[Online shoes maintenance] How to clean the net shoes how to brush the net shoes, how to make up for the net shoes

How to clean the surface sports shoes?

How to wash net eye sneakers?sneakersIt is the most common and popular sports shoes.But no matter what shoes, if it is not clean, it will always feel like that.So keeping the shoes clean is the key.But no matter what shoes, you still have to wash it.For example, how to clean the surface sneakers? If the surface shoes are cleaned, it is very convenient to clean it.But be sure to pay attention to one, do not use a plastic brush to brush the surface of the net surface.Because it is used to use a plastic brush, the surface of the mesh will be easily brushed out of the ball and hairy.

As long as you don't need this, how to clean the surface sneakers is really simple.Whether you are washing machines to clean or wash it by hand, it can be said that it is not limited.You can use laundry powder to clean it, or use detergent to clean.Even a few pairs of shoes can be placed in the washing machine together.Because the shoes on the mesh surface are good and are not afraid of stirring.No matter how you wash it.The question of how to wash net sneakers is really not necessary.

However, if it is white or to make the shoe life longer, then you still need to pay more attention.For example, do not use a washing machine when washing.When using a brush, work hard according to different places.Pay attention to maintenance shoes.How can I have so many questions on the question of how to wash the sneakers on the eye?In other words, the sneakers are the best sneakers in the sneakers.And when you wear it, you are the most comfortable, especially in the summer, almost everyone will have a pair of sneakers with mesh eyes.In short, as long as you do not use a hard brush to brush, you can wash it.

How to repair the sneakers?

First of all, if you are purchased in the prescribed regulations, generally within the three packs, you can go to the merchant for free repair. If it is because of the quality of the product itself, it can be repaired for free. If it is because you are personalAs a result, the cost is required.What should I do if I have broken the sports shoe net? If it has passed the three -pack period, you can only take it for yourself or buy a new pair of shoes.

When the shoes have passed three packs, you must find another way.How to repair the sneakers on the mesh? If the mesh is not very large, it is just a slight hair. You can handle it. First, you can cut it with a small scissors.The hair part will be retracted.However, if the hole breaks is relatively large, it will be difficult to see or not handle it if you deal with it yourself. You can get a professional shoes beauty shop sneakers network shoes.It is a professional material and tools and technicians that can be repaired. When repairing, the correct fabric and formation will be selected according to the fabric and characteristics of the shoes.

What should I do if the sports shoes net is broken?

If the sneaker net is broken, it is not the problem of its own quality. Generally, it is a place where the tip is hooked, causing the net to break.How to repair the sneakers? If you can go directly to the merchant to repair it in the three -pack period, you can repair it and continue to wear it. This will not be repaired.However, if the hole is too large or after repair, it will affect the beauty, it is recommended to buy another pair.

1. The name of the name of the bikini Swimsuit

On the hot summer, people like to surf, swim, and cool off the beach.Wearing a sexy bikini Swimsuit beauty is one of the particularly attractive landscapes.So why is a bikini Swimsuit called a bikini Swimsuit?What is the source of the name of the bikini Swimsuit?

The name of the bikini is derived from the bikini Islands of the Marshall Islands in the Magniculia region of the Pacific.bikini Island, located at 11 35 'north latitude, 165 25' east longitude, is a nuclear bomb experimental base in the United States.From 1946 to 1958, the United States conducted a total of 67 explosions of the original bullets and hydrogen bombs in the Marshall Islands. The largest one was on bikini Island.Designer Louis Reald believes that the bold design and appearance in 1946, its influence is tantamount to a nuclear explosion, so it is named "bikini Swimsuit"!

Second, the development history of bikini Swimsuit

As early as 1400 BC, the "bikini" for girls and upper and lower underwear for girls had already appeared.Evidence can be found in the Greek tomb or at that time.

Around 1890, European swimming enthusiasts needed to change the Swimsuit in the locker room on the wheels.The ladies sew the edge of the Swimsuit to prevent clothes from shrinking upwards, revealing their thighs.

The prototype of modern bikini began in 1907.At that time, Australian swimmer Annette Kellerman was arrested on Boston Beach for wearing a "bold" bikini Swimsuit.

In the 1920s, there was one public management measure in the United States at the time that women were prohibited from wearing a 6 -inch Swimsuit with a knee of 6 inches.In 1922, Chicago, USA, a policeman arrested a girl wearing a Swimsuit in a public place.The United States implemented a Swimsuit ban at the time. In addition to the swimming area, women were prohibited from exposing their bodies.

In the 1940s, the war system at that time stimulated the development of Swimsuit. The US government ordered manufacturers to minimize the use of textiles as much as possible, resulting in the naked belly of the girls' clothes.American fashion stores began to sell swimwear.

On July 18, 1946, the bikini designed by French designer Louis Reald to protect the breasts through a bra. The back was almost naked except the rope band.Legs.It has a simple structure, small and exquisite, and the cloth used is less than 30 inches. It can be put into a match box with a ball.The swimming is selected with fabrics printed with newspaper content sections.Because the atomic bomb conducted the first global test explosion on the bikini Island of the Pacific Marshall Islands, the Swimsuit was named a bikini.Put on a bikini under the public.

