1. What is the reason why the off -wild open camp lamp is not on?

When using Camping lights in the wild, sometimes the Camping light is not on. There may be many reasons, such as:

1. The Camping light is out of power and needs to be charged.

2. Poor contact with field Camping lights, and line failures, you need to check whether there is a problem with the wiring.

3. The LED bulb of the Camping light is burned, and new bulbs are replaced.

4. Outdoor open camp Lights are damaged due to breaking or water. This failure maintenance is more troublesome, and it is usually necessary to contact the merchant to repairs.

Generally, the Camping lights are not on. The main reason is the above reasons. Find the problem, and then the corresponding maintenance.

2. What to do if the Camping light cannot be charged

The Camping light is not on. Generally, if it is not a failure, the main reason is that it is out of power. After all, the Camping is in the wild, and there is no power supply to the Camping light to power in time.Sometimes the user's external power supply is charged with the Camping light, but found that it is not charged. What is going on?

Generally speaking, if the field Camping light is not charged, it is either a battery fails or the Camping light line is faulty; if the charging Camping light can be charged batteries, if there is a failure or failure, replace the battery, just replace the battery, just replace the battery.; If there is a problem with the Camping light line that causes the failure to charge, you need to check the line.(Note: Circuit inspection and maintenance is more troublesome. It is recommended that friends who do not have electricity knowledge do not rashly repair it by themselves)

3. Is the Camping light easy to break?

Camping lights are used during Outdoor Camping. The Outdoor environment is relatively harsh. Ordinary lamps cannot meet the needs of the use. Camping lights are designed for Camping. The shell materials are light and solid.It is not easy to break.

However, pay attention to using Camping lights. Do not keep the Camping lights all the time. Do not let the Camping light soak in water to avoid often bump or fall when the Camping lights are often bumped or falling. This will make the Camping lights longer life.

1. What are the colors of Sunglasses

1. Pink lens

This is a very common color.It can absorb 95%of ultraviolet rays, and some short wavelength visible light.In fact, such functions are similar to general color lenses. This means that pink lenses do not have a greater protection effect than ordinary lenses.But for some people, it is still quite psychological to help, because they feel more comfortable to wear.

2. Gray lens

Absorbing infrared rays and 98%ultraviolet rays.The biggest benefit of gray lens is that the original color of the scene is not changed due to the lens, and the biggest is satisfactory that it can effectively reduce the strength of the light.

3. Green lens

Green lenses can be said to be represented by the "Ray Peng series" lenses. Like gray lenses, it can effectively absorb infrared light and 99%of ultraviolet rays.But green lenses can make the color of some scenes distorted.Moreover, the effect of blocking light is slightly inferior to gray lenses. However, green is still not excellent protective lenses.

4. Brown lens

This type of Sunglasses is similar to that of green lenses, but it absorbs more blue light than green lenses.Brown lenses cause color distortion than gray and green lenses, so the satisfaction of ordinary people is also lower.But it provides another color choice, and it can slightly reduce the halo of the blue light to make the image clearer.

5. Yellow lens

It can absorb 100%ultraviolet rays, and allows infrared rays and 83%visible light penetration lenses.The biggest feature of yellow lenses is that most of the blue light is absorbed.Because when the sunlight is too atmospheric, it is mainly expressed in blue light (which shows why the sky is blue).After the yellow lens absorbs the blue light, it can make the scenery of nature more clear. Therefore, yellow lenses are often used as a "filter", or hunters are used when hunting.However, no one can prove that the shooter is better because of wearing yellow glasses.

2. How to match Sunglasses in different faces

1. Ellipse face shape: with Square, or smaller positive rectangular frame Sunglasses.This face is the most pleased, suitable for any kind of frame.

2. Round face shape: with a large lens Sunglasses, the rectangular frame is the best to outline the outline.

3. Face shape: with a round or elliptical frame, it is wide and light enough.

4, diamond face shape: with a piece of mirror frame.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. The difference between Ski shoes and ordinary shoes

Skiper and ordinary shoes are very different in terms of design, materials, use and special functions.

