[Wild fishing bait] How to make wild fishing bait formulas in the production of wild fishing bait

Wild fishing bait formula

1. Steamed buns: Make this bait is very simple: when fishing, use a plastic food bag to wrap a piece of steamed buns. The fresh, the better the size is.Peel, drip ten to twenty drops of wine controlled from the bait of the wine, and then add an appropriate amount of water in the fishing ground, and the soft and hard dough.Using this bait is not afraid of small miscellaneous fish nests, and the biggest benefit of this bait is that in the midsummer of the red sun, when the fish does not bite the hook, as long as there is fish in the nest, it is easy to leave this bait, it is easyThere are Fish hooks.

2. Take a house -raised firewood egg. Other eggs are followed by the effect, 30 grams of sugar, a moderate amount of Flour, and a slightly harder dough. Do not add water.Take a small rice tank of Xiaogan, you have to be polluted after drinking it, and there are rice tanks with rice wine on the tank wall. If there is no residual in the tank wall, add some rice wine when you have noodles.Put the dough into the tank and seal it with two to three layers of plastic. It must be sealed tightly, otherwise, the surface will have a sour taste, which is not easy to use.Under normal circumstances, use an egg and noodles, and can be used to fill the tank for two or three days, and it can be used at this time.When used, open the plastic cloth, there will be a mellow fragrance and sweetness of wine, and because of the fermentation, the surface will soften, add some Flour, and drop a few drops of sesame oil in it.EssenceThis bait, catfish, carp, grass carp love to eat.Used for Fertilizer and water fishing and wild fishing.

passUnifiedfishingbait

1. Fresh earthworms are equipped with hooks, shake the soil, dip in the dragon king hate musk liquid flavors, put in fishing spots, fishing catfish and carp, with outstanding effects.

2. The fermented oil residue of the sesame oil workshop is stinky and fragrant, mixed with noodles, tuned to hard and hard like earlobe, takes soybeans to hook, and special effects fishing chain.

3. Mix the corn surface and white surface, and use thickness and noodles to adjust to loosening.As needed, adjust it into bait, fishing, and bad food.Floating fishing, directly attacking the white chain, flower chain, and grass carp;

4. The leftovers of Kung Fu Tea, raised earthworms, earthworms have good momentum and rapid reproduction.fishing with the developed earthworms is several times more than ordinary earthworms.

5, Wheat bran, stir -fry; corn surface, fried; green corn kernels, crickets, stir -fried Wheat bran and corn surface, mix some white noodles in moderation, make mixed food, fishing carp, grass carp, and catfish.

6, soybean savory (can be in popcorn), grind into powder, used as dipping bait, carp fishing has special effects.Mix with two -point soybean Flour, three -point white noodles, and five -point corn surface, and cook with boiling water to make a bad food, fishing catfish and carp.

7, red heart grilled Sweet potato (white heart can also be), cut into sieve pieces, hook fishing catfish, and it is better to fish carp.Mix roast sweet potatoes and hot corn surfaces, can be made into bait, and can also be made into bad food.

8. Take the mint leaves by the river or reservoir, rub it with dried millet, sprinkle the fishing spots, seduce catfish with special effects, and avoid small miscellaneous fish.

How to make wild fishing bait

1. Plum Bud bait

One time fishing, I found a fish on the shore plant flowers.Back to the fishing position, I took two flowers buds and hung on the hook. It was very spiritual.Since then, I have tried it with other fishermen many times. It turns out that the use of pearl plum buds to fish for catfish during the summer is several times stronger than using pasta and earthworms.Pearl plum is a shrub, which has a long flowering period, and it can continue from mid -June to the end of September.During this period, it was a hot summer. The catfish had gradually entered the anorexia period. The interest in bait and pasta was greatly weakened. Facing the cool and fragrant pearl plum buds, they had special interests.

