fishing tips for fishing catfish in different seasons

Drilling skills of fishing catfish in spring

During the early spring, the water temperature began to rise slowly from the cold winter, all things began to recover, and catfish began to be active. They had to be busy laying eggs, looking for food to replenish physical fitness.Earthworm fishing effects will be very good.At this time, the drift should be tuned in the middle, lowering the eyes and low eyes, tuning three or two or four fishing and three, and the line group must be thinner.

After Zhongchun, that is, in April and May, the catfish was almost finished. Nowadays, the catfish is thinner because of its egg laying. At this timeIt is best to catch, and the spawning season has slowly passed. At this time, the catfish are thinner. At this time, they have increased their food volume, and they do not picky eaters.The effect of fishing for catfish will also be more fierce, all of which are tangled. Now adjusting 5 fishing 3 and 4 fishing 2 will make the float signal more clear and obvious.

I won't say it in summer, it's not suitable for fishing catfish

Drilling skills of fishing catfish in autumn

In the fall, after this half of the year, catfish have grown up, and the catfish fishing now will be relatively large.Usually use earthworms or bait.If it is fishing with bait, when the catfish exports, the floating signal will be more obvious.If you fish with earthworms, it is best to flatten the two or three eyes, and it will be obvious.

winter fishing tone drift skills

In the winter, the fish that can be caught can only be left.winter is similar to the drifting method of fishing for catfish. The weather is cold, the water temperature is low, and the fish's mouth will be lighter, so at this time, you must fishing.Is there any bait?In winter, catfish, usually the method of drift is to adjust the method of drifting similar to the same, adjust three or four eyes, fishing three or four eyes, and you must stare carefully.It will be very high.

Finally, I remind everyone that the drift method of fishing for catfish every season is different, and the taste of the bait will be different. In spring, use fishy bait, light bait in summer, bait in autumn, and thick bait in winter.

bait and bait formula

Three bait classic formula

First set

The Terminator of the Big Cain, 200g of 200g in the world, 200g of potato fragrance.This bait is 1: 1, which can be rubbed or pulled. As for how to use the fishermen to master it, this bait is suitable for fishing in three seasons of spring, summer, autumn.

Second set

Crazy fishing cats 200g, 200g of red devil, 100g of catfish storm, 100g of musk bottom nest.This bait is 1: 1, which can be rubbed or pulled. The flavor of the bait is suitable for the use of wild fishing catfish in spring and autumn. Of course, how to use this fisherman.

Third set

Lan Pan 200g, algae element 50g, catfish set 100g, Dongjunmiao 200g. The water ratio of this bait is 1: 1, and it can still be rubbed and pulled. Of course, how to use this fisherman himself.The taste of this bait is moderate, suitable for the eloquence of catfish in three seasons of spring, summer, autumn.

Four wild fishing classic nest materials

Cotton nest

Although rice is generally used as a bait, many fishermen use it as a nest, such as preparing 1 meal, 3 copies of rapeseed cakes, 1 cottage bait, and then stir well.Of course, in myself, I used to use egg fried rice to fight the nest. When you say it, you may not believe it. The effect is really good, and the catfish fishing is very large.

Jam

In fact, the old fishermen may be familiar with the strong penetrating wine and rice nest ingredients, and they know that there are a lot of practices, but before making catfish wine, it is best to fry it and soak it.At this time, it can't be too full, because it will swell in the later stage.

Cake nest

As we all know, good nests must not only have atomized fish, but also have the effect of staying fish.Of course, there is also such a kind of nest. It does not need to be matched with any nest. It has the effect of lure fish and fish. It is the most bran cake nest used by Hunan people.This kind of nest can not only seduce large catfish, but also the temptation of carp and grass carp.Leisone

Fishermen know that everything that is soaked in wine is very penetrating, such as the grase bait that rural fishermen like to use.Although it is relatively sparse, as long as it is used with Wheat bran and peanuts, the effect is good. At the same time, it not only seduces a lot of catfish, but also has a strong temptation for carp, catfish, and grass carp.

