[Lifetime clothing material] What are the detailed explanations of life -saving clothing materials

Safe clothes are a kind of clothing of life. The design is similar to a vest. The general use period is 5-7 years. It is one of the life-saving equipment on board and airplanes.What kind of life clothes are good?The CCAR.TSO-C13F regulations make the life jacket made of internationally universal PU tape.Suitable for water life.

Made of nylon fabric or neoprene, buoyantic material or inflatable materials, reflective materials, etc.Generally, it is made of foam plastic or cork.Putting on the body has enough buoyancy to make the water falling from the water.

What are the life jacket materials

1. Filling -type life jacket, that is, use nylon or chlorine rubber as fabrics, fill the buoyancy material in the middle.

2. Inflatable life jacket: It is made of high -intensity Waterproof material, similar to the principle of inflatable life -like life or swimming rings.Automatic inflatable or passive filling.However, this kind of life jacket should pay attention to: absolutely avoid sharp objects to piercing or grinding the waterproof layer. After leakage, it will cause serious consequences of unimaginable imagination.

How to use the life jacket

Ordinary life jacket wearing method:

1. Put the life jacket on the neck and place the rectangular buoyancy bag in front of you; tie the neckline band.

2. Pass the left and right bands through the buckle bands on the left and right sides, and cross the back;

3. Pass the band through the buckle rings on the chest and hit the knot.

Notice:

1. Check whether the life jacket is broken before wearing, and check the device and gas cylinder in inflatable life jacket

2. Some life jackets are equipped with a reflective film on one side. If you wear the reflective film in it, you will not play a role.

3. To kill the strap, so as not to be shocked during diving or loosened for a long time.

Manual inflatable life clothing wearing method:

1. Put your head into the life jacket;

2. Tie the band on the left and right sides;

3. Pull the tension on the left and right sides, the inflatable valve is opened, and the life jacket is inflated within a few seconds.The manual inflatable life jacket on the plane also has a variety of equipment: the power supply of the orientation indicator is activated by seawater, and the power supply time can exceed 12 hours; some also include whistle, mirror, etc.

1. Close Yang is too suitable for raising

1. Close South Bowl

Closed to the South Bowl, at least 6-8 hours of light in the day. Although the glass blocks some of the ultraviolet rays, it is generally a better flower place.Leaf flowers and fruit pots.

Recommended flowers 1: Dwarf Model

Stepping on the seedling period, you can hang up better, and apply fishy water once a week.

Recommended flowers 2: Geranium

It is easy to raise, do not water without drying, cut it back in autumn, control the plant shape, and promote the germination of the side buds.

Recommended flowers 3: Margaret

I have been topping the top since the seedling period, staying with two, turn around once a week, and apply Compound fertilizer once a week.

Recommended flowers 4: Little hibiscus

If you want to bloom more, apply more Fertilizer, and apply water to Compound fertilizer 1-2 times a month.Promote more to promote side buds.

Recommended flowers 5: blue snowflakes

Water in the spring and summer growth season, keep the pot soil moist, control the water in autumn and winter, do not dry it, and the exposure is prohibited in summer.

Recommended flowers 6: dry Jinlian

Sowing with seeds, the soil is not high, water is water, keeps the pot soil moisturizing, and enters the room in winter.

Recommended flowers 7: fleshy meat

Drought tolerance and waterlogging and waterlogging, pour once a week in the spring and autumn, and pour 1-2 times a month in summer and winter. There are more soil particles.

Recommended flowers 8: alum root

Try to expose it to the sun as much as possible. Watering is not dried or poured. You can usually apply nitrogen fertilizer.

Recommended flowers 9: Net -patterned grass

It is not cold, move into the room in winter, watering cannot be too dry or dry, and keeps the pot surface slightly moisturized.

Recommended flowers 10: Five fruit

Drought resistance, the pot soil is dry and then watered. If you want more results, you can apply more phosphorus and Potassium fertilizer.

2,Close East Balcony

Closing the east balcony will have about 4 hours of light in the morning, which is suitable for planting some short -day flowers and green plants.

Recommended flowers 1: hydrangea flower

Keep the pot soil moist in spring, summer, autumn, especially in summer, and keep the pot soil slightly dry in winter.

Recommended flowers 2: longevity flower

During the growing period, we have more top -up and topping, and more flowers will be blossomed.

Recommended flowers 3: Cameron comes

Wish water, when you see the flowers or leaves, you have a little pouring and wilting, quickly water the water, and water the leaves.

