The characteristics of anticorrosive wooden flower stand are the purpose of anticorrosive wooden flower stand

1. The characteristics of anticorrosive wooden Flower stand

1. Anticorrosive wooden Flower stand is a shed Flower stand that is specially used for Hanging flowers and plants. It is made of special corrupt wood. It has a variety of characteristics such as natural, environmental protection, and moisture.Rural style.

2. The anticorrosive wood Flower rack has a strong ability to prevent the moth, which can fully dissolve the killing of fungi and viruses. The anticorrosive wood is a type of corrupted wood. It contains a lot of solubitives in itself, which can effectively prevent the bites of the worm.

3. The anticorrosive wooden Flower rack has the characteristics of moisture -proof. It will not rot if it is moisture like other wood, and the durability is particularly strong.

4. In the anticorrosive wooden Flower stand, contains a lot of discoloration factors, so it will not cause harm to the wooden appearance tissue. Under suitable conditions, part of the discoloration factor will generate many cellulose, which can form a protective layer on the outer surface to form a protective layer.For internal wood, it plays a good protective role.

2. The purpose of anticorrosive wooden Flower stand

1. The most important purpose of anticorrosive wooden Flower stand can grow beautiful flowers around the Flower stand, or some Teng Man's plants, which helps the plants grow along the Flower stand.To a better growth environment, it can also play a certain decorative role.

2. The anticorrosive wooden Flower stand is very beautiful. After exquisite design, you can not only decorate the room, but also put it in the yard. As a shaded rest, it is a natural percux, which can be used for users to rest and appreciate the scenery.

3. Anticorrosive wooden Flower stand can be used for family decoration, creating a natural decoration environment of the countryside. It can also be used in the Park, which can beautify the natural environment and create a rest place for passers -by.In the garden plant training base, it creates a natural environment for the growth of flowers and plants.

3. How to install anticorrosive wooden Flower stand

With the development of bionic technology, the bionic invention of anticorrosive wooden Flower stand has gradually been applied to life.Therefore, the anticorrosive wood designers pay attention to the imitation results, and also pay attention to the laws of natural changes.But how to install anti -corrosion wooden flower stands to be stronger?

1. Method paving method:Use stainless steel cross screws to connect to the keel on the front of the anticorrosive wooden Flower stand; fix the keel on the opposite side of the Flower stand with screws, and make a few compositions into a whole. It will not destroy the ground structure, but also freely disassemble and clean it.

2. Fixed laying method:Fix the keel on the ground with expansion screws, and the expansion filaments are made of nylon (better anti -aging).

3. Suspension laying method:The keel can be connected to a frame or a well -character frame structure on the ground, and then laid the Flower stand.

The specific measures are as follows:

1. Treatment of the grassroots level of the wooden structure: During the design and construction, the air circulation between the anticorrosive wood and the ground should be fully maintained.

2. When making and installing anticorrosive wooden flower frames, 0.2-1cm gap between anticorrosive wood should be left (then determine the gap size according to the moisture content of the wood, and the water content of the wood should not exceed 0.8cm.The expansion of water and anticorrosive wood.

3. Fang columns with a thickness of more than 50mm or more than 90mm are opened in the center of the back of the back.

4. Hardware to avoid rust corrosion in the future and apply stainless steel, hot -dip galvanized or copper materials.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

5. Use the existing size and shape as much as possible. The damaged part should be painted with preservatives and Outdoor protective coatings. Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laid.Light again, if you want to have a better effect, you can paint Outdoor protection coatings after cleaning the surface.In the case of a rainy day, it is best to cover it with plastic cloth first, and then brush out the Outdoor protection coatings after the sun is clear. It should be avoided within 24 hours after painting.

6. Surface user external protective coatings or oil -based coatings are applied (only once). In order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective film that has been formed by the anticorrosive wood layer.EssenceIf you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.