2. Sweet potato bait

Cook the sweet potatoes or steamed it to nest as bait.Because the cannon Sweet potato contains a lot of sugar, it has a natural sweetness, it is pale yellow, light red, carp, grass carp, cattle, catfish and so on.But use artillery sweet potatoes to make bait, remember not to be too familiar.It's too familiar to hang the fish hook, and it is easy to fall off; it is too familiar, Hanging the fish hook, but the tasteless, the fish does not ask.The most ideal method of making raw potato bait is to cut yellow potatoes with yellow or white -skinned red heart into two or several pieces, cook in the pot or steam it to seven or eight mature (cook for about 10 minutes), use a bamboo stick to a bamboo stick,It is better to poke when it is worn.

Third, puffed powder bait

There are often foods such as "walnut nutrition powder", "advanced protein nutritional powder", and "sesame paste". They can often smell a strong puffed smell with boiling water.The appetite of fish, grass, , etc.The main ingredients of the above -mentioned nutritional powder are puffed powder. Almost all food stores are available. It is very convenient to use it. It can be described as a good product for mermaids.Before use, a small bag of nutrient powder can be blended into groups with corn noodles, Flour, bean Flour, and finished bait powder.If you add a few drops of sesame oil to mix well, the effect is better.

Fourth, malt bait

Malt is rich in nutrition and sweet, rich in carotene and a large amount of vitamin E. Therefore, Chinese medicine often uses it to make appetizers.The folk also uses it to make maltose.

The length of the malt is 6-10 cm, and the content of vitamin C and A will be high. Usually at this time, fishermen use it as a feed for grass carp or carp.At this time, it is the most ideal bait with it to use it as a bait.Before fishing, pick some moderate maltza to make a 2 cm long, 1 cm diameter malt grass cluster hook, and its effect is significantly better than other bait.If you use this bait to fish carp, you can mash the malt as a nest as a bait, or you can mix it in other bait to fight the nest.

In addition, malt can also be used for floating grass carp.The method of cultivating malt is very simple. When the ambient temperature is 20 right, use warm water at 12-20 C, add a little salt, and soak Wheat grains for 24-8 hours.After its swelling, it is flourished in the porridge container, covering a few layers of wet gauze and placing it in a shelter. Spray 30 C of 30 C every day and night 3-4 times.After the germ, remove the cover, it can be used after 2-4 days.

Five, snail mussel bait

Buy snail meat from the market, crush it with a meat grinding machine, add it into the homemade bait, and you can throw fishing at will.

This bait is characterized by a large fishy smell, and carp likes it.The hook of snail mussel bait is firm and does not fall off. One bait can catch more tail fish, and it does not recruit small mixed Fish hooks.It is available in spring and summer and autumn. It is economical and convenient, and fishing and other fish.

Six, bait

Green maggots are widely survived on the leaves and stems and leaves of green vegetables, such as roll -hearted white, Chinese cabbage, greens, foreign cauliflower, etc., and the maggots are made of leaves, so the body color is green.

When vegetables grow as long as 40-60 days, the individual of green maggots is generally about 2 cm, which is the best stage for fishing.Before fishing, use a small box to fold a piece of vegetable leaves in the box, and you can catch the green maggots into the box one by one in the vegetable field. Because there is vegetable leaves attached, the green maggot will not climb out of the box. You can also use a small pill bottle.Playing, more convenient to carry.

Green maggot should be used on the same day, and it is easy to die for a long time.Beans are mainly attached to the pods in plants such as soybeans (also known as soybeans and black Beans).

Bean maggots have grown rapidly since the green soybean pods. When the soybeans are yellowed, it is also an adult individual, and its body is 0.5-1 cm in length.The color is slightly yellowish, which is slightly larger or similar than a grain of mung bean rice. At this time, collecting Beans fishing is the best bait. Because the bait is eaten with Beans, its smell is full of flavor, and it is easy to attract fish.hook.

Bean maggots are more tough than green maggots. Therefore, Hanging bait is more firm. The bait is clean and hygienic without polluting fingers.There are many kinds of Beans like green maggots.

