Potted flowers Six methods

1. The residual tea is used to pour the flowers, which can keep the soil water and add nitrogen and other nutrients to the plants.However, the humidity of the flower basin should be poured in a regular basis without pouring it with the dumping tea.

2. After the deterioration milk is poured with milk, add water to pour the flowers, which is beneficial to the growth of flowers.But more water is used to make it easier to dilute.Unblocked milk should not be poured flowers, because it generates a lot of calories during fermentation, it will "burn" the root (rotten roots).

3. Pour the flowers with cold water and pour the flowers with cold water, which can make flowers and trees flowing flowers and flowers, and can promote early flowering.If it is used to pour the bamboo, it can make its branches and leaves develop horizontally, and the dwarf is dense.

4. Pour the flowers in warm water in winter and cold water. It is advisable to pour flowers with warm water.It is best to place the water in the room, and then pour it when it is similar to the temperature of the room.It is better if the water temperature can be poured when the water temperature is 35 C.

5. Put the flowers in rice water often use rice water to pour rice orlan and other flowers, which can make their branches lush and bright.

6. When there is no one in the family, people who love flowers and flowers and flowers are not at home for ten days and a half months for visiting relatives or going out. No one is poured.At this time, a plastic bag can be filled with water, pierced a small hole with a needle on the bottom of the bag, placed in a Flower pot, and the small holes are stuck to the soil, and the water will slowly leak out the wet soil.The size of the hole should be mastered so as to avoid water leakage too fast.Or put a ware full of cold water next to the Flower pot, find a wide cloth strip with better water absorption, put one end in the water water, and the other end into the Flower pot soil.Wet, the flowers do not die.

Five methods for fertilizing Potted flowers

1. Sprinkle a layer of Wheat rice granules in the Flower pot, which can promote the growth of flowers and extend the flowering period.

2. Burning eggshell Fertilizer is crushed into the Flower pot. It is a good Fertilizer, which can make the pots grow lush and the leaves are gorgeous.

3. Cooked a small amount of soybeans to be used.Wear three points for each pot of flowers and put 3-5 cooked soybeans, depth and 2-3 cm, without hurting the root of the flower, and covering the soil as usual.

4. Broke the pork bones, fish bones, etc. prepared for abandoned, and apply the bottom or basin surface of the pot.

5. Pour flowers with rice washing water.Trace elements such as nitrogen, phosphorus, and potassium in rice washing are mild Fertilizers and mild Fertilizers. It does not hurt the root of the flower.

How to prevent and control the Potted flowers

Termites and ants are very harmful to pot flowers. It is not only dry, but also destroys the root system of the plants, causing the plant to weaken the ability to absorb and transmit the plant in nutrition, water, and eventually leads to the poor potential, withered and even death of the plant.Now introduce several methods for preventing ant -harm.

Eliminate

Pen flower should be far away from the ant hole.If you find that there are ants in the pot soil, first follow the ant's crawling route to find the ant nest, and use water flooding, fire burning, spraying drugs and other methods to eliminate it.Sprinkle some lime on the crawling route of ant nests and ants to prevent the ant from harm again.

Physical control

1. When applying rotten Fertilizer to apply base Fertilizer or Organic fertilizer, it is necessary to use the Organic fertilizer that is fully fermented and rotten. Do not use raw or semi -cooked Fertilizer to avoid causing ants for ants.

2. Washing the excreta of insects such as flies, moths, aphids, mites and other insects on the leaves of the leaf surface can easily seduce ants to find food. Therefore, it is necessary to spray the leaves with water to keep it clean.At the same time, clean the ground and keep the pots of Potted flowers clean and hygienic, so as not to attract ants with odor.

3. Put the potted pots that are harmed by ants, and slowly put them in a barrel with water (the water can be flooded through the pot soil) for 30 to 60 minutes.The ants can't stand the flooding of the water, and they will crawl out of the pot soil. At this time, the ants that float on the water and crawl on the pot of the pot of the pot can be removed.

4. The garlic is peeled with garlic and smashed. These debris are buried into the pot soil.

5. The most effective way to remove the pots that have built nests at the root is to turn the pot in the pool and destroy all the ants.Then clean the roots of the plant and plant pot flowers with new pots of sterilization.

Chemical prevention

1. Before the potting of potting soil, before the upper or over the basin, the pot soil is disinfected with 40%Forma, 65%Daisen zinc powder, and 50%multi -bacterial pink powder, etc., killing the termite in the pot soil, and the termites in the pot soilAnt and its eggs.

2. Burted the soil with 50%of the enemy's wettable powder and the fine soil with 50 sieves and mix well to make the medicine soil, and then bury the medicine soil into the pot soil to eliminate the ants.