In the 1950s, bikini was accused by many European media in order to destroy the aesthetic standards for clothing design. Many national governments issued relevant laws and regulations. women are strictly forbidden to wear bikinis in public.

In the early 1960s, the bikini girl appeared on the cover of the American erotic magazine "Playboy" and "sports Pictorial".When in 1962, when the bikini was beaten into the "Cold Palace", Hollywood movie star Marilyn Monroe appeared on various fashion magazines in the movie screens and art photos of bikini.As a result, bikini's status in the fashion industry has a real turn.In the same year, in the 007 series of film "Dr. Nuo", the Swiss actor Usula Andose wore a homemade white bikini from the Lakes of the Caribbean Sea.

In 1964, designer Rudy designed a top -LessSuit without a bra to vent his lust under the pressure of high industrialized society.In the same year, the designer Corner launched a Swimsuit with fishing nets to cover up the front chest and waist. Special materials symbolize the designer's pursuit of nature and freedom.

From 1970 to 1980, no structured bikini came out.The so -called non -structured is that there is almost nothing except the lower body.The emergence of this bikini means swimming without wearing a shirt.

In 1992, Corch discovered that breast enhancement was about to be re -popular, so immediately developed an inflatable Topsecret. This is a bikini with tiny inflatable plugs hidden in the bra. women can use it to use it to use it to use it to use itThe chest is straight and plump.

In 1995, as high -tech materials entered the fashion industry, the design of bikinis became richer. Combined with the retro style, a new and gorgeous bikini appeared, such as bikini with a rhinite.

The evolution of bikinis has not stopped.With the change of the times and the innovation of designers, the style and material of bikini are constantly changing.Today, bikini has become a classic item in the fashion industry, with a variety of styles and colors to choose from.

Although the origin of bikini is related to nuclear bombs, it has come out of that dark era and has become a symbol of beauty and confidence.Regardless of your body shape and age, bikini can show you your beauty and charm.

1. How long can Outdoor power life be used for a few years?

Outdoor power supply is an Outdoor multi -functional power supply with built -in lithium -ion batteries and its own reserve power, also known as a portable cross -current power supply.Outdoor power supply is equivalent to small portable charging stations. It has the characteristics of light weight, high capacity, high power, long life, and strong stability.So how long is the Outdoor power life?How many years can it be used?

The number of cycles is a unit used to indicate the life of Outdoor power.At present, the lithium battery life is still available after the cycle of 1500-2000 times, and the capacity is still greater than 80%of the initial capacity.At the same time, with the continuous development of lithium battery technology, lithium battery life will be longer.

For example, the life of Outdoor power supply is 1,000 times, which means that when this power supply is charged from 0%to 100%, and then discharge to 0%, this cycle is about 1,000 times.If you use Outdoor power once a week, it is estimated that the service life is about 19 years.(1000 times 48 times a year = about 20 years).If you use it according to the working day cycle, the estimated life span is about 4 years.(1000 times a year 240 times a year = about 4 years)

2. How to extend the life of Outdoor power supply

1. Shallow and shallow

The shallow charging is not full charging, and the discharge is not complete. It often acts on the Outdoor power supply of lithium batteries as the core of the battery core.The purpose of shallowly and shallowly is to use the battery as much as possible in a normal environment.Prevent some abnormal fluctuations in the occurrence of over -charged and putting the single battery cells, which makes the final battery pack cannot work.So shallow and shallowness are a theoretical supporting method of lithium ion battery.And from the characteristics of the lithium battery, shallow charging and shallow blooming are more in line with the normal use state of the lithium battery.

2. Moderate filling in the idle period

Even if the normal energy storage equipment is not in use, there will be a certain amount of trace consumption. Therefore, in order to maintain the vitality of the battery, it is necessary to perform moderate filling for 3 months or 6 months to stimulate the battery's normal work.The opposite of the moderate charging and discharge is over -charging and putting. Over -the -LE will also cause the battery to lose money, and the work efficiency of the battery will also decline.

3. Charging the original charger

The charging of the original charger is a very important common sense problem. Micked chargers can make the charging efficiency higher, and it will not affect the power load of the battery.

4. Do not use it too much

The use temperature of the battery is limited to use temperature under normal circumstances, and too low and too high will cause the battery to stop working.On the other hand, the larger the working temperature range of the battery, the better the quality of the battery, the more prominent the technical ability.

5. Pay attention to waterproof moisture and moisture

Most of the Outdoor power fuselage has a cooling air outlet, so it does not have complete waterproofing.Such as water or rain will enter the interior through the heat dissipation port, and it is easy to cause damage to the battery.Therefore, good Outdoor power supply will be equipped with a well -quality waterproof moisture -proof power package, which is convenient for preservation and also plays the function of convenient carrying.

The function of smokeless barbecue car

Baked, fried, scalded, and iron plate burning function in one body, can be combined arbitrarily.

principle of smokeless barbecue car

The oil -containing flue gas passes through the high -voltage electric field, adding a DC negative voltage of 12kV to the high -voltage discharge cable in the electric halo area.Free electronic negative ions, negative ions are attached to the particles in the flue gas, so that the greasy particles in the flue gas are charged, and then the negative particles flow to the anode plate of the dust area.

