In which season is the succulent sunburn

Midsummer and early autumn.summer is because the weather is hot and strong, and the early autumn is because some succulents suddenly receive light after the summer shade.

Under what circumstances will increase the rate of sunburn

1. When watering, the water droplets remain on the leaves and then receive strong light, and the sunbath may appear.If the center of water is accumulated and the soil is humid, it is easy to water or even dark, so try to water in the morning or evening, and blow off the fleshy water droplets after watering.

2. The sun is hot, and the sun is sunny without Shading.

3. For a while, I do nt accept light, and then suddenly the light is shining.

What should I do if the Succulent plants are sunburned?

The sunburn is irreversible. The sunburn will not fade. It can only slowly grow new leaves instead and gradually grow back to the original beauty.When the succulent sunburn, take it back to cover the yin and ventilation in time, and you cannot sun.If there are hydrated leaves, they are carefully removed, and the black rot leaves are also removed. Spray the fungal spirit to prevent it. If the black rot is serious, it may hang.

How to avoid fleshy sunburn

1. Keep ventilation

Maintaining ventilation is an important way to cool the fleshy cooling, and it can also keep the humidity in the air balance.

If the succulent is in a dull environment, and the sun exposure, it will not only cause the soil surface to produce pathogenic bacteria and cause the bottom stems and leaves to rot. If it is more serious, the root system will die.

2. Correct yin

Adjust the position and angle appropriately.According to the balcony direction, the location of the Flower stand, appropriate adjustment angle.Avoid strong light at noon.Especially for those who are close to the glass, they should move the position appropriately.Near the glass, the light itself is strong, and the reflection or something will make the temperature of the pot soil very high, resulting in the sultry of the roots.It is recommended to move close to the glass in summer.

3. The environment should be neat

Many people may ask, "What is the relationship between clean environment and Sun protection?" Of course!The weather with high temperature and humidity can easily cause succulent to breed moldy bacteria. Therefore, it is necessary to clean and ventilate the surrounding environment daily, and it is necessary to clean the leaves and dead leaves.

4. Watering level

We must pay attention to the polynomotic water to control water. It is best to wait until the soil is completely dry after half a worship, and the watering time is best to choose a cooler evening.Just click.

5. Build a simple sunshine shed

If you are rashing outdoors, a sunshade should be built appropriately according to the situation.It can be properly shade, so that the shade is too heavy to make the succulent fade and grow.It can also ensure ventilation and breathable, maintain a dry and dry environment.

[Selection of mountaineering shoes] Purchase of Outdoor Climbing shoesHow to choose Outdoor Climbing shoes

In outdoor sports, the importance of Climbing shoes is beyond doubt, but in fact, many domestic donkey friends do not know the importance of mountaineering shoes. I have seen a lot of wearing X -A X to take a long -term long line, that is to use it at one time.It's not just as horrible to come back, but the soles of the feet are as horrible.Therefore, the focus of this article is that the old donkey summarized the online information based on his own experience and gave the following suggestions. In helping everyone to establish the concept of mountaineering shoes and how to know how to buy mountaineering shoes.

1. Classification of hiking shoes

(1) Trailshoes-hiking shoes: Suitable for the flat Hiking Hiking activity for a flat and light weights, even in the mountains, its terrain environment also has a clear and flat path.Due to the wide application of GoTe-TEX fabrics, even hiking shoes, in rainy and snowy weather, the wearers will ensure the dryness and comfort of the feet in a humid environment.

(2) HIKINGBOOTS-Hiking walking shoes: For pure mountains that are used for two or more days, and even the event area directly reach the mountain area below the snow line.It also performed very well.

(3) Mountaineering-heavy Climbing shoes (polar Climbing shoes): It is suitable for the terrain of the mixed ice and snow rock, and it must have a very hard sole and compatible with fast-buckled ice.But it is less suitable for flat Hiking.

