one,Is it useful to protrude the waistband on the waist?

The lumbar disc herniation is due to the degeneration of the lumbar disc, the fiber ring rupture, the nucleuucleucle protruding backwards, stimulation and or compressing the spinal nerves or spinal cord to produce lumbar and back pain with sciatica as the main symptoms.

There are many treatment methods, such as physical therapy, traction, small needle knife, drug treatment, etc., serious may have to consider surgery.

If the lumbar disc herniation is not serious, it can be cured by traction massage.

The lumbar disc protruding Belt can reduce the pain appropriately, which is a little helpful for pain. It has a certain auxiliary therapeutic effect on lumbar disc herniation. Generally, side effects are not too obvious.

two,Which kind of waist is to buy on the waist disc protrudingbring

Ordinary warm waist

This type of waist is mainly made of cotton and wool, and it also adds elasticity such as Lyca, polyester, and nylon.This type of waist protection is mainly to keep warm, and cashmere is the best. However, the disadvantages of such materials are that they perform poorly in assisting fixed waist.Moreover, because the sultry relationship cannot be used in summer and autumn.In addition, for the ladies who love beauty and beauty, because of the thickness of the thickness, it looks bloated after putting it on, affecting the fit and beautiful coat.

Spontaneous heating waist with magnets or activated carbon

This type of waist protection has spontaneous heating and magnetic therapy. The added magnets and the human body interaction emit heat. The human body is continuously heating in the cold season, so it is loved by many consumers.However, these activated carbon or magnets have a life cycle. Over time, the heat performance will be reduced.

In addition, activated carbon or spontaneous heating are not adjusted according to the human body's own needs and comfort. Excessive fever will make the human body sweat. The savory accumulation of sweat is difficult to exude in the material of the waist protection. When encountering cold wind, the temperature of the joint area will be accelerated.The discomfort is worse, and it is not suitable for summer and autumn.

Electric waist

This type of waist protection is generally set up internally, which can generally be used6 ~ 12In an hour, its safety, warmth, and convenient features have been favored by many consumers. However, such products cannot be used anytime, anywhere, nor can they freely adjust the temperature. In terms of functional design, it is often unable to take care of ergonomic design in orderIt is lacking in the design of the auxiliary waist and the function of restoring the natural curve function of the waist. Naturally, it is not suitable for summer and autumn.

Summary of the knowledge of the Belt on the waist plate

You can choose the appropriate Belt according to your needs, mainly for your own comfort, and do not blindly exaggerate the effect of the Belt.After all, the Belt has little effect on the treatment of lumbar muscle strain and lumbar disc herniation. Friends who are advised to have a lumbar disc herniation insist on traction massage every day. Pay attention to rest.Food.

3. Preventing lumbar disc herniation, we need to reasonably choose the waist cushion

For friends who work for a long time, doctors recommend that at work with a waist -cushion to protect the waist, give the waist better to prevent the lumbar disc herniation or reduce the pain of the lumbar disc herniation.Choose the cushion of the lumbar disc herniation to prevent lumbar disc herniation, but you can't buy it yourself. Let me introduce it to you.

Lumbar straps

Choose the support of the cushion's head to the waist. The cushion with the curved is better than the no curved. The cushion on the market also has the front curved curved, but it is only the difference between the amplitude.The correct place is from the position of the scapula to the hip position. You must choose the style that can be attached to the most of your waist arc.

Waistband material

The material on the market can be divided into four types: mesh, elastic cotton, memory foam, or plastic sheet. Doctors believe that everyone feels different.To say, memory bubbles and plastic sheet materials have strong support.

Time for Belt use

Select different cushions and replace according to the season, such as mesh cushion or plastic material cushion is cushion cushion is cooler and breathable, and it is not easy to feel sweltering and discomfort in summer.In winter, switch to a thicker cushion.People who often take a ride, take a plane long -distance travel or go out, you can choose a folding cushion, easy to carry, or adjust the appropriate position according to your own waist arc and seat.