3. Plutiny solution should not be turned over the basin, the effect of buried soil is not obvious and severely damaged, or the ants that have built nests in the pot soil.Under 1000 grams, or mix 40%of the pistachio emulsion with 1000 grams of water, 5 to 10 grams of pyramids, pour the medicinal solution into the pot soil and ants, and then seal the entire Flower pot with a plastic bag for 12 hours.Kill all the ants.

baby sleeping bags are good or no legs are better

Which type of Baby sleeping bag is used, or judge according to the actual situation.When the baby is young, you can choose an integrated sleeping bag, because the baby's activity is not large when sleeping at this period, and the integrated sleeping bag is relatively warm.Babies over 1 year old often turn around, kick their legs, if the baby will go crawling or sleep at night, you can choose to divide the legs, otherwise the baby will often entangle himself in his sleep.Essence

How to buy baby sleeping bags

1. Look at thin thick

When choosing a Baby sleeping bag, you must consider the climate of your place, and then consider what constitution you belong to, and decide the thinness of the sleeping bag you bought.If you live in the north, there are heating indoors in the winter, and the temperature is generally about 18 degrees, so you should choose a thin, suitable sleeping bag suitable for spring and autumn.If it feels cold, just cover a layer of blanket on the sleeping bag.

2. Look at the style

In addition to split legs and no legs, baby sleeping bags can also be subdivided into vest, cocoon -style, Sleeve quilt, clothes, etc. No matter what baby sleeping bags are used, you can choose as long as the baby is comfortable.

3. Look at safety details

The zipper of the baby's sleeping bag must be safe to protect, and such a zipper will not scratch the baby's Skin.Some of the connections of some Sleeping bags are buckled with buttons. There is a large gap between the buttons and the buttons. When the baby sleeps hard, he will extend his small feet out. In this case, not only the baby's small feet are easily cold, but alsoIf you accidentally hold your small feet and have not been discovered for a long time, you may have serious consequences, and all products must be selected.

4. See if it is convenient

Try to choose a sleeping bag with a two -way zipper design, because this kind of sleeping bag can be opened directly from the bottom, or the diapers can be changed or urine.Babies who can walk can even walk to the toilet in a sleeping bag by themselves, which reflects the convenient role.

5. Look at the color

Considering the unsafe factors in fabric printing and dyeing, it is recommended that you choose a Baby sleeping bag with white or light monochrome lining as much as possible.As much as possible to avoid unnecessary pollution.

6. Smell the smell

When buying a Baby sleeping bag, don't forget this.If the smell of the baby's sleeping bag is pungent and strange, it is recommended that you give up the purchase, even if it is someone who gives you you.This type of Baby sleeping bag is either problematic in printing and dyeing, or there is a problem with filling.

7. Look at the size

From an economic perspective, the kind of extended Baby sleeping bag is better. A high -quality Baby sleeping bag is not a problem with two or three winter. The extended Baby sleeping bag can be adjusted appropriately according to the baby's head.

8. See demand

Generally speaking, preparing 2 to 3 Sleeping bags for babies is enough.Most mothers are willing to bring their baby diapers at night. There are few opportunities for babies to urinate, so there are 2 Sleeping bags for use.If your baby is only a few months old, it is recommended to choose a quilting type with a vest Baby sleeping bag.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

What is the size of the life circle

The specifications of the lifebuilding circle are required, the lifebuilding circleThe outer diameter should not be greater than 800, and the inner diameter should not be less than 400.1.5kg Children's Life Circle size is 510*340*90 (mm); 2.5kg adult life -saving circle size is 720*440*105 (mm); 4.3kg adult life ring size is 760*440*105 (mm).The periphery of the life ring should be equipped with a cable cable with a diameter of not less than 9.5 and not less than the outer diameter of the life ring.This cable should be tightly tightened in the four distances around the circle and forms four equivalent rings.

Technical requirements for life -saving circle

1. There is an outer diameter of not more than 800mm and an inner diameter of not less than 400mm.

2. Made of natural buoyant material, its buoyancy shall not rely on lamp -hearted grass, cork plane slices or cork particles, any other loose granular materials or any air room dependent on inflatable.

3. The iron blocks with no less than 14.5kg in freshwater reaching 24h.

4. It has the quality of no less than 2.5kg.

5. Falling the fire is completely surrounded by 2S, not burning or continuing melting.

6. Its structure should be able to withstand the height or 30m (taking the big) from the storage position to the lightest carrier.

7. If the lifebuilding circle is equipped with a spontaneous smoke signal and a rapidly throwing device with a self -lit light, it should have the quality that is sufficient to operate the rapid throwing device.