(4) TREKKING-heavy mountaineering shoes (long-range reinstalled hiking shoes): Long-distance health in the mountains, emphasizing comfortable and durable, long-distance use, but not specially required climbing functions.The middle layer of this hiking shoes is more flexible, so that you can get additional thrust every step; the soles are also hard, so that you can cross the rugged and difficult barren zone.

(5) Backpacking-Short-range reinstalled hiking shoes: designed for large Backpack Hiking-the itinerary is not long, but the Backpack is heavy, so the sole is also a hard bottom, and the support is very good.

(6) Hiking-short-range lightweight hiking shoes: lightweight Hiking, because the weight is not heavy, so emphasizes comfort and abandon the hard sole.Still good support.

Second, the similarities and differences in these types of mountaineering shoes:

(1) Hiking-short-range lightweight and hiking shoes/non-slip, wear-resistant, breathable fast dry/short-unified, lightest, usually not waterproof, soft bottom.

(2) Backpacking-Short-range reinstallation hiking shoes/non-slip, abrasion resistance, breathable fast dry/lightweight, lightweight, hard bottom, usually waterproof.

(3) TREKKING-long-range reinstalled hiking shoes/non-slip, abrasion resistance, breathable fast dry/middle, weight, harder bottom, usually waterproof, insulation.

(4) Mountaineering-Polar Climbing shoes/non-slip, abrasion resistance, breathable fast dry/medium high, the most heavy, ultra-hard bottom, usually waterproof, high insulation, and applicable icing.

How to try the shoes?

(1) Wearing socks that you expect to match this pair of shoes. In other words, buy socks and wear socks to try. In general mountaineering environment, the matching suggestions of socks are a pair of thin sweat socks plus a pair of medium thick climbing socks.Essence

(2) When purchasing the shoes of Zhong Gao, do not tie all the shoelaces first, just tie it to the ankle, so as not to avoid the shoelaces that will affect your judgment.Here, do you feel that there is any side to any party in the shoes first and left and right. It should be noted that the length of the mountaineering shoes will not change after wearing it, but the internal width and height will increase slightly.The enough standard is slightly loose, and the left and right width can be slightly tight or just right.

(3) After there is no problem, tie all the shoelaces after there is no problem, remember to tie it tight enough.

Fourth, the choice of mountaineering shoes

This problem is concluded. If it is ordinary hiking shoes, especially full Skin, it must be one to two sizes. If you put double -layer boots on the high altitude, because the outer layer is plastic, it will not shrink, and you must if it will not shrink.Choose according to normal size.My experience of buying shoes: First put on thick socks (if not, wear both feet), wear shoes, and laces.

(1) In the case of not tie the laces, lean your feet back to the back, and feel the support of the soles on the feet, especially whether there is a reasonable arc at the foot of the foot;

(2) Whether the sides of the left and right sides of the shoes are suitable, and there should be no large gaps. There should be a large gap in front of the toes;

(3) Lean your feet towards the tip of the shoe, the roots and heels should have a half to two fingers;

(4) Tightening shoelaces, feet roots, ankles, feet, and other parts should be reasonably supported, and there must be a feeling of space or too tight anywhere;

(5) String your toes on the hard ground (don't let the shop owner see it, it will be distressed), the toes should not be topped to the tip of the shoe. If it is, it means that the shoes are too small;

(6) The next choice is to reduce the Running -in period of the climbing foot as much as possible.After tie the shoelaces, do not heel too tightly, the ankle of the high -top shoes should not be too tight, and the tongue should not be too pressed.In fact, as long as you choose the right size and shoes enough, you may not need to run the Running -in period (but I haven't found it yet).

Special attention:

Don't believe in the size of the shoes, believe in your feet.My feet wearing leather shoes is 40. Wearing sneakers is 39. Ozark is 39. Wearing Lasportiva is 43, scarpa is 42. I don't know how big my feet are.

5. 10 techniques for buying a pair of good shoes

(1) Ask the master. When you walk into a mountaineering shop to buy shoes, the salesperson who requires the most knowing shoes to help, or choose a product store with a mountaineering master.Meet.

(2) Before you can measure trials, do not use the size of the previously bought shoes to infer that the size of the feet will change.

