1. Does the fishing rod and the stream rod are the same?

no the same.

The Table fishing rods and stream rods belong to the hand rods, but they are not the same fishing rod. From the perspective of the fishing rod itself, the Taiwanese Fishing rods and stream rods are different in length and number.In addition, the Table fishing rods and stream rods are also different.Because the two are different in many aspects, they are suitable for different situations, and they are different in their application. They cannot confuse these two Fishing rods.

2. What are the differences between the fishing rod and the stream rod

1. Differential length

The main difference between the table fishing rod and the stream rod is the length.Generally speaking, the stream rod is generally short, while the Taiwanese fishing rod is relatively long. This kind of fishing rod is mainly used when using the way of Taiwan fishing.

2. Differential sections

The number of two sections is also different.Specifically, the number of poles of the Taiwan fishing rod is relatively small, but each pole section is relatively long; while the stream rods are just the opposite, they have a large number of poles, but they are relatively short.

3. Differential difference

The weight of the two is different. The former is a relatively light pole, and the weight of the latter is relatively heavier.

4. Different degrees of portability

The portability of the table fishing rod and the stream rod is related to their rods.The number of rods of the table fishing rod is relatively small, it cannot be fully contracted, and it is not easy to bring.However, the number of poles of streams is large, and it is easy to shrink, and it is easy to carry.

Third, which is easy to use for Fishing rods and streams

The use of the stream pole and the table fishing rod is not necessarily better:

1. The stream rod is suitable for fishing in small individual fish such as catfish in small waters. Making fishing in small waters such as streams is definitely easier to carry.

2. Catfish with less than 1 or two, as large as tens of pounds or even hundreds of pounds of giant can be ease. It is better to fish in large waters or breeding ponds.The feel is better than the stream pole.

Therefore, in general, it is not sure which one is better to use the Table fishing rods and streams. It mainly depends on where fishing and what fish fishing.

1. The working principle of the Bicycle code watch

The principle of the bicycle sheet is that the sensor captures the information brought by the inductive magnet when the car ring rotates, transmits it to the gauge through the sensing line, and the host code table is calculated to calculate the speed, mileage and other information after this process.

Popularly speaking, there is a magnet -like thing on the front wheels. There is a sensor on the front fork. The wheels turn around, and the magnet passes through the sensor once.In the wheel parameters, the code watch has calculated the speed and the journey.To put it simply, the airflow formed during the cycling process to generate induction of the wind hole of the code watch, thereby measuring the speed.

2. What is the reason for the Bicycle code watch

The bicycle codes are not allowed

1. The code table generally has only two keys. The "SET key" in the back is the setting key.Hold down the "SET key" behind the code watch for more than 2 seconds, and enter the setting mode after the screen displays "Set Open".

2. The screen displays "SIZE 2155", where the wheel value is set.Press "Big Key", the screen display "Unit Kmh", that is, the display value is "km/h".

3. Press "Big Key", the screen shows "Dist 0", which is the total mileage.Press "Big Key", the screen displays "time 00:02", that is, time.

4. Press "Big Key", the screen display "Scan OFF", that is, the scroll display mode is turned off.

5. Then go back to the "Time" interface, press the "SET key", the numbers flickered, and set the numbers according to the "Big Key".

6. After the time is adjusted, press the "SET key" again, the screen display "Set OK", and the time settings are successful.

7. Press the "SET key" behind the code watch for more than 2 seconds. The screen displays "SET Close", exit the setting mode, and then press "Big Key" to switch to time and check the setting time.

The average speed of the bicycle codes is not allowed

The biggest reason for the inaccurate speed of the bicycle codes is the incorrect setting of the perimeter of the wheels. Generally, the newly -bought bicycle sheet wheels need to be set. You need to accurately measure the size of the car, and then the code watch parameters follow the car circle according to the car circle.Settings.

