What to do if the swimming mirror is fog and foggy and precautions for swimming mirrors

What to do if the swimming mirror is foggy

1. The most direct way is to buy anti -fog agents, rub the swimming moster, and then rinse with water.

2. Wash with a small amount of babies (tear -free formula) to wipe the swimming mirror, and then wash it with water;

3. There are also many friends who licked it directly with their tongues, which can also achieve a certain effect;

4. You can also use detergent, shower gel, shampoo drip into the frame. After applying it evenly, wash it with water (clean water will stimulate your eyes).

Factors affecting the effect of anti -fog

1. External factors

(1) Poor water quality is not good and has oil quality.

(2) Disinction water or too much chlorine pool.

(3) The high temperature exceeds 75 degrees Celsius.

(4) Direct light of ultraviolet rays.

(5) Chemical agent erosion.

(6) The mirror surface is scratched.

2. Personal constitution is easy to fog

(1) Those with a large amount of sweats can easily cause oil dirt.

(1) Oily Skin, with a large amount of oil on the face.

(1) Those with long eyelashes and brushing the lens.

3. Use habits

(1) After use, it is not rinsed with water, causing the internal oil to cover the anti -fog surface.

(2) Bring into the three -warm (sauna) oven, soak at high temperature or various medicinal baths such as chemicals to make the anti -fog fail.

(3) Directly exposed to the sun, and the ultraviolet destruction of anti -fog chemical effects.

(4) Place the car instrument board and set the object box (high temperature).

(5) Wipe the mirror in an incorrect way (wipe dry with a wipe or gently scrape the mirror).

4. swimming moster style

(1) The swimmingoscope space is small. When the amount of sweats is large, there is fog in the air; for example: the space in the bathroom is small, and the temperature and humidity are high, and the whole bathroom is fog.

(2) Wearing for more than 20-30 minutes for a long time, you must remove the fresh air to replace it, otherwise there will be fog.

How to maintain or restore the effect of anti -fog effect

1. The anti -fog function is hydrophilicity. Please soak it with water before use and then wear it. The anti -fog effect is better.

2. During the process of wearing, cleaning or use, avoid contact with nails or fingers and the internal anti -fog surface of the mirror to prevent the lens from scratching and destroying the anti -fog effect.

3. After each swimming, rinse it with water to prevent the oil stain from drying and block the anti -fog effect.

4. After each swimming, due to personal sweat and oil in the pool water, it will be attached to the mirror, which will affect the anti -fog function of the mirror surface.At this time, you can use a neutral cleaning agent to gently rub the foam with your fingers, and then use your fingers to use a little foam to gently wipe the swimming mirrors and wash the oil inside the goggles (note: before wipe with the foam, soak the lens first;When you wipe it with your fingers, avoid the fingernail scratching the anti -fog film.); Then rinse with water, you can remove the oil and restore the anti -fog effect.

5. Because the anti -fog in the Swimming goggles will be used for a long time and washed, the anti -fog effect in the Swimming goggles will be reduced. If the above methods are still not effective, the anti -fog agent can be used to enhance the anti -fog effect; alsoYou can apply it to the swimming mirror surface (no need to rinse with water), but these methods can only be briefly fogged and cannot maintain the anti -fog function for a long time.Whether there is oil on the mirror, and clean it according to the normal neutral cleaner foam.

How to extend the performance life of swimming mirror prevention and fog

1. The ultraviolet rays of the sun will destroy the anti -fog performance of the Swimming goggles. Try to avoid placing the swimming moster in the sun.

2. The anti -fog performance of general swimming moster will fail at 80 degrees Celsius.Therefore, you should avoid letting the Swimming goggles contact the thermal source, and avoid placing the Swimming goggles in the storage box irradiated by the sun.

3. The anti -fog performance of the standard swimming moster can be maintained for more than 100 hours. If the mirror surface is found when it is just used, most of the reasons are that the user swims in the unclean or oil -quality water, so that the lens anti -fog surface is attached to a one.Layer oil dirt is blocked by the anti -fog effect. At this time, as long as the oil dirt on the lens with a neutralized lens is used to restore the anti -fog performance of the goggles.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;