(3) Do not be confused by the size number. Whether it is British size, European size, or American size (also divided between men and women), the size of the size will be affected by the standard and design of the shoe factories.Size.

(4) Buy shoes at night!At night, people's feet will swell slightly slightly, just like when walking on the mountain.

(5) Try it slowly, don't be too anxious to make decisions.Prepare two and a half days to buy a pair of good shoes, try to try different labels and shoes as much as possible.

(6) Bringing your own socks, it is best to match the socks of mountaineering shoes.

(7) After tie the shoelaces, the movement of the movement to see if it can be encountered in the front wall. After the new shoes are worn for a long time, the width and thickness may be slightly increased, but the length will never be increased.With nails.

(8) When trying it on, wearing shoes, on the one hand, make the leather or fiber of the new shoes more flexible. On the one hand, you can also try whether there is any uncomfortable uncomfortable place.

(9) Buy suitable shoes for use, but don't think of a pair of shoes to cope with all uses.Don't just buy a pair of special shoes for a special itinerary.

(10) Grasp the feeling of your feet, pick a pair of most comfortable, and try all the shoes with those standards. Only one person knows which pair of shoes is most suitable for you.

Profile

The queen of the silver, also known as the silver queen, ribs after silver, and brightened silk after silver.Tiannan Xingke is a leaf -viewing plant with beautiful leaf color, especially shade -resistant, potted plants embellishment room, with obvious effects, particularly bright and comfortable.At present, the silver queen is often used as cut leaves for flower arrangement, leaf or potted decoration indoor and Outdoor environment.

The silver queen is a perennial herbaceous plant with a height of 30-40 cm.The leaves are alternate, the petiole is long, the base is enlarged into sheath shape, the leaves are narrow, the leaf surface has gray -green stripes, and the area is large.Root yellow, bean sprouts, very small.On the top of the root is the leaves, the unknown leaves are round and wrapped.The new leaves are light green, the middle is gray and some light green spots, the back is light green, like the leaves of the big tree.The color of the growing leaves is slightly darker.The leaf just grows is about 3 inches, and 5 or 6 inches after shaping.

The Queen of Silver is native to South America, and various tropical cities in Guangdong and Fujian, China, are commonly cultivated, and there are also Yisheng.

Nickname

The Queen of the Silver Queen, the ribs of the ribs of the silver, the brighter silk after the silver

Suitable place

1. Put in the living room

The silver queen can be placed on the desktop of the living room, which can reflect a comfortable and comfortable home style.The silver queen's leaves are beautiful, and they are particularly shade -resistant. The potted plants are embellished with obvious effects, and they are particularly bright and comfortable.Putting in the living room is both fashionable and can make people feel the existence of nature when chatting, and the conversation becomes much easier.

2,Put inIn the corner

Putting the silver queen in every corner of the house reflects the home style that loves nature.The Queen of Silver is a perennial herbaceous plant. It not only has high ornamental value, but also has good air purification ability. The higher the air pollution concentration in the environment, the stronger its purification ability, so it can be placed in any corner of the home.

3. Put it on the bedside

The Queen of Silver can be kept in the bedroom. I open my eyes every day to remind himself a good day and reflect the personal style of struggle.

Effectiveness and role

Purify the air

The Empress Silver is known for its unique air purification ability. The higher the concentration of pollutants in the air, the more it can exert its purification ability, so it is very suitable for dark rooms with poor ventilation conditions.The silver queen can remove the nicotine and formaldehyde in the air. There are smokers or just renovated in the family. You can consider putting a pot of silver queen to purify the indoor air.

View

The Queen of the Silver has a high viewing value. The leaves are large and wide, and the shape is beautiful and generous. It can be placed in the living room, bedroom, balcony, kitchen and other places to play a role in decorating home and improving the environment.In addition, the silver queen is toxic. After the stalk of the silver queen is broken, the transparent liquid will be secreted, giant, better than the yellow lantern Pepper, and lasting the utility.When planting at home, it is necessary to prevent children from breaking the stems and leaves to lick the entrance.

