1. How long can the Underwater propeller battery be used?

Underwater pusher uses lithium batteries.Because lithium batteries have the advantages of small size, light weight, high energy density, long service life, no memory effect, environmental protection, safety and reliability, etc., so far they can use one of the most widely used battery products on military and civilian products.So how long can the Underwater pusher battery be used?

The lithium battery of the Underwater propeller is generally about two years. Lithium batteries are mainly based on aluminum alloy materials and batteries using non -hydraulic solution.Therefore, when used, if the lithium battery is often full of electricity, the lithium inside runs to the negative electrode in the battery, which cumulates too much to cause the crystal phenomenon of the negative version, thereby reducing the battery capacity of the lithium battery.Basically, it is equivalent to shortening the life of the battery.

2. How to change the battery Underwater propeller

The previous article has briefly understood how long the Underwater pusher battery can be used, and then let's take a look at how to change the battery Underwater pusher!

1. Turn off the power switch of the Underwater pusher.

2. Open the battery warehouse cover of the Underwater pusher and remove the old battery.

3. Put the new battery in the battery warehouse.

4. Close the battery warehouse cover to ensure the seal.

5. Connect the power cord, turn on the power switch, and check whether the battery works properly.

PS: (When replacing the battery, please ensure that the battery contact and battery compartment battery contacts are dry and clean in the dry environment.)

Men's sports jacket match

Match1TheBlack and white two -color shoulder Baseball jacketPlaid shirtTreasure blue round neck sweaterGray sports pantsTreasure blue sneakers.

Match2TheBlack sports jacketWhite shirtBlack jeansshoes.

Match3TheBlue and white shoulder Baseball jacketRed white wave dot shirtKhaki Casual pantsRed high -top shoes.

Men's sports jacket with pictures

Match4TheDeep blue rice white shoulder Baseball jacketGray round neck sweaterBlue jeansCamel flat shoes.

Match5TheInk green gray two -color shoulder -in -shoulder Baseball jacketBlue denim shirtGray cropped pantsBrown leather shoes.

Ladies sports jacket with pictures

Ladies sports jacket match

Match1TheWhiteTShirtjeansGreen badge Baseball uniformBlack Roman nude boots.

Match2TheGray sweaterjeansContrasting colorful Baseball uniformWhite sneakersInk green suede shoulder bag.

Match3TheGray long SleeveBlack leather skirtWhite Baseball uniformPrint lace shoes.

Match4TheWhite topBlack leather skirtBlack thick bottom high heelWood -grain Baseball uniform.

Ladies sports jacket with pictures

Match5TheWhite sweaterMilk white hole pantsBlack Baseball uniformBlack sneakers.

Match 6:Dark gray sweaterDark gray slit skirtBlack naked bootsBlack sports jacket.

1. The working principle of GPS code watch

The GPS code table is a satellite positioning system, such as one or more of GPS/GLONASS/Beidou/Galileo. After receiving the sky satellite signal, the speed, distance, time, and height data are calculated., Power data.Finally, the intuitive and rich cycling data is obtained.

Almost all GPS code tables use the US GPS positioning system, but some code -watch manufacturers combine the advantages of GPS and other positioning systems to send a double -star positioning function.

2. The purpose of the GPS code table

The GPS code can display riding data such as distance, speed, altitude, temperature, heart rate, step frequency, and some very practical small functions, such as automatic backlight, automatic registered circle, line navigation, etc.

1. Heart rate monitoring: Heart rate monitoring Belt a sensor of the biological electrical signal (ECG signal) generated by myocardial excitement during the heart activity of the heart.

2. Step frequency records: Piece sensors are used to calculate the sensors that people step on the number of people per minute during cycling.The unit is: turn/minute.Installed on a bicycle or a crank after the bicycle.

3. Power records: The power meter is installed in the rear wheels, plates, cracks, pedals, or middle shafts. It can calculate how much sensors do people do in real time during cycling.

4. Automatic backlight: After GPS positioning, get position coordinates to obtain local sunrise and sunset time.Turn off the backlight an hour after the sunrise; turn on the backlight an hour before sunset.

5. Automatic regulation: It is divided into two types: distance measurement circle and location. When the distance is meter, a fixed distance is set. After the ride completes a fixed distance, it can be calculated.After the position is planned to move to the position where the circle point is located, it is suitable for ride around the circle.

6. Line navigation: Analyze history or plan riding data generation road books, providing precise navigation and returning flights.

Because each brand has different ideas and layouts of product design, the above points do not represent the functional attributes of all brand products.

Third, the GPS code table is better or ordinary code table

1. record principle

The GPS code watch uses a single and multiple satellite positioning systems for positioning, and then analyzes and shows through the GPS module in the code watch, and records various cycling data.

The traditional code table is to complete the record through the magnetic head induction.

2. Data function

The cycling data recorded by the GPS code can be as many as dozens of items, and it can be uploaded to the back -end websites of each GPS code watch brand or connected to the mobile phone APP for data analysis and data sharing.

