[Wall installation] How to install the wall cabinet cabinet installation method and precautions correctly

Wall cabinet installation method

1. Determine the installation location of the Wall cabinet

Hanging wall cabinets are generally connected to the wall with two screws. Therefore, you need to determine the location of the screw.The position needs to be determined according to the installation height and the position of the nail hole of the cabinet.The tools that need to be used when the installation position is mainly tapetage and color pen.

2. Use impact drilling perforation

After determining the drilling position, you need to use impact drilling.The shock drill is connected to the power supply and a deeper installation hole is made in the marked position.Pay attention to it, there will be no water pipes and electric pipes before drilling.

3. Use the hand hammer to load the glue particles

Before connecting the screws, you need to install the glue particles in the screw hole. The glue can better fix the screws.Use your hand hammer to knock the rubber particles into the drilling hole.

4. Install the screw connection cabinet and wall surface

After installing the glue, connect the screw parts to the cabinet and wall.Then the installed master then replaced the drill with a shock drill and nailed the screw into the wall.

5. assembly and handle

After the cabinet is fixed to the wall, the cabinet is left to pull the hand.The handle installation is relatively simple. Use the screwdriver to fix the handle and screw piece in a fixed position.

precautions for Wall cabinet installation

What we should pay attention to when we install the Wall cabinet is to be careful not to destroy the wall when installing.To keep the indoor air circulation, the cabinet body is dry and extend the service life.Avoid water, you should use the cloth to dry it in time if there are water droplets.Do not contact the cabinet with the ground during installation. soft objects should be matched to avoid bumps.Pay attention to the surface of metal objects such as screwdrivers and other short -distance plates.

12. Inspection before installation, discover abnormalities, and feedback for the first time in order to change it in time.

2Carefully check the identification of the drawing and the occlusal state of the scene to determine the installation order.

3Pay attention to the protection of product components during the installation process.

4, Beam position, top line, and closing plate cut corner corners should be checked carefully to cut accurate cutting.

5,Notice2Try not to place the layer of the plate side plate on the side of the cabinet2Inside the cabinet.

6If the diagonal cabinet of the tape is used is equal, the phenomenon of uneven layer should be placed with a planer to nail the back plate.

7If the customer should ask questions during installation, answer it in time, and inform the reasonableness of the processing method.

8If there is a problem with the installation, the installation workers must fill in the installation notes and change the re -order to do a good job of tracking services.

9After the installation, it must be self -inspection and adjustment, and then the customer is accepted and the signature is confirmed.

10After the entire installation service process is completed, the customer must be repaid a clean environment.