What is the reason for the working principle of the bicycle code watch?
1. The working principle of the Bicycle code watch
The principle of the bicycle sheet is that the sensor captures the information brought by the inductive magnet when the car ring rotates, transmits it to the gauge through the sensing line, and the host code table is calculated to calculate the speed, mileage and other information after this process.
Popularly speaking, there is a magnet -like thing on the front wheels. There is a sensor on the front fork. The wheels turn around, and the magnet passes through the sensor once.In the wheel parameters, the code watch has calculated the speed and the journey.To put it simply, the airflow formed during the cycling process to generate induction of the wind hole of the code watch, thereby measuring the speed.
2. What is the reason for the Bicycle code watch
The bicycle codes are not allowed
1. The code table generally has only two keys. The "SET key" in the back is the setting key.Hold down the "SET key" behind the code watch for more than 2 seconds, and enter the setting mode after the screen displays "Set Open".
2. The screen displays "SIZE 2155", where the wheel value is set.Press "Big Key", the screen display "Unit Kmh", that is, the display value is "km/h".
3. Press "Big Key", the screen shows "Dist 0", which is the total mileage.Press "Big Key", the screen displays "time 00:02", that is, time.
4. Press "Big Key", the screen display "Scan OFF", that is, the scroll display mode is turned off.
5. Then go back to the "Time" interface, press the "SET key", the numbers flickered, and set the numbers according to the "Big Key".
6. After the time is adjusted, press the "SET key" again, the screen display "Set OK", and the time settings are successful.
7. Press the "SET key" behind the code watch for more than 2 seconds. The screen displays "SET Close", exit the setting mode, and then press "Big Key" to switch to time and check the setting time.
The average speed of the bicycle codes is not allowed
The biggest reason for the inaccurate speed of the bicycle codes is the incorrect setting of the perimeter of the wheels. Generally, the newly -bought bicycle sheet wheels need to be set. You need to accurately measure the size of the car, and then the code watch parameters follow the car circle according to the car circle.Settings.
The highest speed of the Bicycle code watch is not allowed
There are many reasons for the highest speed of the Bicycle code watch, but the reason is basically the same, that is, the wheels of the wheels have vibrated when the magnets of the front wheels pass through the sensor (sanitary Tube) through the code watch, such as overwhelming over the wheel, such as overwriting too much.A pit, a sudden brake, etc., made the magnet shake near the sensor of the code watch, so that the code watch thought that in this shaking time, the front wheels had turned around, so that there would be a very high high.Speed and recorded, this is normal, don't care.