In the dusty area, the positive and negative electrode plates are arranged alternately, and there is a uniform electric field between the electrode plates. After the negative particles enter the electric field, the action of the Curon is flowing and attached to the anode plate.In addition, the harmful gases in the smoke can be broken down by the ozone in the electric field, remove the odor, and the harmful gases are also removed.The removal rate of the oil -free barbecue car oil fume is more than 91%, and the clean air is discharged through the export export.

After entering the purifier of the oil fume, the large particle oil is filtered by the mechanical filtering principle; the filtered oil fossil enters the non -blind area of the plasma state.When passing through the non -blind area, the electrical, decomposed, and loaded; the gas -shaped charged particles were adsorbed on the electrode plate when passing through the high and low voltage electric field.

When the organic matter is purifier in the oil mist, the chemical reactions are broken down due to the strong oxidation effect of ozone. In addition, the trace amount of ozone sterilizes the excreted gas.Therefore, changing equipment has good oil removal, smoke, flavor, and sterilization.

Features of smokeless barbecue car

1. The furnace body is made of unique infrared smokeless barbecue burner. Its burner is a honeycomb, which can filter all gas flavor and make the barbecue tender.

2. According to the characteristics of the food, the size of the firepower can be freely adjusted to ensure that all kinds of food can achieve the best roasting effect. At the same time, the disadvantages of traditional charcoal grilling are very easy to bake food.above.

3. The furnace body adopts the design of heat storage and insulation. The heat no longer distributed outside the furnace body. The operator does not have to endure smoke and fire, and it is more simple, convenient, and flexible to operate.

Disclaimer: The above is derived from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

How to breed water earthworms

1. The life breeding habit of water and earthworms

Water earthworms are not large, about 100 mm long, but the group output is high.The difference between the tail gillworm and water silkworm is that the former has the tail gills, and the tail is often exposed to mud. It breathe with the water swinging.Water earthworms are happy to live in the mud in the mud waters with rich organic matter, and generally lurks in the mud surface 10 cm to 25 cm, hidden in the mud at low temperature.The water earthworms are darkened and can not be exposed in the sun. The organic rot implant, bacteria, and algae are used to take the soil.Water earthworms are mature for about 2 months, hermaphroditaries, and alien fertilization. Estate Bags are hidden in the cystic earthworm cocoons composed of transparent glue membranes.Generally, one to 4 capsules contains egg cocoons, as many as 7 capsules.Each adult in the reproductive period can excrete 2 to 6 cocoons.When the water temperature is 22 to 32 C, the incubation period is generally 10-15 days, and the life span of artificial cultivation is about 3 months.

Second, pit maintenance method

1. Pitching conditions

Build an ecological environment suitable for the life of aquatic earthworms, which requires micro -flow water, loose soil, rich rotten implants, and avoiding light.The pit ponds can be newly excavated or used to be converted into a puddle that is connected to the ditch. The area depends on the needs. It is advisable to be 3 to 5 Square meters (the length and width ratio is 3: 1 to 5: 1). The water depth is 20-25 cm.Water -retained loess or sandwich to build the bottom, and set up a drainage port (rural wealth network: http://www.sczlb.com/).Generally, the inlet should be separated, and one end of the water is drained.Before quoting the pits, you must also cultivate the bottom mud. It is best to dig the fertile fish pond silt, spread on the bottom of the pit, 10 cm thick, and then add 7.5 to 10 kg of livestock and poultry manure or farm Fertilizer per Square meter.Ferded cakes, bran, bran, etc.

2. Quotation of planting into the pit

Sex depends on water quality, mud, manure sources and seasons.The source of Fertilizer and mixed feed, large quantity, high yield.Generally, 0.25 to 0.5 kg is placed per Square meter.After training for 30 to 45 days, the daily income volume per mu can reach 10 to 15 kg, up to 48 kg.

3. Management

Keep micro -flowing water to make the water quality fresh, the amount of dissolved oxygen is high, accelerate the relaxation of metabolites, and increase the feeding growth of earthworms.The flow rate of general water flow is 2 to 8 cm/s.The speed should not be too fast. If it is too fast, the water flow will be washed away nutrients and the cocoon, which affects the output.After the earthworm is cooked, it should be feed every 2 to 3 days.If you are invested, the bait coefficient is about 2.6; if you use pigs and cow dung, the bait coefficient is 7.8 to 10.4.

4. Harvest

You can reduce the flow or break the water at night, causing hypoxia in the pit the next day or the morning, and the water earthworm will be forced to gather into the mud surface or float until the water surface, and use fishing.

two,What is the difference between water earthworms and red worms

the difference:

1,Earthworms can be called universalbait, Almost all can be caught.

2. Red insects are better to fish for catfish, and there are more red insect bacteria, and there are no wounds in the hands when used.

3. The red insects are small, there are two types of earthworms, one is also red, but it is obviously longer than the red worm, and the other is blue and black. This is not suitable for fishing.