The highest speed of the Bicycle code watch is not allowed

There are many reasons for the highest speed of the Bicycle code watch, but the reason is basically the same, that is, the wheels of the wheels have vibrated when the magnets of the front wheels pass through the sensor (sanitary Tube) through the code watch, such as overwhelming over the wheel, such as overwriting too much.A pit, a sudden brake, etc., made the magnet shake near the sensor of the code watch, so that the code watch thought that in this shaking time, the front wheels had turned around, so that there would be a very high high.Speed and recorded, this is normal, don't care.

1. What are the fabrics of outdoor down jackets

1. waterproof coating (membrane) fabric

This kind of fabric is a bit similar to the assault fabric and has the performance of waterproof and humidity. It is generally used in high -mountain down jackets.But the difference is that the fabric will be lighter and softer than the fabric of the jacket.In addition, because down jackets are generally used in cold environments, they are mainly targeted at the melting water of solid water in ice and snow. Therefore, the requirements of the water resistance of the fabric will not be as high as the jacket.Glossom.

2. High -density waterproof fabric

The density of the fabric itself is very high, generally above 290T.Then use the high temperature to fuse the surface fabric to reduce the post -processing process of the gap of the fabric to improve the resistance.The lightness and softness of the fabric are the highest among all down jacket fabrics, while at the same time, it has windproof, water -proof and breathable performance.

3. Ordinary woven fabric

Ordinary woven fabrics and anti -velvet cloths are generally used with low density nylon or polyester. When making down jackets, anti -velvet cloths are added to the fabric, which can play a role in anti -velvet.The disadvantage is that the anti -velvet cloth affects the softness of the down jacket and increases the weight of the whole clothes.

2. How to choose outdoor down jackets

1. Fatty types

At present, the down jackets sold on the market have goose down, duck down, and duck pills and feathers mixed.The warmth of goose down is the best. The secondary duck hair, the worst of mixed feathers (usually we do not buy this mixed feathers down jacket in outdoor activities).Duck down jackets have a certain duck flavor. If you are allergic or disgusted with duck down, you can buy goose down. There is no smell of goose down.

2. Fill

This is the hard indicator of down jackets and an important parameter for the warm effect of down jackets.Generally speaking, users with low altitude climbing or basic snow mountain climbing do not have to buy a lot of charging velvet. Generally, they can be used as a suplodes or duck down with a volume of about 120g.If you go to the northeast or high altitude blood line activity in winter, the requirements for charging volume are relatively high, especially under high -altitude snow line activities, many down jackets use a conjoined situation for shrinking.At this time, the charging volume must be selected according to the temperature at that time.

3, fluffy

The fluffyness is a universal indicator used to measure the warmth of down jackets internationally. It refers to the value of the volume cubic inch of the volume without any external force under certain conditions.The space of the ode is 600 cubic inch, which is called the fluffyness of the down.In the case of a small amount of charging, the higher the number of puffs, the better the warmth performance.Because the higher the fluffyness, the more thermal insulation air contains, the better the thermal insulation performance, that is, it has better warmth.The general price of down jacket is about 450-500, and the slightly higher down jacket, the fluffyness can reach 600-900.

4, down jacket material

There is a down jacket to keep warm. To maintain the body temperature of the down jacket, you must eliminate the communication with the cold air from the outside world. Therefore, the windproofness of the down jacket must be done.Wind irrigation into it will affect the actual warmth effect.There are also some down jackets in the extremely cold area that may add plush to reduce temperature communication inside and outside the down jacket.In addition to windproof treatment, the basic waterproofness of down jackets cannot be ignored in the case of changing Outdoor environments. If the down is drooling due to wetness, the down thermal insulation effect is indexed.Therefore, the waterproof of outdoor down jackets cannot be underestimated.

3. How much is Outdoor down jacket?

The price range of outdoor down jackets is roughly between hundreds and thousands of yuan, and the specific price depends on factors such as brands, materials, design and functions.

Different brands and styles of outdoor down jackets are relatively different.For example, the price of outdoor down jackets of high -end brands is usually between 2,000 and 10,000 yuan, while some cost -effective Outdoor down jacket brands are less than 1,000 yuan.