Breeding method

illumination

Pay attention to Shading in summer, not to make the light too strong, otherwise it will be prone to sunburn.Pay attention to lighting in the winter room to prevent the light from fading in the lack of light.

Humidity/watering

Water in winter and spring rain is less. After the pot soil is dry in winter and spring, the minimum temperature must reach more than 15 C before pouring proper warm water.summer growth is strong and can supply a lot of water.In the late spring and early summer, there can be less acidic nitrogen fertilizer. In the summer, nitrogen fertilizer can be applied. In the early autumn and the Mid -autumn Festival, some compound Fertilizers can be applied.The Fertilizer is thick and the stems are thick, and the leaves are large, and the leaves are hypertrophy.

temperature

The queen of silver grew the fastest at 20-24 C, stopped growing above 30 C, and the leaves were easy to yellow.Therefore, in summer, heatstroke and cooling should be paid attention to ventilation, and it should be cultivated in the sheds in winter. It is advisable to overwintering temperature of 10 C, and do not be lower than 5 C.

soil

Most of the silver queens are potted plants.Potted plants usually use loose peat soil, grass charcoal soil, or mix with corrupt leaf soil and sandy loam soil, and dilute the soil after a small amount of iron sulfate.

Fertilize

In the peak season of spring and autumn, watering must be sufficient, potting soil should always be kept moist, and often uses water with similar room temperature to spray branches and leaves to prevent dry tips, but water cannot be accumulated.Apply a thin liquid Fertilizer once a month and half a month of the growth season.

Frequently problem handling

The cause and treatment of yellow leaves

1. Too much watering

Too much watering causes soil plates or too much stickiness, so that the roots of the silver queen are not breathing, resulting in rotting roots, reducing the ability of the root system to absorb moisture and nutrients.yellow.

Solution: After the Queen Yin Queen enters the room, the space is not as wide as the Outdoor, and the water on the pot soil and the surface of the plant will be reduced. Therefore, the watering should be appropriately reduced. If it is still watering at this timeYellow.Therefore, the silver queen should pay attention to the amount of watering, and it is carried out regularly. Watering when the pot soil is about to dry, the watering should be poured.

2,Dry air, too strong light, high temperature

These three situations usually appear in the summer and autumn season, because the silver queen likes to grow in a wet semi -yin environment. Once the air is dry, the sun is strong, and the temperature is just above 30 C, it is easy to cause the leaf tip of the silver queen.

Solution: If you encounter this situation, immediately move the silver queen to the semi -yin environment, cut off the dead leaves, and often spray water and ventilate. The leaves of the newly growing silver queen will return to normal.The Queen of Silver likes the environment of semi -yin is very shade -resistant. Don't worry about long -term shade will also affect its growth.

3, too low temperature

The silver queen likes a warm living environment. When the temperature is lower than 10 C, it will stop growing. When it is lower than 5 C, it will affect the growth of the Queen of Silver, causing the leaves to yellow.

Solution: During the simultaneous maintenance process, try to control the constant temperature as much as possible, do not fall low.

4,Improper fertilization

Without fertilization or too much fertilization for a long time, the leaves of the silver queen will be yellow. When fertilizing, use liquid Fertilizer and thin Fertilizer.

Solution: Apply a thin liquid Fertilizer once a month and a half of the growth season.After the autumn, the growth of the silver queen will gradually slow down, and the ability to absorb nutrients gradually decreases. At this time, fertilization needs to be reduced to prevent the leaf of the silver queen from yellow. Watering in winter should be less and stop topdressing.

5. Do not change the pot for a long time

It does not change the pot for a long time, the soil plate of the pot is knotted, and the roots have insufficient growth space. Under a high temperature, high drought environment, it is easy to cause the silver queen's royal apex to wither and make it lose their absorption function.

Solution: If you encounter this situation, you can pour the silver queen out of the Flower pot, cut off the dead branches and leaves, cut off the necrotic root system, replace it with half of the new soil, and then put it on the cool, moist, semi -semi -half -halfIn the shade environment, pay attention to spraying water in time, and the new tender leaves of the plant can return to normal.