1. Different uses

The biggest difference between Ski shoes and ordinary shoes is their purpose.Ordinary shoes are mainly wearing shoes everyday, which can adapt to various occasions, such as walking, exercise, work, gathering, etc.Ski shoes are a kind of shoes designed for skiing activities. The focus is on the support and protection of Ski people to maintain balanced support and protection on rugged snow.

2. Different design

The design of Ski shoes and ordinary shoes is also very different.The design of ordinary shoes focuses on the appearance and comfort. There are many different styles, so that people have more choices and personality expression in appearance.The design of Ski shoes mainly considers that skiers maintain stability and protection in their actions.Ski shoes are heavier than ordinary shoes, because they need to provide sufficient support to prevent falling or injury during taxi.

3. Different materials

Skiper and ordinary shoes are also different.Ordinary shoes are usually designed with lightweight materials such as leather, canvas, and synthetic materials, making them more suitable for daily activities.Ski shoes need to use more durable materials, such as waterproof materials, warm materials, wear -resistant materials, etc., to better protect the foot of the skiers and prevent contact with cold snow.

4. Different special functions

Due to its different designs and uses, Ski shoes also have special functions that ordinary shoes do not have.For example, some Ski shoes are equipped with special claws to walk on steep hillside.Some high -end Ski shoes are also equipped with a special air filtration system to prevent snow from entering the shoes and provide better protection for the feet.

2. Can ordinary shoes Ski?

skiing is a stimulating and interesting sport, but it requires specific equipment to ensure safety and comfort.It is not recommended to wear ordinary shoes for skiing. The reason is as follows:

1. Normal shoes do not have enough grip.During skiing, you need to stop steadily on the snow surface and make various techniques.Ordinary shoes do not have the bottom lines designed for skiing, so they cannot provide sufficient grip, resulting in the speed and direction of skating hands cannot effectively control the speed and direction.

2. Insufficient protection of ordinary shoes and joints.During skiing, skating hands need to wear professional Ski boots because they can provide better foot support and joint protection.Ordinary shoes do not have such a function, which may hurt the feet and joints.

3. Ordinary shoes are easy to slip.During the skiing process, sliding hands need to move quickly on the snow surface. If the shoes are slipped, it will slow down or lose balance.Ordinary shoes have no anti -slip design, so it is easy to slip.

Third, can Ski shoes be worn usual?

Due to the design characteristics and functions of Ski shoes, it is not suitable for usual wear.The outer layer and rigid bottom of the hard -shaped or soft shell make the comfort and breathability of Ski shoes.And because its fixed ankle design is not conducive to daily walking and activities.Therefore, it is not recommended to wear Ski shoes.

1. Can general nutrient soil be used directly?

Try not to use the general nutrient soil.

General Nutritional soil is generally composed of fat field soil and rotten Fertilizer.Nutritional soil is a kind of soil specially prepared to meet the growth and development of seedlings. It contains a variety of mineral nutrients, loose ventilation, strong water and Fertilizer ability, and disease -free pests.Nutritional soil requires high organic matter content, complete nutrients, reasonable soil structure, and active microorganism.

General Nutritional soil is a good thing, but in general, the permeability and water retention of nutrient soil we buy are good.We must choose nutrient soil according to the habits of plants.However, according to the dry and humidity of soil water, especially some flower watering frequency is too high, it is easy to rot. If you are raised indoors, the pot soil is dry and slow, it is not suitable for the use of Nutritional soil.Persons to increase its permeability.Prevent the soil of the basin.In other words, we mix the soil according to the habit of flowers and mix water according to the habit of flowers. That is the best.