Disaster rescue Tent size size

1. Furnishing disaster relief Tent

Household disaster relief tents are a very common disaster relief Tent. The color of the disaster relief Tent is dark blue. There are two types of home relief tents. One is 4m*width and 3m. This is a disaster relief Tent.The other is 5m*width and 3m long. This is a small Tent. If a disaster occurs, it can accommodate 4-5 people at a time.The larger ones can accommodate about 7 to 8 people, and the specific situation is adjusted according to the specific situation of the disaster.This kind of disaster relief Tent is designed by the family. The disaster relief Tent is strong and can resist the level 7 ~ 8.

2. Medical disaster relief Tent

Medical disaster relief tents are a kind of Tent with a white background. This kind of disaster relief Tent is relatively large. It can reach another kind of Tent is a white red side. This Tent is relatively large, 6m*width 4m*height 3.8m. ThisPlanting medical disaster relief tents are generally used for medical staff.In the case of Earthquake or landslide accidents, in the case of inconvenient transportation, injuries can perform surgery in the medical disaster relief Tent. This medical disaster relief Tent can accommodate 20 or 30 people at a time.

3. military disaster relief Tent

military disaster relief tents will be smaller, and this military disaster relief Tent is divided into the upper and lower layers. The smallest military disaster relief Tent is 3m*2m long. It can live up and down.The disaster relief Tent is generally 6m*5m wide. A single layer can live in twelve people. A total of about 24 people can live up and down.The largest military disaster relief Tent is 10m in length and 5m, 20 people live in a single layer, and 40 people live in double -layer.This kind of Tent is used to live with such disaster relief tents when it is inconvenient to migrate and does not allow conditions.

What is the price of disaster relief tents

The types of disaster relief tents are different. Take medical tents as an example.Medical disaster relief tents are rescued by the Red Cross, military, civil affairs, and health departments when earthquakes, floods, fires and other disasters.This kind of medical disaster relief Tent was used in inflatable. Before inflatable, the disaster relief Tent was small and facilitated to carry it with you. In addition, the medical disaster relief Tent did not need to be built. In the case of emergency, the medical disaster relief Tent could be inflated in 3 to 5 minutes.The medical disaster relief Tent 5 ~ 8 minutes can put away the state before inflatable.

The quality of the medical disaster relief Tent is very good.Among them, the PVC coating polyester of the medical disaster relief Tent is very weaving. It can be used at -40 at a temperature of -40 . The maximum temperature can bear 65 high temperature. The framework of the medical disaster relief Tent can resist the magnitude 6 ~ 8 Earthquake.The quality and size of the medical disaster relief Tent are different, and the price is different. The market price of medical disaster relief tents ranges from 200 ~ 4,000 yuan.

How to build a disaster relief Tent

1. Remove 8 general rods and three sets of end frames with fixed steel wire ropes, and the middle frames are placed in three groups of human shapes and connected.Taking 4 rods with the three -link of the end frame and the four -way frame of the middle frame.

2. Set the overall cotton bile on the three sets of human character frames, and adjust the position to make the cotton Tent aimed at the middle pole of the human character frame.Place the top of the outer Tent on the outside of the three sets of human -like cotton and adjust the position.

3. Take the 6 rods of the standing rods and insert the three -link of the end frame and the middle frame, respectively, and use 6 people to push the canopy at the same time, and connect it with the placed ground rod passage.Paste the side wall of the cotton and the cotton bile mountain wall with nylon and adjust the position.

4. Tie the tie of each Tent of the Tent bodies through the copper canopy circle of the cotton inner inner line.The tie bands are tied in each part, the nylon zipper is buckled, and the position of the Tent is adjusted to connect to each rod of the frame.

5. The side walls and gables of the inner wall of the ground Tent are bonded through nylon sticking.Put the triangle piles in the corresponding position on the ground, fix the pull rope, adjust the tightness, and put the rubber and plastic pile head on the ends of the triangular pile.Sort the Tent and bury the soil along the Tent.

Disaster relief Tent

As the most commonly used disaster relief supplies, the disaster relief tents require the team members of the rescue team to master the construction method and guide the victims to assist the construction in the disaster area to improve the efficiency of work.Share it with tents:

Divided into good workers, selected materials, a total of 20 light rods; 4 long roots are door columns; short 8 roots are surrounded by; the remaining 8 roofs.

There are 4 heads on the right corner; it is the long side of the Tent.There are 6 heads on both ends of the blunt corners; that's the long side of the top of the shed.There are 4 in the middle of the unicorn; that's the short side of the Tent.