BeltneedBe in line with a sedent

Fill your hips to fill the chair, so that the back of the waist is completely tightly attached to the back of the chair;;The angle of the back and the hips is different according to the back of the chair back, about90~110Degree, make the lumbar spine arc naturally protruding beforeItemsIn order to maintain the Smooth blood circulation of the legs and the effort of the hip joint, the two feet should be able to place the ground flat, make the knee height or slightly higher than the hip, and empty about a fist on the front of the knee and the chair2 (2~3InchCureDistanceItemsIf the chair is too light, avoid using too thick cushions.Because if the chair is already very shallow, put a too thick cushion, but it will make the hip space less.

The breeding method of Venus Catcher

1. Light: Flying Totics is full of light, and it takes at least 4 hours of direct light every day.The light time is insufficient, and the inner clip grows small, which may lead to the death of plants.If you lack the sun in winter, you can use a fill light.

2. Moisture: Try to use soft water such as pure water and rain. Watering with potting is more appropriate.

3. Humidity: The humidity of the breeding environment is large.You can use a large water plate to make waist water, or you can add layer of water moss to its surface soil.

4. Soil: Flying Tadao like acidic environment, the substrate is best to keep the acidity of PH3.5-5.Puts without adding Fertilizers and perlite (2: 1) or pure water moss are good matrix choices. The substrate is best to replace once every spring.

5. Temperature: The growth temperature is 15 35 , the most suitable temperature: 21 35 . If you want it to sleep, you can control the temperature to about 5 C (0-8 C).

6. Feeding: During the day, photosynthesis provides nutrients for the growth of flytrap. The insects you eat can also provide nutrients like fertilization. You can feed insects when breeding, but not too much, too frequent.It should be noted that chicken and beef are difficult to digest for them.

7. Fertilization: Put the Fertilizer directly into the matrix meetingAs a result, the death of the plant is extremely impossible to salt because the root system of insects.Fertilization should be sprayed with low concentration liquid Fertilizer on the leaves.

Venus's breeding method

1. Leaf insertion method: Flying Tottery grows strong in the late spring to early summer. Dig out the flytrap from the soil, connect the pest of the flytrap, and strip the petiole in the white petiole.Put the petiole on the cultivation medium, maintain high humidity and give sufficient light, and new buds will emerge after a few weeks.

2. Sub -method method: When the flooding tract grows out of the side buds, as long as it is large enough and has a complete root, it can be planted separately separately.

3. Flower bud method: Sometimes because of temperature difference, the flower catcher's flower buds will become a plant, and the temperature difference between day and night will induce the flower catturing flower buds into new plants.Get a new flytrap.

1. How to choose a tree for Outdoor suspension

Outdoor leisure activities, sleeping on the Hammock is a very good experience. Outdoor suspension is generally tied to the tree. It should be noted that it is not necessary to choose two trees, especially the weather in the mountains is unpredictable. ChooseThe appropriate tree tie the suspender is more important. Generally, the main attention is to pay attention to the following four points:

1. Do not choose a crane chicken group to avoid becoming a lightning rod when bad weather.

2. The diameter of the tree should not be detailed. Pay attention to the trunk diameter of more than 10cm.At the same time, it is confirmed that the binding trees are alive to avoid fracture after the bearing bearing.

3. It is also alive to confirm that the trees around the trees are also alive, avoiding the dead branches from falling.

4. The ground under the suspension is flat. There should be no stones or sharp objects. You must also stay away from the cliff and avoid honeycomb and ant nest.

2. Will the Hanging machine hurt the tree?

Outdoor hammocks are generally tied to the tree, so will the suspension tie the tree hurt the tree?

It is understood that different tree species that have done research abroad have a 10 cm diameter and lively healthy branches. For tensile tests, the average of 900kg is required to be broken.Sentences say that people's weight at most 100kg is insignificant for trees.

The real damage to the tree is directly damaged, such as hurting the bark, increasing the wound that cannot be recovered, and the professional suspension rope is designed by reducing the tree damage.When it is not worn out of the bark.

However, it should be noted that the traditional suspension tie rope is relatively thin. When people sleep on the Hammock, the rope will hold the bark and cause certain damage to the trees. ThereforeOccupy the cross -wounding method of more area to prevent the tie rope from being too thin and piercing into the trees.