Silver Queen's disease and insect pest control

1. Leaf spot disease

disease

The weather with high humidity is easy to occur.The brown spots will appear on the leaves in the early stage, and the surroundings will gradually fade green, and the wheel -shaped diffusion will be spreading. The brown inside will be gray -white inside the edges.Later lesions gradually expanded, dark brown lesions appeared, and dark brown mold layers were formed in a humid environment.

Control method

Clear the diseased leaves in time. Once the black spots are found, the leaves are removed immediately.0.5%to 1%of Bordeaux or 50%multi -bacterial spirit 1000 times liquid can be sprayed at the beginning of or or later.

2,anthrax

disease

In the early stage, the Yin Queen's Better Mountain will spread to the whole plant in severe cases.At the time of the onset, there will be water -stained small yellow spots on the leaves, which gradually expand and appear round or oval brown or yellow brown spots. Later leaves withered, producing many small black spots.The disease is often caused by poor ventilation. When the harm of the segene is harmful, the condition will be more serious.

Control method

Strengthen maintenance, increase phosphorus and Potassium fertilizer, and increase the disease resistance of plants.Open the windows to ventilate in time to ensure that the plants are maintaining the environment of the environment.At the beginning of the onset, you can use Bordeaux or 1500 times liquid to spray.

3, brown soft

disease

When the softness is harmful to the plant, the cluster is generally on the leaf surface or the tender leaves, and the pests inhale plant liquid juice, and at the same time excrete the mucus.The weakness, the leaves are yellow, and there are observation.When severe occurrence, the branches are covered with worms, causing the plant to yellow and affect growth.

Control method

If there are fewer plants or the number of insects, it is generally scraped by bamboo and other objects.If the blades are already damaged, try to cut the damaged blades as much as possible.Then spray it with a bactericide to disinfection.

4,Rotten root disease

Pot soil water and nutritional roots are rotten.Because the pot soil is too sticky or too frequent watering, it has caused the rotting of the nutritional whisker roots of the silver queen. In this way, the ability to absorb moisture in the root system will greatly decrease, which will cause the pendant to darkened the tip of the leaf leaf, and the edge of the edge will be black. Inside the edgesong.If this is the case, the plant can be removed from the Flower pot, shake off the soil, cut off the rotten root part, put it on the clean wet sand planting, keep the sand grains moist, and you cannot spray too much water.After giving birth to the white and tender thin whiskers, re -replace the fertile cultivation soil planting.

5. Leaf disease

For a long time, the basis is not given, resulting in the growth of the root system to the wall of the pot. In an environment with high temperatures and droughts or cold weather, it is easy to cause the root apex of the root cause of atrophy and necrosis, which causes it to lose its due absorption function, which causes the leaf tip to shrink.If this is the case, first pour the plant out of the Flower pot, cut off the necrotic part of the dead leaves or leaves, and then pick up some old soil, delete some aging or necrotic root systems, re -switch to fresh ones.Cultivate soil planting, put it in a cool, moist, and semi -overcast environment. Pay attention to spraying more water and less watering. The new tender leaves of the plant can return to normal.

precautions

1. The silver queen likes to grow in the environment where the air is moist and semi -overcast. Once the air is too dry, the sunlight is not blocked. If the temperature is up to 30 C, it will easily cause the leaf tip of the silver queen to wither.Pay attention to Shading in summer, not to make the light too strong, otherwise it will be prone to sunburn.Pay attention to lighting in the winter room to prevent the light from fading in the lack of light.

2. Do not accumulate water (watering too frequently) in the Queen's basin.Proper watering and spraying water, keeping humidity. There is a saying that the importance of watering can be seen as "not living in water". It can be supplemented by water dehydration, but once the water is stagnant, it is difficult to remedy.