Recommended flowers 4: Rhododendron

Afraid of waterlogging, you usually see the pot soil white and then water it. The soil should be loose.

Recommended flowers 5: Horned

Sowing in the northern spring, sancing in the south in the south, the seeds gradually see light after germination, nitrogen fertilizer, and phosphorus and Potassium fertilizer before pregnancy.

Recommended flowers 6: Ball orchid

Drought resistance and yin and are good. Put it once 1-2 weeks. Usually spray water on the leaf surface.

Recommended flowers 7: Fortune Tree

It is better not to be wet. Most of the wealthy trees are poured. The soil surface can be poured 3 cm.

Recommended flowers 8: Clivia

I like the astigmatism environment, the pot soil is not dried or poured, and the Fertilizer can be poured once in 2 weeks.

3. Close West Balcony

The west balcony is the same as the east balcony. It can only be illuminated by about 4 hours in the afternoon. It can only raise some short -day flowers and some green plants.

Recommended flowers 1: Crab Claw Orchid

Drought resistance, do not dry the pot soil, and during the budding period of autumn, you can spray potassium dihydrogen hydrogen hydrogen hydrogen in the leaf surface. Do not move frequently after flowering.

Recommended flowers 2: Lig Begonia

The pot soil is not dried or poured. The long Fertilizer should keep up with the water, and pour water-soluble Compound fertilizer once 1-2 weeks.

Recommended flowers 3: Fengxianhua

Use peat soil to mix some peak rock species, add some chicken manure for bottom Fertilizer.I don't like big water, soil is dried before pouring.

Recommended flowers 4: Dayan Tong

Do not be lower than 5 degrees, keep the soil slightly moist, do not accumulate water.Tooling during the growth period.

Recommended flowers 5: spiderland

Pour water once a week, pour it once every 2 weeks in winter, and sprinkle a few capsules in the water or basin noodles per month.

Recommended flowers 6: white palm

Do not expose it, keep the pot soil moist, and generally have better hydroponics.

Recommended flowers 7: Tigerpilan

Drought resistance, do not water too much, soil is so dry and watering, and sand is mixed with sand in the soil.

Recommended flowers 8: Luo Luo

Green Luo is maintained on the west balcony, and it will grow faster to accept certain light. Watering 1-2 times a week.

4. Close North Balcony

There is basically no direct light in the North Balcony, only a small amount of scattered light, so it is basically not suitable for planting flowers, but it is very suitable for the growth of some yin -resistant green plants.

Recommended flowers 1: Turtle back bamboo

Like wet, watering 1-2 times in spring, summer and autumn, and pouring once every 2 weeks in winter.

Recommended flowers 2: Hi Yinhua

It is especially durable. Watering once in one week in spring and autumn, watering 2-3 times in the summer, and once every 2 weeks in winter.

Recommended flowers 3: Hanging bamboo plum

I like cool and humid. Watering 2-3 times a week in spring, summer and autumn, and 1-2 weeks in winter.

Recommended flowers 4: Dragon Blood Tree

Do not wet, water it 2-3 times a month.

Recommended flowers 5: Douban green

I like wet but not too much watering, and water when the pot is very light.

Recommended flowers 6: rubber tree

Drought resistance and yin and yin, dry the surface of the pot soil, and then water it before watering.

Second, balcony flower breeding skills

1. According to the characteristics of the high -rise balcony, you should choose a variety of grasses and drought tolerance.For example, the long -flowering period flowers, jasmine, pomegranate flowers, cactus; golden orange, four seasons of citrus.You can also plant herbal flowers such as chrysanthemums, phoenix flowers, cocks, stone bamboo, and big chrysanthemums.This can make the balcony flowers in the four seasons.Some like -yin flowers can be cultivated indoors or small or small windows.

2. For balconies of different orientations, different varieties of flowers should be selected.In order to block the day of the east -west direction, the heat insulation cools down, and some vine flowers can be planted, such as gold and silver flowers, Changtang vines, and glory flowers.analogy.On the balcony in the north, it is advisable to be intended, such as Tianzhu, Tiger Strang, Wannian, Jade and so on.

