What is the structure of the water drop wheel?

1. What is the structure of the water drop wheel

The original intention of the water drop wheel is used for long -range and its bait, which uses the principle of horizontal winding, and can rotate the wire shaft.The line shaft is used to activate the line through the rocker to activate the line through the brakes.The structure of the water drop wheel is as follows:

1. Put the line switch(Spool Release Button): Press it to qualify, shake the handle and reset.

2. Line cup(SPOOL): Line cups are not only important for the storage line, but also for the smoothness of the throwing distance.Generally, the line cup is made of aluminum alloy. The high -end line cup is made of aluminum, and the conventional wire cup is made of die casting aluminum.

3. brake(Brake): Adjust the initial speed of the wire cup and the initial flight speed of the line set, control the deceleration rate of the line cup.

4, wheel seat(Reel Foot): Fixed part of the fishing rod.

5. Ceramic outlet(LINE Guide): Move with the line shaft to ensure that the upper and down shafts are guided without a large angle.

6. Rocked arms grip(Reel Handle): There are two types of left rocker and right rocker. The water Drop wheels cannot be swapped like a spinning wheel, so the most suitable rocker arm needs to be determined.Using the right rocker with the right hand, the fishing wheel is on your left side, shake the handle with the right hand.

7. Star -type unloading force wrench(DRAG): Adjust the outline of the circuit.Generally, the regulation of the unloading force is 80 %, and it is urgently adjusted according to the situation when it needs to be adjusted.

8. Filter the knob(Spool Tensioner KNOB): The adjustment of the mechanical brake power, the tighter the tighter cup, the slower, and the faster.

9. The fuselage framework(Body Frame): It is made of aluminum alloy or carbon fiber, and the carbon fiber framework is light. It is recommended to find an integrated framework made of the same material. High -end fishing ships are usually made of integrated aluminum alloy framework.

Second, the disassembly and assembly tutorial of the water drop wheel

1. Preparation tools.Prepare the tools, such as screwdriver, wrench, tweezers, etc.

2. Disassemble external components.Use a screwdriver to unscrew the fixed screws outside the water drop wheel, remove the side cap and the wire cup, and pay attention to keep the screwdriver vertically vertically to avoid damaging the screws. For tight screws, do not use brute force.The strength was loose until the screw was loose.

3. Disassemble internal components.Press the end of the dealer or fingers to hold one end of the deck, and pinch the deck with the other end with a pointed tweezer. When removing the gear shaft, you need to pay attention to the pads on the axis, large metal teeth, friction pieces, rebound tooth sheets and other parts.It may need to be disassembled with a specific Tool, such as the top poles of the shaft, and each component is placed in order when disassembling to avoid errors when loading.

4. clean and repair.During the disassembly process, you can clean and repair the interior of the drop wheel, such as replacing the sealing ring or repairing damaged components.

5. Re -assemble.After the disassembly is completed, put all components in order. Do not miss any small components and small cushions. During the return process, pay special attention to the direction and order.

6. Check and test.After completing the assembly, check whether the drops of water drops work normally to ensure that there is no leakage or other problems.