3. Queen SilverGrow rapidlyIf the basin is not given for a long time, the root of the root system is directly reaching the pot wall. In an environment with high temperature and drought or cold weather, it is easy to cause the root apex of the root cause of atrophy and necrosis, which causes it to lose its due absorption function, which will cause the leaf tip to shrink.thereforeIt is necessary to change the basin every two years, and at the same time, it is necessary to carry out regular trimming to maintain a good form.

4. Queen SilverDuring the cultivation, soil quality must choose the Fertilizer soil of ventilation and drainage, such as the carbon soil and the peat soil. Of course, it can also be matched by itself. Add a little sulfate solution to the mixed sandy soil and the soil of the rotten soil for acidification.likeFor the potting of the pots of fruit pots or too sticky, or too much watering, etc., it has caused the rotten rot of the nutritional whisker roots of the Queen of Silver. In this way, the ability to absorb moisture in the root system will be greatly reduced, which will cause the tip of the leaf to blackened, the edge of the edge of the inner song will beEssence

5. The Queen of China is toxic. After the stalk of the silver queen is broken, it will secrete a transparent liquid, giant spicy, better than yellow lantern Pepper, and lasting for a long time.When planting at home, it is necessary to prevent children from breaking the stems and leaves to lick the entrance.

Recommended reading

[Interior Observation Plants] What are the common indoor leaves?Different habits of indoor leaves, different maintenance

[Green Luo] Green Luo's breeding methods and precautions for Green Luo Conservation Knowledge Collection

[Wenzhu] How can we raise the method and precautions for the cultivation method and precautions of Wenzhu to grow more vigorously

[Tiger Pilan] How to raise Tiger Pi Lan's breeding method and precautions

[Fugui bamboo] How to raise rich bambooRich bamboo breeding methods and precautions

[Guangdong Wannian] How to raise a breeding method and precautions for Guangdong Wannianqing in Guangdong Wannian

[Ivyevang] How to raise Ivy's breeding method and precautions for Ivyevo

[Spidering orchids] The breeding method and precautions of spidering orchids in chirling orchids

[Turtle bamboo] How to raise a turtle back bamboo breeding method and precautions for Turtles back bamboo

[Pocket coconut] How to raise pocket coconut breeding methods and precautions for coconut coconut

[iron wire fern] How to raise iron wire fern breeding methods and precautions for iron wire fern

[Beach chair folding chair] How to buy a classified beach chair folding chair of beach chair folding chair

Classification of beach chair folding chair

Beach chair is a category in a Leisure chair.Beach chairs can be divided into cloth beach chairs, leisure beach chairs, Outdoor beach chairs, folding beach chairs, with leather, stainless steel, plastic and other materials. It is a comfortable chair for Outdoor leisure and indoor rest.The production of leisure beach chairs is generally hand -woven. Because it is soft to use, it feels comfortable and generous, has good breathability, and is more and more popular with the owner.Outdoor beach chairs are not only a convenient chair Tool for leisure people, but also a beautiful landscape in the city.

How to buy beach chair folding chair

1. The depth of the beach chair

Generally speaking, in a more formal occasion, people's sitting positions are very straight, and more people like to sit in front of the chair to be "shallow".However, if you are at home, you may sit deeply when you relax, and the whole person seems to be caught in a chair.When buying, you can sit and see first. Try the depth of the whole body when you enter the seat. You can know whether it takes into account the needs of public private.

2. The height of the beach chair foot

The height of the beach chair foot is related to the long legs of the user. Except for the high chair of the chair, the seat height of the general chair will not be too exaggerated, but if there are those with short or young children in the family,Also consider it.

3. The height of the beach chair handrail

If you have a habit of putting your hands on your hands, you may wish to choose a chair with a lower armrest or no armrest.If you like to shrink the whole person in the middle of the chair, then the chair with higher handrails and deep seats is probably the best choice.

4. The height of the back of the beach chair

For those who like "sitting in danger", in addition to choosing a stool without a armrest or back, you can also choose a low -handrail and a low -back chair. At this timeIf the back is leaning on the back, you may choose a chair with a higher back of the back. At this time, you can also see if the height of the back is near the neck, and sometimes the chair near the neck is high.The 90 -degree angle is placed on the back, so it is easy to cause cervical damage.