Seven, broad bean Flour bait

First, choose good materials.Broad bean has three types of green Skin, white Skin, and red Skin. The green Skin is superior, and the white Skin and red Skin are grinded.

Secondly, go to the shell.There are two ways to remove the shell: one is to put the broad beans in the pot, and fry it with a micro -heat until a number point.Do not want to be cooked with broad beans, otherwise you will lose the smell of raw bean and lose sticky. Catfish do not like to eat.After the fried broad beans are cooled, peel off the shell with a small knife.The second is to use a crusher and remove it and remove the shell.Dry again.Dry the bean with a micro -fire, dry the broad beans, one is polished into powder, and the other is to store it well.

Fourth, it must be polished into powder.There are two ways: one is to play with stone mills and crushing machines.The finer the fans, the better the finer, the stronger the more sticky.You can push and play at 0.5 kg each time.The second is handmade grinding method.On the eve of the fishing, the bean of about 10 shells of the shell is grinded on the ground dumplings by hand, or clamped the broad beans with a clamp and grind them on the coarse sandpaper.In this way, the freshly grinding broad bean Flour has a strong smell of raw Beans and better effect.

Eight, mulberry bait

Choose a linked mulberry, and you should choose the 7-8 mature mulberry as a bait on the spot.When the hook is linked, the size of the mulberry depends on the fish in the river.If there are more fish and large heads, you should choose a larger fruit hook; if there are fewer fish, you should pick a mature small fruit, or half a hook (preferably cutting the knife).

It is okay to penetrate the tip penetration, and the fish is more likely to hook.Since the mulberry is mature to the end of the fruiting period, the mulberry falling from the mulberry tree by the fish is often moved to a fish in a section of waters near the tree, forming a partial eclipse.The fish in the surrounding waters are accustomed to falling fruit, and they generally do not stay away. As long as a few throws a few, they can attract.

1. Introduction to Diving clothes

Subtaking, its main role is to maintain the body temperature of the divers and prevent accidental damage (because some jellyfish and corals are toxic).You can also show sunburn.Subtaking can be divided into dry diving and wet Diving clothes.As the name suggests, the dry type is waterproof, mainly in the cold zone.Wet type is not waterproof, but it can also keep the body temperature difficult to disperse.

2. How to choose Diving clothes correctly

1. Selection of the thickness of Diving clothes

Diving environment independent variables, Diving clothes for variables.Starting from the functions and functions of Diving clothes, because the main role of submersible is to keep warm, the thickness of the submersible is determined by the water temperature of the sea area.Generally speaking, the thickness of about 0.5mm-3mm is warm in the waters.The cool water temperature requires 5mm or more wet Diving clothes; the style selection is also determined by the diving environment, such as water temperature, marine biological types, etc. Generally speaking, there are three types of jellyfish, wet diving and dry Diving clothes.

2. Choose the right size

The technique of diving clothing is important to try on the size.After checking whether there are still some space after putting it on, if you can wear another piece of clothes, if this happens, you will not be able to keep warm;Too short trousers indicate that the Diving clothes are too small.

3. Diving fabric selection

Substitute purchase prompts, fabric selection is very important. Neoprene is commonly known as diving materials.Generally speaking, it is a synthetic rubber foam. It feels delicate, soft, and elastic, and has the characteristics of shockproof, insulation, elasticity, impermented, and impermented.Good weather resistance, oxygen resistance, self -extinguishing, good oil resistance, stretching strength, elongation rate, and excellent elasticity.

4. Diving clothes style selection

Site (tights) is suitable for wearing in tropical waters. After the water is out of water, it can protect you from the burns of sunlight, and it can prevent the waterproof mother bite. It is elastic and thin. It is similar to a swimming suit.Buy.Wet Diving clothes are the most common submersible. It has different tailoring design and thickness. Therefore, within the water temperature range of 10 C-20 C, it can provide appropriate insulation effects.Dry Diving clothes keep you dry and get good insulation.It is the best diving in leisure diving insulation, especially when the water temperature is lower than 10 C, it is even more useful, but its price is also more expensive.