There are 2 types of work; the Tent supports the beam; there are 4 human fonts; two doors on one side.

Mo heartlessly; pay attention to the main points.The roof canvas should be posted;

A four -sided wall, there are skills; canvas connecting the corner.The support beam is important; the distance between the two sides should be equal; the careless roof is crooked.Work together to connect the thread; the Tent sets up to protect the victims!

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Introduction to TV Background wall setting rack

The design of the TV wall at home is to make the TV Hanging there, but there are many small Dongxi on the side of the TV, so the TV wall standing rack can be used.Come on the TV, the TV wall stand can allow the space to separate at home.

The installation method of the TV Background wall

1. Preparation tools: wrench, pliers, electric diamonds.

2. Observe the wall.Install the shelf on the solid wall.

3. Horizontal measurement, draw the installation location on the wall.

4. According to the relevant drawings, punch perforation on the planned wall, and then fix it with a nail.

How to choose a rack

1. There are many types of racks. Common ones are glass racks, plastic racks, stainless steel racks, alloy racks and frames.When we choose, we can determine the material based on the occasions and storage capabilities. For example, the kitchen is suitable for the use of alloys, and the bathroom can be used to set up glass racks. The living room and I use the shelves to be beautifully set and the assembly is simple.

2. When buying the rack, pay attention to whether the bearing gravity is good. If the hung heavy object will cause the deformation of the shelf, this must be considered, because the root of the rack is the load -bearing storage, so we are buying it.Time also needs to be purchased according to the actual weight of your own storage.

3. When purchasing the storage racks used in a special top environment, it also depends on moisture -proof and rust and anti -rust and anti -rust.Of course, it is also important to clean it.

4. Regardless of the material of the material, we must keep the surface clean. We can often wipe it with soft cotton cloth and water.The solution, otherwise it will be corroded by the shelf, affecting the service life.

maintenance method of setting racks

1. If you want to extend the service life of the rack, daily cleaning is essential.For the dust and dirt on the surface, you can wipe it with water with a rag, and it is best to wipe the rags before rubbing, so as not to leave the water stain on the shelf, which will affect the service life of the material.

2. Usually it is best to wipe the rack with a soft towel. If you encounter more stubborn stains, you can use some cleaner appropriately, but you cannot use an acidic cleaner, otherwise it will damage the material of the product, which will cause it to deformed, cracking and other phenomena.Essence

3. When cleaning the rack, avoid removal of the cleaner on the surface. Long time will affect its surface quality and affect its gloss.So every time you clean, wipe it with a rag.

4. For the stubborn dirt that is difficult to remove, the simple wipe is incomplete, so you can use a cleaner to remove the dirt, but you must pay attention to the use of mild products to avoid damage to the material of the product, and it is best to use softness.Wipe the cotton cloth clean.

5. You can use a clean rag to completely clean the entire product, but you do nt need to clean it frequently. It can be cleaned every three months to extend the service life of the shelf and let it better serve us.

The most practical TV Background wall setting up

Honeycomb wall setting rack

When it comes to the wall standing rack, in fact, the first thing friends are considered the aesthetics of the shape of the wall shelf, so here to recommend a more fashionable wall -faced shelf shape for everyone.The design of the shelf is generally suitable for owners with small living rooms like this.The honeycomb display board is a classic combination of black and white. It mainly places some artworks. The main feature of this panel is the strong artistic atmosphere. Not only can it be placed in the honeycomb, but there can be many artworks on the honeycomb.Essence

Geometric pattern wall setting rack

If there are children in the family and the toys that are losing the ground and on the bed, the mothers must be very troublesome, then at this time, we might as well DIY a wall stand to use these toys to use these toys to decorate the decorations of the children to decorate the decorationThe wall, this can also give the child a just growing environment.

Personal creative wall setting rack

It is precisely because friends are no longer novel about the wall sets in the window, so they have the idea of their own DIY wall sets of racks.Some friends who like personality and creativity can give full play to their imagination at this time, and use some special materials as possible.

Geometric stainless steel wall surface

Regarding the choice of wall -faced racks, in fact, the shape is only one role that affects its decoration. In many cases, because the material of the wall of the wall is different, the style is also very different.It is simple geometric. Because stainless steel is made of stainless steel, it will be very rigid and textured when the wall is matched.

Is the ankle useful?