8. There are 1 handle cable with a diameter of no less than 9.5mm and a length of no less than 4 times the outer diameter of the life ring.The handle cable should be around the life circle and fix it at 4 equal points to form 4 equal rings.

9. The life of the life of the river waters is not less than 1.5 kg. The purpose is to enhance the intensity of the life of the life of the life, and to the accurate throwing when the rescue falls, it is not affected by the wind and waves.

What are the belongings of the lifeburn circle?

1. Self -light floating light

Each Ship at least half of the life circle should be equipped with a self -lit light that meets the requirements of the rules so that it can display the location of the lifebuilding circle and its users at night, which is convenient for searching for rescue.At present, the self -bright floating Lights on the Ship are mainly used as the power supply.Once the life ring is put into the water, the bright floating light is automatically floating on the water surface, and a white flash emits.

2. Smooth smoke signal

There are at least two life -saving circles near each Ship's cab. At least two have spontaneous smoke signals that meet the requirements of the rules. When the lifebuilding circle is thrown, the smoke can floats on the water with the life circle and emits orange -yellow smoke.

3. Floating Life Covers

At least one life ring of the Ship should be attached to the requirements that meet the requirements. The length is generally thirty meters, or twice the distance from the Ship's light load water line to the storage area. The two are large.

Safe Circle price and Selection skills

1. Qualified life -saving circle products shall have relevant material inspection reports, type test reports and Ship embolism inspection certificates.Although there are very few complaints caused by quality problems in the life circle, any regular product should have basic elements such as factory names, factories, qualification certificates, and production date.At the same time, it should be operated in accordance with the relevant quality standards, and the use instructions of Chinese words should be attached.Because the lifebuilding circle is a special life -saving equipment, you must keep your heart when you buy it to avoid brewing during swimming.

2. At present, the reference cost price of the domestic qualified life -saving circle products is: about 55 yuan/piece of polystyrene clothing cloth, and about 100 yuan/piece of citrine polyethylene lifebirth circle.Therefore, the life circle with too cheap prices is likely to be a product that cut corners and should be purchased with caution.

3. Under the condition of conditions, the merchants are required to conduct necessary verifications of the weight of the life of the life circle, stitching quality, strength, floating, high temperature resistance, and resistance to damage in accordance with the standard requirements of the standard specifications.

What are the differences between lifeburn and swimming rings

Swimming ring: It belongs to water toys, with light weight, prone to damage, leakage, poor pressure resistance, and explosion.The plastic surface is slippery when water is wet, and it is difficult to grasp.It can only play auxiliary or protective effect in water leisure movement, and bring to the danger of deep water in the deep water area.

Life Circle: One of the water life -saving equipment, the production process is complicated, and the requirements are stricter.The rim core material uses a closed -hole foam material, that is, the polystyrene material, wraps the glass fiber cloth outside, is also applied to three layers of phenolic resin, and then the sails are covered with several layers of paint.The life of life must have fluorescent strips for convenient rescue.

Not a lifebuilding circle, you must not be used as a life settlement.The national standards performed by the swimming circle are different from the national standards performed. The lifebuilding circle is a life -saving function. It has many accessories; while the Swimming ring is defined as a water toy, it is only the toy standard.Therefore, compared with the real lifebuilding circle, the toy swimming circle is prone to damage the air leakage, the pressure resistance ability is very poor, it is easy to explode, the plastic surface is slippery, it is difficult to grasp the grip.Auxiliary or protection is dangerous if it is taken to the deep water area.

How to use the life circle

1. Soak in the water temperature of 30-40 degrees before the life ring is used. The plastic softening of the life ring and the air inside can only be used after the water temperature.

2. Do not charge too much when the life ring is inflated, because the current indoor temperature is limited, and if it is too full, all of them are cold air. Once put in the hot water of the swimming pool, the life ring will be full due to inflatable heat and swelling.The principle of cold contraction burst at the interface.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

What are the swimming equipment

1. Swimsuit trunks

Men generally wear swimming shorts, and there are also a few people who swim naked.women generally wear Swimsuits.Swimming trunks are necessary to fit.If it is too large, simply pocket water during swimming, causing the body's load and resistance and affecting swimming movements.Therefore, the Swimming trunks should be comfortable to wear on the body.As for the quality, middle -aged and elderly people should choose pure hair or cotton finished products, which should be dark.Young people can choose beach -style nylon Swimsuit trunks.

2. Swimming hat

Wearing a Swimming hat when swimming, especially women, can prevent scattered hair.Sometimes the water quality is not good can also prevent hair from becoming yellow.The Swimming hat should be selected with a loose nylon or finished rubber product.