2. What is good for cultivating soil sterilization?

Because germ spores, insect eggs and live body, and weed seeds are often contained in natural soil, the prepared culture soil needs to be disinfected to achieve the purpose of eliminating germs and pests.The common disinfection method has the following:

1. sunlight disinfection method

Put the prepared cultivation soil on the clean cement floor or iron plate thinly, and expose to the sun for 2 to 3 days under the scorching sun.For example, in the summer, a large amount of germs can be killed, mycelium and pest eggs, and nematode.Although this method is not strict, it is simple and easy.

2. Heating and disinfection method

There are many methods for disinfection of soil disinfection, including cooking, high -pressure heating, and steam heating.As long as it is heated to 80 ~ 100 C, it can achieve the purpose of disinfection for 30 to 60 minutes.However, the heating time should not be too long, otherwise it will kill the beneficial microorganisms that can break down the Fertilizer, and therefore hinder the normal growth and development of flowers.If family flowers do not have a heating equipment, you can put the prepared culture soil into the iron pot, fry the stove for 20 minutes, or steam it in a high -pressure cooker for 10 minutes. It can also receive the effect of disinfection.

3. Pharmacy disinfection method

Commonly used Femarin with 40%formaldehyde to disinfection, sprinkle 400-500 ml of water in the soil of cubic meters of cultivation soil, and adds a diluted liquid of 50 times water, and then accumulates the soil, cover the plastic film on the top, closed 48After hours, remove the coverage and spread out the soil. After the Galmarin gas is completely volatile, it can be used.It can also be used with 50%bacterial spirit 50 grams or 65%Daisen zinc 50 grams, mixed with 1 cubic meter of cultivation soil, and after 3 to 5 days, the drug is volatile for one week.You can also use 0.1%to 0.5%potassium permanganate to pour stuffy for 2 to 3 days.

1. High installation of clothes hooks

1. Xuanguan

You can judge according to your family's height, so that everyone can get items. Generally, it is better at about 1.6 meters.It should not be too low, so you need to bend over with things, and if the clothes and buns are too long, you will mop the floor.

2. bedroom

Like in the porch, the height is more convenient to get items. Now there are coat hooks that can be hung directly at the top of the door, and the door of the bedroom will not be particularly high, so as long as you do not install too low.It is recommended to be a little taller than yourself, so as not to accidentally hit the hook.

3. bathroom

The installation height of the bathroom hook is also very important.Generally speaking, the installation height of the bathroom hook can be determined according to the height of the family, usually with 10 mm on the basis of the minimum member height.Such height will be more convenient when using a coat hook.You can also install the hook on the right side of the mirror to make the towels more comfortable and convenient.

2. How to install the hook

1. Positioning

The installation position of the hook must be determined, including width and height.There are single -clothes hooks and row hooks. When installing a single hook, a few clothes hooks are usually installed into a row of combinations. ThereforeThe width of the installation surface is reasonably calculated, and the distance between the single hook is divided to ensure the beauty after installation.The rowing hook does not have a width trouble. As long as the width of the installation surface is sufficient, it is generally installed in the middle position, so that the distance between the left and right sides is equal.

For height, it refers to the height of the hook from the ground. Generally, the height of the family is used as a reference. It is advisable to be about 1.5 meters to 1.8 meters.Beautiful; if it is too high, you need to stomach or step on a small bench to hang, so it is inconvenient to use.Therefore, the installation position of the positioning hook is very important.

2. Pole

After determining the installation position, it is best to draw the hole position with a marked pen, and how many holes are needed.Then use an electric drill to punch.However, pay attention to the size of the hole, and generally refer to the size of the hole on the hook.

3. Fixed

After the holes, you can put the expansion bolt into, or the wooden pillow, and determine the corresponding bolt according to the material of the coat hook.Then align the hook to the bolt, and finally use the screw to tighten and fix it.However, when the screws are screwed, pay attention to the flatness of the hook, which must be kept horizontal with the ground, and it must not be skewed, otherwise it will affect the effect of the clothes hook and the beauty of installation.