What is rice shell ash

rice shell ash is a by -product made of rice shell, rice bran and broken rice. It can be made into various useful products after processing.

The main component of rice shell ash

The rice shell ash is mainly composed of silicon dioxide and unfamiliar carbon. The content of silicon dioxide is generally more than 80%, but the shape of the silicon dioxide is related to the incineration temperature of the rice shell.

How much is the rice shell ash a bag

The sale of rice shell ash on the market is generally calculated by Bags. At present, the latest price range of rice shell ash is 6 yuan/bag-25 yuan/bag. The specific price is based on the actual market situation.

What is the use of rice shell ash for plants

1. Keep warm

The rice shell charcoal often acts on Succulent plants. When cutting, a small amount of rice shell charcoal is mixed when cutting, which can promote the growth of the root system and the cutting survival rate is relatively high.In addition, in winter, a small amount of rice shell charcoal can be added to keep warm and avoid frosting plants.

2. Promote flowering results

The main ingredients of rice shells are phosphorus and potassium Fertilizers. Everyone applies phosphorus and potassium Fertilizers when farming.Therefore, adding an appropriate amount of rice shell charcoal before the flowering period of flower and plant can play a role in promoting flowering results.In addition, the permeability of potting soil can be increased to regulate soil pH.

3, absorbing and humidity reduction

A very large characteristic of rice shell ash is the moisture absorption, which can absorb too much moisture in the air. While absorbing and moisturizing, it will reduce the chance of plant disease.

4. Referred insulation

The rice shell ash is equivalent to an insulation layer on the soil layer.In the case of hot weather, for example, when the summer of April is coming in April, the air temperature will gradually rise. At this time, adding a layer of rice shell coverage will instead the heat insulation.

How to use rice shell ash correctly

The rice shell ash is a common farm fat, but it does not mean that the more it is applied, the better. Generally speaking, 5%-10%of the amount of soil is applied.You can, mixing flowers in water.

Here we have to talk to the flower friends that the phosphorus and Potassium fertilizer in the rice shell ash is soluble, so if it is sprinkled on the surface of the Flower pot, pay attention to watering and drizzling in time, so that the Fertilizer effect can be absorbed by plants into the soil.

How to put it in the Tent

How to close the automatic Tent

(1 ) Put your hands on the head of the Tent pole, on the two branches, force the middle to the middle, and close the two Tent rods.

(2 ) Holders with both hands slightly, pressing the head down.Note here that when storing, it is best to open the door of the side to discharge the air inside.

(3 ) Fold the four corners of the Tent.When the folding lever, gently pull it out, and then fold.Note: Because there are locks at the joints, if it is folded hard, it is likely to damage the ledger.

(4 ) After folding the four corners, lie flat on the ground, roll up the book, the size of the Tent is out of the Tent, and then tie it to the rope.Remember to take it slowly so that the gas in the Tent can be completely discharged.Finally, put it in a storage bag.Why do you choose to use rolls instead of folding and folding?Because the folding will be greatly damaged to the coating, it is recommended to choose a roll instead of folding the Tent.

How to close the folding Tent

(1 ) First check the four corners of the folding Tent stent, whether there is abnormalities.Note that the four spring buckles on the corner, the spring buckle of the supporting Tent should be buckled in the eyes of the Square Tube, and the Square Tube eyes can be moved up and down.

(2 ) spring buckle is unlocked from the eyes of the Square Tube.All the spring buckles of the four corners are unlocked.All the items in the folding Tent are emptied.

(3 ) Two people stand relative, holding two brackets of the folding Tent with both hands.It should be noted that the two should stand at the vertical folding of the canopy bracket to ensure that when they are hard, the top canal can be folded up.