The data that can be displayed by traditional code tables is limited, and data cannot be analyzed and shared.Many times you often need to take pictures manually to share sexual data sharing.

3. External device connection

The GPS code can be obtained with more comprehensive and rich cycling information through ANT link external devices, such as heart rate bands, stepping device, power meter, etc.

Traditional code tables can only be restricted. Except for a small number of high -end traditional code tables that can connect to the tramotor and heart rate band, other external equipment cannot be connected.

4. Convenience

The GPS code watch is simple to operate, and there is no need to set the step diameter and other steps. You can install it by installing the bottom of the gauge or extending the bracket.If there are multiple bases and brackets, a GPS code can be used for multiple vehicles.

The operation of traditional code tables is cumbersome, especially the wired code watch is called a technician killer. The aesthetics and convenience are deducted.

5. Power consumption and price

Rider who insists on using traditional bicycle giameters will use power consumption and price as an important factor in choice.A button battery of a traditional code watch can usually endure tens of thousands of kilometers, while the purchase price is only hundreds of yuan.The GPS code is limited by power consumption. In the case of low power consumption, it can only be battery life for 20-30 hours, and the price is often from several hundred yuan to thousands of yuan.However, in fact, this is a question of wise wisdom, and demand and purse determine everything.

1. Vine furnitureWhat are the characteristics

rattan furniture has the characteristics of elegant color, clean and cool, light and lingering.Whether it is indoors or gardens, it can give people a strong rustic atmosphere and light and elegant taste.The vine material is extremely soft when it is full of water, and it is particularly tough after drying.As people's environmental consciousness gradually enhances and returns to nature, various vine and green craft products have begun to enter millions of households, becoming a new round of home decoration fashion.Vine furniture has gradually been favored by consumers with its quaint and refreshing characteristics.

2. 5 major maintenance methods of rattan furniture

1. Require insulation

The rattan family has the division of imitation rattan and natural rattan.Imitation vine furniture is easier to maintain.What you need to pay attention to usually is to be isolated from the heat source. We all know that it is easy to soften at high temperatures in imitation vine furniture materials.Isn't our rattan furniture lost the beautiful appearance?It is also worth mentioning that imitation rattan furniture is not stronger than natural rattan furniture. Be careful not to be scratched by hard objects, affecting beauty.

3. Direct sun exposure

Natural rattan furniture maintenance requires us to scrub it regularly, and salt water is the best!Not only can the dirt removing dirt, but also the soft rattan is soft and not hard.At the same time, avoid the sunlight to the rattan furniture, and the fading can make the rattan furniture look good.So the maintenance of rattan furniture is well maintained, and is you afraid that the furniture will be eliminated?

4. Don't touch the water

The details of the maintenance of rattan furniture cannot be ignored. We can all notice that the skeleton of some rattan furniture is made of metal.What does this mean?That is, we usually do not use water and metal parts directly to the maintenance of rattan furniture.Once the skeleton is oxidized and corroded, the service life of rattan furniture will be greatly reduced.

5. No detergent

Many housewives use washing products as auxiliary rattan furniture, in fact, this is a big misunderstanding.The rattan furniture is cleaned with salt water.Especially brushing, it hurts rattan with rattan furniture.This is very important for the maintenance of natural rattan furniture, and pay attention to future life.

6. Apply wax to prevent discoloration

The ratio of rattan has a characteristic that the longer the use time, the brighter it is.When the surface of the rattan furniture is dusty, we just need to gently brush it with the feathers. For stubborn stains, wipe the rag with water.After making white rattan furniture, remember to apply a little wax after making a large cleaning, which is very effective to prevent rattan furniture.

Losing weight yoga thin waist action

1. Wind blowing tree style

Method: Stand, open your feet with the same width as the shoulders, and the ten fingers are intertwined.Inhale, turn your palms on your chest, and your arms lead the spine upwards.Exhale, bend the spine on the right, and the arm stretches with it.Inhale, reply to the middle.Exhale, bend the spine on the left, and the arms stretch with it.The above is a group, which can be repeated 4 ~ 6 groups.

Efficacy: reshape the muscle lines of the waist, strong digestion and absorption system, which can inhibit fat accumulation between the waist and abdomen.

2. Back rotation

Method: Stand, open your feet with the same width as the shoulders, and the ten fingers are intertwined.Inhale, turn your palms on your chest, and stretch your arms upwards.Exhale, lean forward from your waist, go forward, until the back of the waist and arm is parallel to the ground.After inhalation, exhale, and the arm leads the spine to the right level to reverse 90 degrees.Inhale, reply to the middle.Exhale, in the opposite direction, the same.Can be repeated 4 ~ 6 groups.

Efficacy: Promote intestinal peristalsis, clean up toxins in the body, and consume excess fat on the side waist.