Ankle protection is a kind of sports protective gear that protects the ankle joint of the human body. It is suitable for motion of hair balls, tennis, football, bicycles, dances, etc., or is used for reincarnation, postoperative fixation and rehabilitation intensity protection in the ankle joint.

The ankle protection is a protective effect on the pressure of the ankle joint. It is a lightweight ankle -protective appliance. It is suitable for preventing and ankle sprain, ankle ligament injury, and unstable ankle.It can play the role of the alarm and ankle movement, prevent sprains caused by the ankle, reduce the pressure of the ankle injury, strengthen the ankle joint, and promote the healing of soft tissue cure of the damage tissue.Generally speaking, the protective gear is tight to effect. The protective gear is made by elastic materials. It must be tightened by the joint, which is equivalent to adding a protective film at the joint.If it is loose after putting on, the effect of exercise is not good, it can only be used as warm.Of course, the protective gear should not be too tight, affecting blood circulation.

The ankle is worn inside the socks or outside

The ankles can generally be worn closely. It is not particularly particular about wearing socks or socks. It depends on the comfort of personal comfort.The main reason is that the protective cover should be tight on the joint.The ankle beam is made of foam rubber material. The surface composite knitted fabric is made of chemical fiber. The breathability of the overall material is worse than the ankle protector of a knitted and elastic bandage.When the weather is hot.Therefore, if you feel uncomfortable to wear, you can choose to put it outside the cotton socks to help absorb sweat.

How to tie an ankle

The effect of bandage ankle protection is higher than that of ordinary ankles, and it is more professional.The price of a penny is tied to 5 cents, and the cost -effectiveness is high. This bandage can also be used as a knee pads, elbows, and arms surrounding protection, which is worthy of use.

1. Start from the instep to the arch.

2. Turbing the ankle.

3. Go to the back.

4. Turn over your feet and go around your ankle.

5. Go back the ankle and complete.

precautions

Don't be too loose or too tight in wrapping. Too pine does not have a protective effect. Too tightly affects the blood circulation. The tightness is re -adjusted according to personal habits.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Why should the surfing board wax

surfing board is a Tool for our entertainment. Of course, no matter how good the surfing board is, it is also necessary to wax. The waxing surfboard can effectively increase the friction of the human body and the body.Sitting on the surfboard is easier to sit straight.

surfing plate wax (non -slip wax) is a special wax, mainly composed of wax, vegetable oil, pine fat, resin and natural essential oil.Generally, two waxes, bottom wax and facial wax.3a2418-24Water temperature is 14-18 C), and the cold water wax (below the water temperature below 15 C).

2. How to maintain and clean the surfboard

To make the surfing board play the greatest role, it is essential for maintenance and maintenance. So how to maintain and clean the surfboard?

1. surfing plate cleaning

Rinse and wipe it after each use. The sea water will cause considerable damage to the completeness of the surfing plate, especially when it suffers from some collisions and impacts, the salt section will cause damage from the inside through the small wound of the salt.Rinse with fresh water after each surfing.This is easy to achieve, and it will not take up too much.

In addition to rinse, deep cleaning is needed after several surfing.Depending on where you surf and the frequency of stay in the water are maintained in different ways.

2. surfing maintenance

(1) Ready to open board

The first step is always the most challenging.The first step is to confirm that there are no old, sand and dirty wax on the board.It takes a little time to clean up the old wax and place the surfboard in a sunny place.The sun helps to soften the wax.In this way, it is easier to melt and harden.With no sun, you can use hair dryers. Whether it is from the sun or a hair dryer, pay attention to the heat.

(2) Cut the diagonal line with a wax comb

Before waxing, scrape the wax on the surfboard with the knife surface of the wax comb and clean it with cloth. If you can't find a wax comb in a while, you can get a plastic card or replace the wax comb.The surface layer was scraped almost some warm water on the board.Softening the residue in warm water, wipe it off with a wet cloth.

(3) Use a surfboard to clean spray

After the warm water is cleaned, there will be some residues on the plate. In order to clean it more thoroughly, you can use a surfboard to clean the spray.Apply the surfing plate evenly, and finally wipe it clean according to the use time on the instruction manual.

(4) Apply with coconut oil

The last step is to completely wipe the entire surfboard.Apply a thin layer of coconut oil to protect the body.Apply a layer of fresh wax or fine processing spray after air drying.