3, balcony to grow flowers, cold and wintering is also very important.Especially for low -temperature chills, such as Milan, Jasmine, bamboo, Fairy, and fruit Plants, such as golden oranges, four seasons citrus, etc., they can not stand the cold below 0 C.Xiangyang.In winter, plants are in a state of dormant and semi -dormant, and they grow slowly. Watering should be controlled. Generally, watering once every 3-5 days can be used. Watering water is used for water. It is best to store it in the room for a day or two.Pour.Winning in winter should be watered in the morning.

3. precautions for Balcony flowers

1. Water humidity management. Due to the good ventilation conditions of the balcony, it is difficult to enter the rain when it rains. It is difficult for flowers to get natural rainwater and dry air, so watering is the key.Pay attention to watering and spraying water on the leaves and ground.The Flower pots should be large, because there are more soil, water storage is more, and it is not easy to dry, or put the Flower pot into a shallow water basin. The water can be continuously supplied by the need for flowers due to capillary Tube.You can also put a pot of water around the flowers to make it evaporate naturally and improve local climate.The Potted flowers on the balcony should pay attention to appropriate density, slightly dense, because more pots of flowers evaporate water can increase the humidity of the surrounding air.

2. Light management, the orientation of the balcony is very important, not all the balconies will have a good sunlight.The sufficient sunshine is conducive to the photosynthetic effect of flowers, but some flowers and plants should not be exposed to the sun, which can be placed behind the large -planted flowers, or moved to the shade and indoors.When the light is too strong, it can be covered with wet grass, moss, etc. on the surface of the pot soil to protect the roots on the surface of the pot soil.summer shadowing nets to prevent the sun exposure.

1. How to check the authenticity under the banana

The steps of the authenticity of the banana are as follows:

1. Search for "Bananunder" and "Beneunder Offline Mall", which is the two official public accounts under the banana.

2. Pocket or tag under the banana, scrape the official anti -counterfeiting code.

3. You can see 16 digits and enter the official public number verification, which can show whether it is genuine and query.

4. Enter 16 digits to query the authenticity of the product.

In addition, after scanning the anti -counterfeit code, it was found that although the display is genuine, there are many query records. For this situation, a banana agent said: "It may be that the anti -counterfeit code is overlapped, or the system fails to query the system, as long as it is displayed." But we still have to be vigilant.

2. What are the ways to distinguish between authenticity under bananas?

When we suspect the authenticity of the banana products purchased, we can identify through the following aspects:

1. View after -sales service card:The after -sales service card of the banana umbrella is made of matte material. The color will be shiny and distributed well. The fake after -sales card paper is relatively Smooth and the color is dull.

2. Appearance check:The appearance of the genuine banana is neatly planned, the texture is very soft, and it has good breathability.It is quite suspicious if the product has odor, rough materials, or lack of sewing.

3. UV inspection:You can use the UV -function instrument for identification.Flowing sunscreen products can effectively prevent ultraviolet rays, while fakes have no effect.

4. Packaging check:There are obvious brand logos on the packaging of genuine banana sunscreen products, and the information on the packaging should be consistent with the actual information of the product.If the logo on the packaging is not clear or the information is not matched, it may be counterfeit.Banana products & gt; & gt;

1. Strong light probe Lights do not light up for maintenance method

Detective Lights are a very easy -to -use Tool when traveling outdoors. It can be manipulated or worn on the head to provide long -range lighting effects. However, sometimes due to the quality of the detection Lights or improper use, the probation Lights fail.In the case, how can I repair the strong light probe?

The structure of the probe lamp is relatively simple, including a switch, the battery placement position and the lamp head of the back of the rear. During maintenance, we can use a small cross screw knife to check the fault one by one and repair:

1. First of all, see if it is a switch or where the contact is poor. If the switch is pressed repeatedly, there is no shiny trace of the lamp beads, which means that it is not a problem of poor contact.

2. Open the battery placement in the back, change the battery, see if it is the problem of the battery or there is no charging.

3. After excluding the above reasons, the rest is the failure caused by the internal line. This needs to be removed and repaired. The specific method is to hold the light head in the right hand, rotate the lamp head in the counterThe connection point of the circuit and the circuit board of the light line and the light head, if it is intact, exclude the possibility of some lines of the lamp head; if there is a problem, connect the line, and the specific method isCome down, expose a long section of metal wire, and wrap the metal wire to the disconnected battery base metal piece, and tighten it.

4. Then put the lamp head back, insert the cross screw knife to the place where the lamp head and the rear part are connected, hold the other end of the screw, rotate the cross screw knife against the right hand, you can twist the screws.Part of the stuck place separate, and then use a screwdriver to remove the two screws of the battery installation position. See if the line between the metal sheet of the battery base and the lamp head is broken. If it is broken, the maintenance method is the same as the step 3.

