What is the length of several types of ski panels in skiing boards?
one,SkiletWhat is
Skiboard is a skiing equipment, which invented Nordic in the early 20th century to increase the speed of skiing during skiing.The structure of the Ski panel consists of a base, arched head, contact, edge, effective edges and bending points.Skiboards are mainly divided into two types: skiing veneer and Ski double board. With the continuous progress of technology, skiing boards have been differentiated into many different types.
2. There are several types of skiing boards
1. All Mountain Skis
This is the most common type. Most of the snow friends use this type. The all-round board can actually be classified as this column, with the waist width of 68-75.This type of board is generally reduced by 15 cm to 5cm.If you choose, look at the level and skiing habits.Beginners recommend that they choose short, good control, and good technology improvement.Senior skiers actually prefer to enjoy the fun brought by speed, so that the board must be relatively long.In addition, people with heavy weight should choose a little longer.
Just like its name, the goal of this Skiboard aim is to glide in any region.Its shape is very close to the Carving skiing, so it is still suitable for taxi on the compact snow surface.It is different from the Carving skilets in its waist width. Most of them are between 75 and 90 mm, which can give you more buoyancy in the snowy snow.There are many global skiing boards, all kinds of shapes and hardness, some like traditional traditions with Ski panels, while others look more like free -style skiing boards.
2. Carving Skis (Carving Skis)
Carving skiing board is the most used Skiboard for most casual Ski people.It is very suitable to glide on the compact snow trail and there will be a lot of fun.Generally speaking, the waist of the snowboard (the position under the foot of the Ski) is about 70 to 80 mm width, and the width of the head and tails exceeds 110 mm.This shape allows the Skiboard to slip along the edge of its edge.
3. Free -style Ski board
Free -style skiboards are very similar to wild snowboards, but they are not so wide.Its design goals are mainly targeted at gliding outside the snow road, but it can also slip well in the snow channel.It is slightly wider than skiing plates across the region, and its waist is generally between 80 and 100 mm.The mainstream free -scale Ski board will have some Rocker, and the board head and the tail of the plate are slightly raised from the side.This design helps skiing to float on various snow surfaces, and can easily change the direction of gliding. At the same time, it can also provide sufficient grip on the compact snow surface.
4. Wild Snow board (Powder Skis)
Wild snowboards are generally between 88-120.(Some people say that the waist width of the wild snowboards generally from 90 mm to 140 mm, and the length is generally 170 cm to 200 cm.) As mentioned above, wild snow buoyancy is the key.Choosing a wild snowboard is generally as tall as height, and such as those with a width of 110 or more, it is difficult for you to find boards below 176cm.You sink in the 5 -meter -deep wild snow, but it is difficult to get up.
Compared to the snow trail, the wild snowboard has a wider and longer body, but the snowboard elasticity is softer.The larger length and width can provide sufficient buoyancy in the deep and soft snow.Some wild snowboards have designs called Rocker or head and tails. Compared with ordinary snowboards, the wild snowboards start to rise up in the head and tail., To provide more control capabilities.There are also some wild snowboards that have the waistline that are opposite to ordinary snowboards, that is, the width of the head and the tail of the plate is narrower than the waist waist. This design is still to improve the buoyancy and handling in the powder snow.
5. Big Mountain Skis
The waist width of the high mountains and wild snowboards is usually between 90 and 130 mm. It is harder and longer than ordinary skilets.Takayama Wild Snowboards are usually 180 to 210 cm long. This snowboard is the favorite of extreme Ski people.
This kind of skiing plate is generally divided into large turns and small rotation.The level of skiers who can control the competitive board should be very high.Large turning boards are generally choosing a length of similar to their height, and small backboards generally choose the length of 15cm.But if you pursue speed, choose a little longer, so that the stability is higher.
Compared to the above -mentioned snowboards, the small competitive schola plates look very short. The length of the snowboard used by the fastest competitors in the world today is about 160 cm (but these people will not consider any shorter than 205 cm in previous years.To.The small turn board is dexterous and reactive. It can turn on the solid snow surface at an incredible speed, but this kind of board is not a good choice for the unsuccessful snow trail and deep snow.
The large back Ski board has a longer waist radius than the small backplane, and it is harder, so its turn radius is longer.It is also used to glide at high speed on a solid snowway, usually more length than the small turn board to enhance stability and grip.
8. Fancy skiing board (two-ends of skiing boards, TWIN-TIP Skis)
The two -ends are the favorite of those who like to challenge the semi -Tube snow trails and venue parks, and are also called Freestyle Skis.This kind of Ski board is very soft, and the tail is raised, and it can provide better tolerance when jumping up.Please try it before choosing a fancy board.At the same length, fancy boards can slide like the entire area plate. If the performance allows, a slightly shorter fancy board is also possible.
9. Cross Country Skis
The main difference between off -road board and all Alpine Skis mentioned above is that it is not only designed to slide from the landscape, it is very light and easy to wear in a vast area.Its fixed device allows the skiers to lift the heels of the Ski, walking as usual.Compared to other snowboards, in order to provide grip in the process of moving forward, its bottom bottom has texture.The usual skiing boards need to be waxed and choose different types of wax according to different snow quality, while it does not need to be waxed and easy to use.
10. Competitive off -road Ski board (Cross Country Racing Skis)
Competitive off -road boards are used to move quickly on compact Ski trails. It is very narrow and is not suitable for snowfills that are not opened on the road.There are two types of competitive off -road boards, one is a straight slip, and the other is the traditional pedal ice type.Because it is necessary to judge which type of snowboard is more suitable for yourself according to the Ski style, its own weight, and the local snow quality, only you can choose the Ski board through the above factors.
11. Touring Skis (Touring Skis)
This is a Ski board used by the Alpine Touring activity. This Ski board has a variety of width and style.The wider model, especially the type of metal edge, can travel through or engaged in Ski Camping activities in rugged terrain.The narrow and lighter model is generally used to travel on a gentle terrain or compact snow.Many people now use free Ski panels to replace the climbing board, which can adapt to more snow quality.Backcountry skiers usually need a pair of stop skating bands to the bottom of the snowboard to help climb.
three,SkiletWhat is the length
When choosing the length of the skiing board, the maximum is limited to the height of the wrist that does not exceed my arm, and the shortest should not be shorter than the crotch.Choose a long relief snowboard to use fast, good stability, short Ski board speed, slow fibrillation, poor stability.
For beginners, too long skiing boards are not easy to control, and it is difficult to turn it. It is not conducive to improving their technical level. Beginners are best to add about 5 cm with their height.Beginners should also choose skiing boards with large elasticity.Because this kind of Skiboard is not easy to bump when it encounters uneven snow surface, the braking effect is better, and it is easier to operate.