Factors affecting outdoor down jackets include brands, materials, design and functions.High -end brands of down jackets usually use high -quality goose down or duck down. The design also pays more attention to thermal and functional, so the price is higher.Some cost -effective brands provide options with more affordable prices through optimization costs and design.

1. The service life of table tennis shoes

The life of table tennis shoes will be affected by various factors, including frequency, venue conditions, shoes quality, and personal playing habits.

Under normal circumstances, the average life of a pair of table tennis shoes is about one year.This is because the instability of table tennis caused the shoes to continue to jump left and right, which may cause loss.However, if the shoes are excellent, the production process is fine, and the golfers can properly maintain and rotate, the life of table tennis shoes may be longer.

In order to extend the service life of table tennis shoes, regular inspections and cleaning shoes are recommended to avoid use under harsh field conditions and appropriate rotation to avoid the same pair of shoes for too long.

2. How to wash table tennis shoes

The previous article has simply understood the regular cleaning shoes, which can extend the service life of table tennis shoes. So how to clean the specific table tennis shoes?

In terms of cleaning, for how to clean the table tennis shoes, it is recommended that you use a soft hair toothbrush to gently brush lightly. The time should not be too long. After brushing, you should use warm water or cold water in timeTime.

After washing, wipe the remaining water immediately with a dry rag. If the cleaning shoes are visible to the air cushion, the water around the air cushion is cleaned after the above processes are completed, so as not to make some glue that can be decomposed by some water time in the water time.Chemical changes cause gum.

If possible, use a toothpick to remove the small stone that is sandwiched during walking in the soles of the shoe. Because it is pinched for a long time, it will deform the soles of the shoe, which will affect the braking performance of the shoe to a certain extent.

3. Introduction to the maintenance method of table tennis shoes

1. clean in time after use:table tennis shoes should be wiped in time after exercise to wipe the upper and soles with a wet cloth, and sweat and dustclean and place it in a ventilated place.

2. clean regularly:Regular (one to two weeks) use professional shoes cleaner to completely clean table tennis shoes, do not use alkaliclean the shoes with a strong or acidic cleaner, which will damage the material of the shoes.

3. clean the clear frictional surface:The frictional surface of table tennis shoes is easily contaminated by dust. It should be used with clean wet cloth orThe toothbrush cleans the dust of the frictional surface.

4. Regular maintenance:After using table tennis shoes for a while, the shoes should be maintained regularly. You can use professional shoes.maintenance oil or shoe protective agents are treated to keep the shoes bright and soft.

5. Pay attention when storing:table tennis shoes should be avoided in the sun and high -temperature environment when storing, which will damageThe soles and upper materials of the shoes are best placed in a cool and ventilated place.

1. How to install Camping carts

Camping trains are one of the popular Outdoor equipment in recent years. It can not only easily carry various Camping supplies, but also easily drive in the complex terrain in the wild.The Camping carts bought are generally not installed, so how to install Camping carts?

1. Expand the frame and flatten the frame

2. Put it in the car pocket and start tied to Tirarax (focus): Just tie the activity skeleton, do not tie the middle skeleton to avoid affecting the folding function.

3. Fix the car pocket and fit the magic stickers at both ends of the car with the frame.

4. Turn the car pocket with the four Japanese characters on the frame.

5. The installation is complete!

Note: The installation method of Camping carts of different brands may be different. Generally, there are installation instructions in the products, followed by steps.

2. How to clean the Camping cart

The previous article has briefly learned about the installation of Camping carts, and then let's take a look at how to clean the Camping cart.

Generally speaking, the cleaning of Camping carts is divided into two steps, cleaning car pockets and cleaning frames:

1. When cleaning the car, use water temperature below 30 , do not use a bleach.

2. When cleaning the frame, you can use only neutral cleaner and warm water. Do not use a bleach.

3. How to maintain Camping carts

1. Check your cart at any time and replace or repair loose and wear parts, shed materials or car gaps at any time.

1. Excessive exposure to the sun can easily lead to aging or deformation of the cart, so the cart cannot be placed under the sun for a long time.

3. This product is moisture or rain, please drain the cart, and then store it after drying.