5. The slope of the beach chair

The slope of the back and the soft comfort of the "additional object" should also be considered.

The slope of the back of the chair is based on 90 degrees. Most chairs are slightly greater than 90 degrees. In this way, people's center of gravity can be slightly backward, and the whole person can sit on the chair steadily.The chair with a large casual function has a larger slope, which makes people look like "lying" on the chair.

6. The softness of the beach chair

Whether the softness of the chair cushion and the back of the back is comfortable. If the chair with a cushion or back is not added, just look at the hardness of the material itself. The "additional part" should pay attention to what the internal filling is used.Essence

7. The stability of the beach chair

Looking at the details of the chair structure, you can know the stability of the chair. The inspection of the joints such as tenon, screws, etc. are very important.It is recommended that when buying, the user should try to sit and see it, and shake the body slightly to experience the stability of the chair.

For the purchase skills of leisure beach chairs, the above are more practical and convenient.Nowadays, the structure of the beach chair and the selection of materials such as materials are similar, and the brand must be guaranteed.The more well -known Outdoor leisure chairs of Zhongtian and Xiyu Lang Saisali. In fact, the purchase of beach chairs does not need to work too hard, just pay more attention to details.

1. How to install the Luya pole

There are two types of Luya poles, the handle and straight handle.The handle is equipped with a stand -up wheel (such as water Drop wheels, small drum wheels), wheels and eyes are above the pole; the straight handle is extended to the wheel, wheels and guides are below the pole.Below the two rod corresponding to the loading method as follows.

1. Straight handle pole

Straight handle rod spinning wheels are online.It is best to put the wheels on the Luya pole, then turn on the wire cup, turn off the inverse switch to start knotting.

Method: Generally, it is tightly tightened to knotting at the top of the line cup, which is similar to the eight -character ring. The remaining heads can be tied to 2 backhand knots.

Groll: Find a wet towel to pinch the pole and line in one hand, and shake the wheels of the other hand to start to wrap the thread until it is wrapped in 9 points.

2. Gun handle pole

The handle rod spinning wheel entanglement line.Try to install on the wheels, and then the online cup around two circles, and the last line head is wrapped around the main line and the line head for 6 times and tightened.

Close line: Put the fish wire plate in the plate, slowly shake the wheels, bring tight lines, and the line to the water Drop wheels on the outer cup of the line.

Pass the main line through the rod guide ring one by one, and finally connect a Luya needle with the eight -character ring. Then you can start fishing with a pseudo -bait to start fishing.

2. How to use Luya pole

Luya fishing is a way to imitate small fish and shrimp to lure big fish attacks.Therefore, the use of Luya pole must first consider the skills of bait.Although Luya's target fish is relatively broad, fishermen should also pay attention to choosing bait according to the habits of the target fish.Generally speaking, after the beginning of the summer, it is suitable to use shrimp -type Luya, and it is best to use insect -type Luya in autumn.

Choose the bait, pay attention to throwing the next step.When throwing Luya into the fishing spots in advance, fishermen should pay attention to controlling the rhythm of the closing line and the line, and make the "dead bait" in the water more realistic.In addition, using Luya fishing, it is best to choose in the morning and evening in two periods. This time is the peak period of the activity of meat -eating fish.

3. precautions for the use of Luya pole

When using the Luya pole, carefully read the instructions or the instructions on the pole body to ensure that the fish line and fake bait meet the marking of the fishing rod.When fishing, try to avoid placing Luya poles on rocks or concrete to avoid damage to the fishing rod.The Luya pole is more fine. When using it, pay attention to avoid scratching the pole.

When saving Luya pole, on the one hand, it is necessary to protect the Luya sturdy barrel and the softer lining. On the other hand, avoid placing Luya pole in a high temperature and humid environment, because such an environmentIt will destroy the internal glass fiber and carbon live plant fiber structure.If it is sea fishing, clean the Fishing rods in a timely manner after the fishing is over to prevent the salt in the seawater from being residual on the fishing rod.