How to put on a normal Tent

1. First choose the camp. After considering the wind direction and terrain, choose a flat land and lay the inner account of the Tent on the ground (usually the inner account, but there are also some to support the external account firstThe principle is the layer of the Tent), and the nail Bags, poles and other accessories wrapped with tents are put aside first.

2. Take out the folding Tent pole, turn it over, straighten each section, and connect into a long pole.

3. Put the long fiber rod into the barracks (also known as the pipe) of the Tent.There are a few rods to be worn at the same time.

4. Insert one of the fiber rod into the corporate cave or on the bottom of the Tent (some tents are used with a needle ring, each has its own benefits), and then to the other end (the corner), hold the rod in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent in one hand, hold the Tent with one hand, hold the Tent with one hand, hold the Tent in one hand, hold the Tent with one hand, and hold the Tent in one hand.The bottom angle, slowly arched the rod, supported the Tent, and then inserted the rod into the corporate eyes or needle ring.

5. In the end, it is a foreign account, open the foreign account, and the internal account.

6. There are some ropes on the external account, which is used to strengthen the Tent. It can generally not be pulled without any wind. It is best to pull it up. It also uses the nails. Several ropes are pulled evenly.

Different types of Tent construction methods

1. Triangular Tent

(1) Put the Tent in the ground, flatten the ground and nail the ground along the bottom.

(2) Smash the two branches from the Tent, put it on the isolation Tube, and then put it into the crossbar.

(3) The Tent coat is covered and the pull of the jacket is stretched to stretch all the outside.

(4) Way the rainproof hood into the support of the rod, put it on the wind resistance line, and complete.

Note: There is a space between the inner and outer Tent of the triangular double Tent. This space should be maintained. Do not make the inner and outer layers "stick" together. This space can prevent rain and warmth.

2. Ding -shaped Tent

(1) Put the Tent to the ground, nail the four corners (some are hexagonal) ground nails.

(2) The two groups (the hexagonal dome is three groups) of the Pepper rods. If the rod is a loose part, you need to connect it according to the instructions group.

(3) Put the puff rod into the custard of the Tent, and insert one end of the two groups into the pores. The other end of the two sets of rods is stretched hard at the same time.

(4) Speaking of tents shaking and forming can be placed on the ground.A jacket or a small rain cover with a jacket is completed.

Tips for building tents

1. Try to set up tents on a hard and flat ground, and do not camp on the river bank and dry river bed.

2. The Tent is selected in the sandy land, grassland, or rocky land.

3. At least there must be grooves. Do not take it next to the streams and rivers. It will not be too cold at night.

4. The Tent surface is best to see the early morning sunshine from south or southeast. Try not to be on the ridge or mountain top.

5. The number of tents is counted before the Tent was built.

5. In order to prevent insects from entering, a circle of kerosene can be sprinkled around the Tent.

What are the precautions for taking a Tent?

1. The entrance of the Tent should be carried on the wind, and the Tent should stay away from the hillside with rolling stones.

2. To avoid the Tent flooded when it rains, a drainage ditch should be dug directly below the top of the Tent.

3. Press the four corners of the Tent.Keep air circulation in the Tent, and cook in the Tent to prevent fire.

4. Before going to bed in the evening, check whether all the flames are extinguished, and whether the Tent is fixed and strong.

5. The Tent should be built in order: First build a public Tent.First set up a cooking Tent at the downwind of the camp, build a stove, boil a pot of water, and then build a warehouse Tent and their respective Camping tents to store public equipment in order.When the Tent of the entire camp is built, the boiled water has been opened, and you can drink and start cooking immediately.

6. Build a wild toilet: Choose a little lower at the downwind of the camp and stay away from the river (at least 20 meters).It is best to dig a rectangular pit with a width of about 30 cm, about 50 cm long, and about half a meter deep, and put some stone and fir leaves.Surround plastic cloth or packaging box on three sides, fix it, and the opening side should be back.Prepare some sandy soils and a handle of iron and a cardboard.After the stool, use some sand to bury the excrement and sanitary paper, and cover the pits with a board to eliminate the odor.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Tags: outdoor products, outdoor shoes and clothing-equipment, Tent, tourist attractions landscape

Add new comments