

Insulation -the main points of the insulation utensils

1As well asTake out the insulation appliance and open it.

2As well asAfter putting the use of the utensils from the top, pull it to the face, and pull it to the face

3As well asTighten the insulation Tool on the face.

Insulation -maintenance and precautions

1As well asThis product is stored in a low -temperature, ventilation, and dry environment, and it is strictly prohibited to place in high temperature environment or long -term exposure; avoid contact with corrosive chemical preparations such as acid -alkali salt; strictly prohibited pressure;Essence

2As well asDuring the storage and application process, you should avoid contacting or friction with the sharp objects to prevent the waterproof effect from being stab or grinds the waterproof layer; pay attention to mouse harm.

3As well asAfter application, turn out the inner layer of the clothing in time, place it in a dry and ventilated place, and the drying accumulation exists in the internal water; if you need to clean it, use a neutral detergent and soft brush.

4As well asDuring the preservation process, you should not turn on the life clothes light switch, and you can only turn on when needed, otherwise it will damage the life of the life jacket or consume the power of the lithium battery.

5As well asCheck the clothing regularly. If damage and leakage are found, it should be repaired in time.