Special Mic Precautions for high -rod light installation construction plan road high pole light installation precautions
1. What are the lamps of high rod lamps
High rod lamps generally refer to a new type of lighting device composed of steel tapered light rods and high -power combined light racks above 15 meters. It consists of lamp head, internal lamp electrical, rod body and basic part.Mi is suitable for the use of urban squares, stations, docks, cargo farms, highways, stadiums, overpass and other places.
Second, high rod light installation construction plan
1. Organization of basic buried parts
Clear the garbage and miscellaneous objects on the basic surface of the concrete, remove the protective objects wrapped on the embedded object bolts, review the spacing size (including diagonal sizes) between each bolt, and confirm that the size of the bolt position is consistent with the icon size. The nut can be freely free.Twisted.
2. Package of the rod body
Before starting, a fine steel wire or iron wire with a high length should be penetrated into the rod body from the electrical door. It is used to guide the wire rope and cable in the future.
3. Wear steel rope and cable
After the rod body socket is completed, connect the cable connector with the main steel wire rope of the rolling machine, and then fix it with the guidance iron wire reserved in the pole body in the electrical door, loosen the rolling machine, so that the main steel wire rope is released from the rolling cylinder.At the same time, the tensor is tilted to guide the wire at the other end of the rod body, pulling the ride connector out of the small ends of the rod body, so that the riggle connector will be retracted and entering the rod body.
4. Head installation
The front end of the pole body that has been completed and penetrated by the wire rope and cable is matched with objects (the electrical door of the pole body is up).Cover, lightning rod and connect to the connection line.
5. Hanging
According to their respective situations of 35 meters, 15 meters, and 8 -meter steel rods, they choose cranes and cranes.During the lifting process, the person in charge was commanded uniformly to ensure that the whole process of the light rod Hanging was safely and orderly.
6. installation and debugging of the lamplet
Twist the bolt on the nut of the lamp plate Sleeve, hang up the lamp plate with a crane, and put it in the front end of the light rod.Turn the bolt tightly in turn, and adjust the bolt into the depth, so that the lantern Sleeve sleeve and the surrounding space of the rod body are basically consistent.
Install the lamps at the predetermined position of the lamp plate, wiring, and send the power supply, and perform a 24 -hour test.
3. precautions for the installation of road high rod Lights
1. During installation, high -rod Lights should be used reasonably to ensure that the distribution of the light on the ground is evenly distributed. At the same time, according to the width of the road, the light control control of the past vehicles and pedestrian conditions must be performed.
2. When installing, install a suitable length of each stitching.During the installation process, it is easy to cause a certain error. In order to be convenient and fast, it is necessary to apply suitable forces at both ends to obtain a close socket.
3. The installation of high rod Lights should pay attention to the reasonable light, and choose a relatively high -quality product in performance.
4. After the installation of high rod Lights is completed, it is necessary to check it to test whether the power supply can work normally, whether the screw installation is in place, and whether there is a loose.
In general, high rod Lights are large lamps. The first thing to ensure is its safety performance. Therefore, installing high rod street lights must not be sloppy to avoid safety accidents.
Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;