(4 ) The two push the bracket together in the direction of the other side, so that the top of the canopy bracket is folded.

(5 ) Fold to fold 70% When, you can flatten the folding Tent on the ground.Pay attention to the ground clean, do not stain the Tent.

(6 ) Unveil the four corners of the tarpaulin.The four corners of the tarpaulin are on the four corners of the canopy, and the magic stickers are tightly sticked to unveil the magic sticker.

(7 ) Take the canopy bracket and collect the four bearing brackets and push the internal pipes.

Pathfinder Tent installation method

*Umbrella Tent installation steps

Just install it according to the instructions.

Other road detectors Tent installation methods: First, lay the Tent front on the ground.Secondly, put the support rod on the paved Tent.Finally, the buckle on the Tent is evenly stuck on the support rod, which is the installation method of the buckle Tent.

If there is no buckle, you can go through, and there will be perforation on the corner of the Tent, and you can put the support rod in.Put the end of the support rod on the fixed buckle on the four corners of the Tent.Tie the two support rods at the top (the top is designed with a rope).If you need to insert the attached fixed rivet link Tent around. Pathfinder Tent products & gt; & gt;

1. design instructions for landscape street lights

Landscape art lamps are indispensable parts of modern landscapes. It can not only provide Outdoor photos, but also have high ornamentality. It uses different shapes, different light colors and brightness to create landscapes.The landscape street light design should follow the following points:

1. Choose the right position

Landscape street lights are generally set at the entrance and exit of garden green spaces, squares, and transportation roads. The traffic on both sides of the garden road and intersection, steps, surroundings of buildings, water view Fountains, sculptures, lawn edges and other people need lighting or can be with the landscape environment.Combined with a unified area.

2. The illness should be coordinated with the environment

The brightness selection of Landscape lights should be appropriate, such as entrances and exits, squares and other people's streams, and require sufficient lighting intensity; while walking trails and other roads do not require too bright lighting. soft and relaxed Lights will make the environment more quiet, comfortable, kind, and kind.pleasant.Of course, the overall landscape street lights must form a unified layout to ensure that the light illuminance is evenly and undulating, with the artistic effect of a bright and dark rhythm, and prevent the dark corner without light.

3. Choose the right street light height

The height of the landscape street lights is appropriate. Generally, the height of ordinary Landscape lights is about 3m, and the space Landscape lights with large people are higher. Generally, it is advisable to be 4M-8M.Ensure uniform illumination.

How to installLandscape lamp

1. Circuit, steel pipe layout

The design is designed to use the wire Tube and the steel pipe dark application. The construction shall be carried out in accordance with the construction process standards of the wire pipe and the steel pipe laying project. The embedded pipe should be closely cooperated with the civil construction construction.The line uses a cable to be buried in the HDPE Tube, and the pipeline is buried by 0.7m. All line branches should take reliable waterproof measures.

2. Thread

The wires selected in the Tube must meet the design requirements, and there is a factor -issued certificate. Check the insulation resistance, the diameter diameter of the wire, the material and the weight of each volume to meet the requirements before it can be used.The Tube should be carried out after the construction structure and civil construction construction operation. Put the line first. Note that the wires of the same communication circuit must be worn in the same Tube. Different circuits, different voltage and communication and linear wires must not be penetrated into the same Tube; thenClean pipelines, switch boxes, socket boxes, etc.

3. lighting installation

The installation of Landscape lights should check whether the lamps meet the requirements according to the installation venue. Check the wiring in the Lights. The installation of the lamp must be firm, the position is correct, neat and beautiful, and the wiring must be correct.After the installation is installed, the insulation resistance is detected and Running after passing the insulation resistance.

4. Ground protection and safety measures

Set up a closed ring artificial grounding device around the Outdoor lighting box, 5m spacing, 0.8m buried depth, and not more than 10 ohms.To prevent lightning strikes from over -voltage, a first -class surge protector is set in the Outdoor lighting box.