Tips:When disassembling the battery base, gently separate to prevent too much force from the wire head and the wire between the battery directly. After the line is connected, do not rush to load it back. Try the fault to eliminate it.

2. What are the precautions for the use of the viewing light?

The use of the exploration Lights is limited. In order to facilitate use and avoid failure, we must pay attention to maintaining and maintained strong light probe Lights during use:

1. In the case of long -term use, it must be charged once every three months to keep the internal current Running.

2. Although the probe light has certain protection performance, after all, it is an electronic product. Usually use it away from the water source to prevent short circuit circuit.

3. Do not frequently press the switch when using the probe light to prevent the lamp beads from being broken.

4. Do not wait until the electricity is completed after the electricity is used to avoid loss.

[Smooth Clover] The advantages of the role of Shading on the roof

When it comes to shutters, it is easy to think of high -tech buildings exposed to structures, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The characteristics and advantages of the roof Shading of louver

The roof Shading louver is mainly used for regulating the sun, and it is a very important decorative component on the top of the building.Blossoms are on the top: Blossom as a form of roof.The roof is pretty better.

When it comes to shutter, it is easy to think of those high -tech buildings that expose the structure, mechanical and electrical parts, and talk about the relationship between architecture and structure.The louver is expanded in a horizontal way, and the level of the louver group is expanded: the facade factor of the building constitutes a pure horizontal line.The staggered arrangement of the Closs Group: There are such louver layout in residential and public construction.Make the facade lively and angry.The vertical expansion of the shutter group: The louver group is unfolded in the vertical direction to form a tall vertical line.

According to the requirements of different environments, sunshade louver is used to limit the effects of direct radiation, scattered radiation, and environmental surface reflection radiation on indoor temperature and light through the design of different environments.

The shutters are relatively wide, which are generally used for indoor and Outdoor Shading and ventilation.Now more and more people's recognition of the shutters have also evolved from the shutters.Blossom curtain wall has many functions, and it is very beautiful. It is generally used in high -rise buildings.The Shading louver curtain has good ventilation and ventilation and breathable indoor light intensity, especially suitable for simple and bright indoor space.Plastic aluminum shutters are favored by consumers because they are not easy to fade, do not deform, and have good thermal insulation.

The advantage of the new type of Shading louver is that when the shaft is rotated, the rotation of the flip wheel fixed on it, thereby driving the leaves of the louver window to rotate. Because the turning wheel is limited by the two directions of the base, the leaves of the louver window are not rotated after rotating in place to avoidThe leaves are over -turned over.The structure of the entire blade flip mechanism is simple and easy to make.

The role of the roof Shading louver:

1. Shading, lighting, Shading and energy, cooling, energy saving, environmental protection.

2. Comfortability: comfortable body sensation, comfortable temperature, visual comfort, adaptation comfort; decorative; privacy; protective effect on the surface of the building.

Character characteristics:

1. Good rotation light and visual enjoyment of modern flow sense;

2. The surface of the blades is bright, the edge is designed, and the Shading rate is as high as 98%;

3. Wide moisture -proof is not moldy and can be placed in a humid environment;

4. Made of anti -UV material, indoor energy conservation is more effective;

5. Do not contain formaldehyde, waterproof and insulation, do not help, do not refund, and do not deform heat resistance.

Advantages of roof Shading louver:

1. Outside the building shade function: Ventilation shutters can be effectively deducted from the sunlight of the sunlight to indoor radiation energy, which can achieve the effect of reducing room temperature in summer.At the same time, the intensity is good and it is not easy to be destroyed.By adjusting the angle of the opening of ventilation shutters, the indoor can not only control the angle of light, but also increase security. The hidden effect is relatively good.

2. Large buildings high windows, large -scale exhaust: ventilation louver window configuration electric opening equipment can effectively solve the plant.It is difficult to open the window of the location, the requirements for ventilation.When all start (90 degrees) ventilation reaches 99%, excellent ventilation function: It can also be ventilated on rainy days.There is no need to consider the problem of raining or anti -theft after opening the window.Civilized Shading anti -theft, universal types of various places: smoke and ventilation of the plant.The external facades of the building, the setting of typhoons, and the improvement of ventilation settings, the school's protection settings can be through different settings of ventilated shutters.