What is the Fertilizer of slow release Fertilizer

Slow -efficient Fertilizer is also called long -acting Fertilizer and slow -release Fertilizer. The compounds or physical states presented by these Fertilizers can be slowly released for a period of time to continuously absorb and use the plant.The dissolution of soil solution must be dissolved after a short -term transformation before it can be seen. However, Fertilizer effects are relatively long. The release of nutrients in Fertilizers is completely determined by natural factors and has not been manually controlled.

The role of slow release Fertilizer

Slow -efficient Fertilizer is often used as base Fertilizer, and the main function is to supplement the nitrogen element required during the growth of plant.

How to use slow release Fertilizer

To avoid the root system, just sprinkle around the crops (plants).There are mainly the following methods:

1. Soil mixed: Slow -release Fertilizer can be mixed directly with the soil.Mix the appropriate amount of mild release Fertilizer and potted soil and plant it.

2. Dig pits and Fertilizer: mix the mixed -release Fertilizer into a small amount of potted soil, and then cover it with soil.

3. Large -scale application: block fertilization, put the sustained -release Fertilizer into pieces into a Flower pot.

4. Light burial: Buried on the surface of the soil, although the fertilization method is more troublesome, it is a better fertilization method that can make the fertilization efficiency more uniform without losing the fertilization efficiency.

Is the slow release of Fertilizer on the surface?

Generally speaking, most people now sprinkle the sustained -release Fertilizer on the surface of the matrix when using the mild release Fertilizer. This method is more convenient and fast, which can create a gradual infiltration nutrition transmission system for plants in the Flower pot.However, there are also disadvantages of this method. When the wind is blowing the Flower pot, the Fertilizer will be split, or the Fertilizer may overflow from the Flower pot when it rains, causing losses.The editor recommends that it is best to use a shallow method to fertilize, that is, digging a few small holes without damaging the root system to bury the slow -release Fertilizer.

Will slow release Fertilizer burn the root?

Basically, there will be no roots. The release time of slow release Fertilizer is very long. The shorter may be about three months, and the long one can be up to one year.Essence

The difference between slow release Fertilizer and Compound fertilizer

Compound fertilizer refers to Fertilizer containing two or more nutrient elements, mainly contain nitrogen, phosphorus, potassium, and other medium and trace elements. The nutrient content is high and the side components are small, which can meet most of the nutrients needed for crops.

Slow -release Fertilizer is a slowly released Fertilizer. It contains only the element of nitrogen. The ingredient is single. The main role is to supplement the nitrogen element required during the growth of the plant.

The difference between slow release Fertilizer and control release Fertilizer

1. Release and Fertilizer effect

Slow -release Fertilizer is the effect of slowing nutrient release rates in the Fertilizer through chemical and biological factors. During release, it is affected by many external factors such as soil pH, microbial activity, water content in soil, soil type, and irrigation water volume.

Controlled Fertilizer is to wrap the water -soluble Fertilizer in the form of an outer envelope to slowly release the nutrients in the membrane. When the Fertilizer particles of the envelope are exposed to the humid soil, the water in the soil penetrates into the interior through the envelope, so that some Fertilizers can dissolve some Fertilizers.Essence

2. Nutritional ingredients

Most of the mild release hypertrophy is single Fertilizer. The main varieties are slow -effective nitrogen Fertilizers, also called long -acting nitrogen fertilizer, which is small in solubility in water.After the soil is applied, under the influence of chemical and biological factors, Fertilizer is gradually decomposed, and nitrogen is slowly released to meet the requirements of nitrogen during the entire growth period of the crop.

Most of the n-P-K-K Compound fertilizer or the full nutrients with trace elements are mostly controlled. After the soil is applied, its release speed is only affected by the soil temperature.

3. The release speed of nutrients

Slow -release Fertilizer releases uneven nutrients, and the speed of nutrient release is not necessarily completely synchronized with the nutritional needs of crops.

The speed of controlling Fertilizers to release nutrients is more consistent with the speed of the plant's nutrients, which can meet the nutrients of plants in different growth stages of nutrients.

What are the types of medicine packaging

1. Internal packaging

Internal packaging refers to the packaging directly in contact with the drug, such as Anxuan, injection bottle, aluminum foil, etc.Internal packaging should ensure the quality of drugs in the process of production, transportation, storage and use, and facilitate medical use.The changes in the packaging materials and containers (pharmaceuticals) in the drug should be trials of stability tests according to the material of the selected pharmaceutical packaging material to examine the compatibility of the pharmaceutical packaging material and the drug.