3. Spinal twist

Method: Sit position, bend your knees, your left leg up, your right legs down.The right heel is placed on the outside of the left hip, and the left foot is stepped on the outside of the right knee.The right elbow is outside the left knee joint, and the left arm is wrapped around the right waist from the back.Inhale, the spine stretchs upwards.Exhale, fully twist to the left and rear.Inhale, reply to the middle.Exhale, let go of your limbs.In the same way.

Efficacy: Massage all internal organs, regulate the normal endocrine and digestive system, and improve the phenomenon of fat deposits in the body.

4. Side extension posture

Method: stand upright, take a big step forward with your right leg, turn your left foot 45 degrees outwards, so that your right knee and right foot toes are on a horizontal line to press down the body as much as possible, so that the right thigh and the ground are parallel.Bend your body, put your right palm behind the right foot, and hold on the ground.When you try to stretch your left arm as much as possible, keep your right thighs and the ground parallel.Try to stretch your arms and do not hump to expand your chest.

Efficacy: exercise the entire back, leg muscles, hip muscles, abdomen and lumbar muscles.

5. Snake twist

Method: lying down, open your feet with the same shoulders, flex the elbow, and place your hands on the ground on both sides of the chest.Inhale, push the ground, and stretch the spine upwards.Exhale, flexion after the spine.After inhaling, exhale, twist the spine to the right and rear, and look at the left heel.Inhale, turn back to the middle.Exhale, in the opposite direction.4 ~ 6 groups can be repeated.

Efficacy: Reduce excess fat on the back and hip hips.This style can also strengthen the kidneys, which can completely metabolize the toxins in the body and eliminate edema of the lower limbs.

6. Locust style

Method: lying down, open the same shoulder width of your feet, the arms are about two punch with your body from the body.Inhale, lift your limbs and your body as much as possible, and the hands and feet are the same as possible.Keep your breath even for a while.Exhale, the whole body falls to the ground, relax.4 ~ 6 groups can be repeated.

6 Bastable leg yoga action

Thin leg yoga action -half lotus spine twist type

practice:

1. Sit stand, straighten your legs forward, bend your left leg on your right thigh, and your feet facing up.

2. Exhale, extend your left arm forward, grab your right toe with your left hand, turn your upper body to the right, put your right arm towards the back, and hold your right hand to hold the left side of the waist.

3. Inhale, then exhale, at the same time turn the head and upper torso as much as possible to the right, keep it naturally breathe naturally, and change to the other side.

Thin leg yoga action -triangular rotation type

practice:

1. Stand naturally and separate your feet wide.Inhale deeply, raise your arms parallel to the ground, straighten your knees, turn your right foot to the right ninety degrees, and turn your left foot to 60 degrees.

2. Exhale, turn the upper body left, bend the torso down, and place your right hand between your feet.The right arm and the left arm are vertical, and your eyes look at your left finger.

3. Stretch your shoulders and scapula for 10-30 seconds.Inhale, first close your hands, then the torso, and retract your two feet.Then change the direction.

Note: The time to maintain on both sides should be consistent.

Thin leg yoga action -cat bow back type

practice:

1. Kneel down, sit on the back of the hips, keep your upper body upright, place your hands on your legs naturally, and relax your shoulders and arms.

2. Raise your hips, kneel your knees, and have both hands and shoulders with width to support the ground.

3. Inhale, raise your head, collapse your waist, collapse, and your hips up.Keep 5 to 10 seconds.

4. Exhale, bow your head, the spine is bow -shaped, arch back, keep it for 5-10 seconds.

Note: Repeat 5-10 times and relax.

Thin leg yoga action -fish style

practice:

1. Lie flat, straighten your legs together.

2. Inhale, arch the back, lift your body torso away from the ground, top your chest, raise your head, and gently let the top of the head close to the ground.

3. Straighten your arms, hold ten, and lift your feet away from the ground at the same time.

Thin leg yoga action -side corner stretch type

practice:

1. Stand the facade to the front, the legs are separated as much as possible, the hands are raised as high as the shoulders, and the palms are down.Open the right foot 90 degrees, retract 30 degrees with your left foot, exhale, bend your right knee, your thighs are parallel to the ground, and your left knee straight.

2. Low your right arm along the inside of the right leg and place your hands on the inside of the feet.Turn your face upwards, stretch your left arm towards the front of the head, and put the upper arm to the temple part.

3. Keep for 30 to 60 seconds, breathe steadily, get up inhaled, and repeat the other side.

Note: Concentrate to stretch back and spine.Stretch the chest up and behind, and finally form a straight line on the chest, hip, and arms.

Stovepipe yogaAction -Simplify spine twisting practice

1. Sit stand and straighten your legs.Both hands are placed flat on the ground, slightly behind the hips, the finger of both hands out, move the left hand over your legs, and put it in front of the right hand.

2. Put your left foot on the outside of the right knee, further extend the right palm to the back, inhale, try to turn your head to the right, so as to twist the spine.

3. Don't exhale, keep this posture for several seconds.Exhale, turn the torso back to place.Change on the other side.

Note: Don't bend your back.