3. swimming mirror

If the water quality is not clean, the bacteria enters the eyes very simple when swimming, resulting in red eye disease.To prevent eye diseases, we need to wear swimming glasses for swimming.For those who are new to swimming, wearing swimming glasses can also correct the problems that can not open their eyes in the water

4, earplugs

It is difficult to prevent water flowing into the ears when swimming.The ears are very uncomfortable after water, and sometimes it causes pain to cause hearing.In order to prevent water from entering the ear, earplugs should be prepared.

5. Floating items

For beginners, it is best to have some floating items.For example: life ring (clothing), foam plastic, buoy, Hanging water board, floating Sleeve, etc.However, when you have self -provided these items, you must check the life jackets and circles from time to time to prevent hair accidents.

6, bath towels and slippers

bath towels and slippers are necessary products for swimmers.After swimming, go ashore after swimming, dry your body with a towel, put on a bath towel, and put on slippers, which can keep warm, prevent wind, and compare cleaning.In winter, it is not short.

7, nasal clip

During swimming, because water waves often rush the water into the nostrils, seizure water and cough, especially the beginner swimmers, in order to prevent water from entering the nostrils, it is best to prepare a nasal clip., Can prevent the water from water

What are the suggestions for swimming equipment?

1. Bring a swimming mirror.Otherwise, what swimming looks like Dog planing.

2. With a pair of blue is enough for you to see clearly.Black is too dark, and white will expose the direction of your eyesight. Blue is just right, hidden and clear.Students with myopia remember to be equipped with a degree.

3. Wear black Swimming trunks/swimwear, at least the part of the border with the flesh is black.Otherwise, it is not easy to explain why the black line will be exposed.

4. The Swimming hat must be brought.And it is best to intertwine the color except green, which is the only identity information in the pool.Of course, this equipment is uniformly issued.

5. Men's trousers or shorts, conjoined or pure pants, shark Skin or line spinning.Because at this stage, the speed of equipment has improved by less than one tenth.but!For non -connected body, please confirm that the static friction brought by the tightness of the waist rope is greater than the water resistance generated by Zhameng.

6. women's swimwear, it is recommended not to wear swimwear with too much scattered cloth and too much connecting rope, otherwise it will be easily disrupted by water resistance.

7. Forbidden use of floating equipment.This is the biggest obstacle you can swim.

8. If you do not have special dependence, do not use nose clips.swimming does not need to hold back for a long time, if you hold your breath for a long time, you have not learned to change your breath.

9, earplugs are equipment that is different from person to person.Someone likes to be fully wrapped in water.However, friends who are prone to ear canal diseases are recommended to use.

10. The handboard and feet look at Hyun, the actual effect is average.These two are used to feel speed and water, but when you are used to motorcycles, you will lose interest in cycling.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to install the kitchen corner rack

1. Prepare tools, the most important thing is to prepare a shock drill.It should be noted here that according to the size of the expansion screws, choose the drill of the largest one.

2. First compare the rack to the approximate position, then measure the height and the hole distance with the tape measure, and use the pen to mark it.

3. Use impact drilling.Installed alone.

4. Put the expansion screws in the hole and fix it with a hammer to fix the expansion screws.Different types of expansion screws are different. You can search the Internet online to find the specific one for you.

5. Insert the rack into the fixed screw, it is OK.

6. It should be noted that the hole eyes need to be slightly upward when punching, avoiding the rack tilt down because of gravity.

The corner of the storage corner is light and convenient. The installation is simple and easy to use. It can be used in many places such as office and warehouses. It has a good effect on the finishing of items. It does not take up space. The design is reasonable and conforms to the three -dimensional structure.

kitchen corner shelf daily cleaning method

1. You can use cotton wet cloth with toothpaste and soap, gently wipe the kitchen corner shelf, and then wash it with water.

2. Because the long -term residues of chromium -plated surfaces such as various washing, shower gels, etc., will make the surface of the kitchen corner shelf degenerate and directly affect the surface quality.Please clean the surface of the kitchen corner rack at least once a week, and it is best to use a neutral cleaner.

3. You can use wax oil with strong decontamination capacity, apply it on a clean white cotton cloth to thoroughly clean the entire kitchen corner stand. The cycle is generally 3 months, which can extend the life of the kitchen corners.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.

4. For the stubbornness, surface dirt film and stains that are difficult to remove, please use mild liquid cleaner, colorless glass cleaning solution or polished liquid without wearThe shelf is dry with a soft cotton cloth.

After a brief introduction of the above content, everyone should have the kitchen corner racks, and understand more in detail.The kitchen corner shelf is generally installed in the corner position, that is, its shape is 90 degrees, so it is more convenient for people to use in space. Of courseDifferent service life, in the process of using the kitchen corner rack, it is necessary to regularly clean it, which can enhance the aesthetics of the kitchen to a certain extent. I hope that the above content will help everyone