2. Packaging

The outer packaging refers to the packaging other than inner packaging, which is divided into medium packaging and large packaging according to the inside out.The outer packaging should be selected from the characteristics of the drug that is not easily damaged to ensure the quality of the drug during transportation, storage, and use.

What are the requirements for pharmaceutical packaging materials

1. certain mechanical performance

Packaging materials should effectively protect the products, so it should have a certain strength, toughness, and elasticity to adapt to the effects of static and dynamic factors such as static and dynamic factors such as pressure, impact, and vibration.

2. Blocking performance

According to different requirements for product packaging, the packaging materials have certain blocking water, water vapor, gas, light, aroma, odor, heat, etc.

3. Good safety performance

The toxicity of the packaging material itself should be small to prevent pollution products and affect human health. The packaging materials should be non -corrosive and have the properties of insects, moth -proof, rat, and inhibit microorganisms to protect product safety.

4. Appropriate processing performance

The packaging materials should be appropriate to process, and it is easy to make a variety of packaging containers. It should be easy to mechanize and automate the packaging operation to adapt to large -scale industrial production should be suitable for printing and facilitate printing packaging signs.

5. Good economic performance

The packaging materials should be widely sources, convenient for materials, and low cost. The packaging materials and packaging containers after use should be easy to deal with, not polluting the environment to avoid public harm.

What is the role of medicine packaging

1. Protect pharmaceutical products

In the process of pharmaceutical products from the factory to the user, after multiple transportation and storage Links, there will be damages such as vibration, squeezing, collision, sun exposure, and rain during transportation., Rat bites, corrosion, etc.Even in the hands of the user, there are still requirements for storage from the beginning to use.Therefore, there must be good packaging to prevent medicine from damage.

2. Easy to transport, carry and store

Medical products include different forms such as gaseous, solid, and liquid. They are also different in their physical and chemical properties.Most of the time is in the warehouse (from the warehouse of the pharmaceutical factory to the warehouse of wholesale, retail enterprises or medical units), and need to be transported and loaded and unloaded frequently. Only the appropriate packaging is convenient to transport, carry and store it.Most pharmaceutical products need moisture -proof, light -absorbing, and heat protection during storage. Some special drugs need shock -proof and explosion -proof during transportation.Drugs and dangerous goods in special medicines need special packaging.Good packaging can make the quality of pharmaceutical products not change throughout the circulation process, thereby ensuring the realization of its use value.

3. Guide consumption, easy to use

There are text descriptions in the packaging of medicines. The specific introduction of product performance and precautions can play a role in facilitating and guiding consumption.In addition, according to the dosage of the medicine in normal use, such as 1,000 pieces of pharmaceuticals, 100 tablets (suitable for individuals), etc., the packaging container uses tensile -type, built -in -type canned cans, zipper -type packaging boxes, jet type types, jet typesPackaged containers, etc., and explain the usage, dosage and taboos on the packaging, are also for easy use.

4. Beautify goods and promote sales

After the goods are packaged, the first thing to enter the consumer's sight is often not the product itself but the packaging of the product.Unique, refined and beautiful packaging can enhance the beauty of goods, stimulate consumers' desire to buy, and play the role of silent salesperson.According to the British market survey company survey, women who go to supermarkets generally go to supermarkets. Due to the attraction of packaging and decoration, things purchased on the spot usually exceed 45 % of the planned purchase amount.Therefore, the function of packaging is more concentrated in enhancing the attractiveness of products and promoting sales, especially OTC drugs, and packaging is more important.

5. increase profit

The internal quality of goods is the basis for the competitiveness of the commodity market, but if a high -quality product does not cooperate with a high -quality packaging, the competitiveness in the market will be weakened and will reduce the "identity".Good packaging can complement the two of the good products, sell good prices, and increase the added value of products, which is more obvious in the international market.For example, the traditional Chinese exported precious medicinal ginseng, in the past, was packed in a wooden box with 20 pounds per box. As a result, the price was low, the sales were poor, and it was suspected of adulteration.Later, the exquisite small packaging, the price increased by an average of 30 %, and the sales volume increased significantly.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;