Watching the Backing Boy

Viewing the back of the green pupa is to cultivate small freshwater ornamental fish through the method of selecting, hybridization, purification, etc. of wild green buns. It has a variety of varieties and simple feeding and reproduction. It can also get new performance through various varieties of hybridization and enjoy the joy of creation!The biggest advantage of comparing small tropical fish such as peacocks is that Jinya can also live very comfortably without filtering oxygen -warming equipment, and compared with traditional ornamental fish such as koi goldfish, the small container of the brocade can be served.The effect of group tourism is also first -class. You can make the case of the case to add anger, or you can decorate the scene of the garden pool!

Viewing the morphological characteristics

Observation of the individual of the back green, the body is small, the body is long,3~4CMThe color is gorgeous and varied, and it has extremely high ornamental.The color, body shape, light performance, etc. of each variety, according to the big field Xingxiong2015Annual Publishing Book "Green Big Book" records456A variety.

In terms of body shape, there are ordinary body shape, light body shape, sphere, short body shape, no dorsal fins, eyes, etc.; color in color, brocade; light performance with dry light, starlight, luminous light, snail light, body light, light in the body, light in the body, light in the body, light in the body, light in the body, light in the body, in the body light, light in the body, light in the body, and the light in the body.wait!The combination of various body type characteristics and light performance creates a variety of varieties of viewing back!

Viewing the life habit of Qingyu

Watching the back of the green cricket belongs to the upper layer of fish, omnivorous, mild nature, joyful tourism, easy to raise.Has high salt resistance and low oxygen resistance, rightpHThere is basically no requirement, you can live in0~40The temperature environment, suitable for growth temperature15~30C is extremely sensitive to chemicals.

Play the status quo

Viewing the back of the back originated in Japan. According to Japanese information, Kinji probably appeared in the Edo era in Japan, and the popularity was about nearly one or two years!At present, Japan has the largest feeding ornamental group, the most mature cultivation technology, and a large number of high -quality farming fish!Although the output of the back -to -back green cricket is very high, due to its high elimination rate, the excellent individual price is also high!Soon after the introduction of domestic introduction, there are not much to know, and there are fewer players.

Observation of the main point of breeding back in the back

Watching the back of the green is not high in water temperature and water quality, but can live0~40The temperature environment, suitable for growth temperature15~30.With no filtration and oxygen, the feeding density is per liter of water2~3Tail adult fish, the quality of the water is average3~15Change the water once, change each time1/4~1/2water.Watching back green is relatively complicated. Common live bait includes rich year shrimp, water flea, red worms, etc., which will also eat algae and duckweed in the tank.Feed and grinding koi feed can be feed, feeding every day depending on the situation1~2Second-rate.

generally3The big view of the back of the month has matured and has reproduction.At the temperature reached20Above , it can stabilize the eggs when the light is sufficient, and the egg yield daily2~50about.During the reproduction, wool groups should be placed in the tank to collect eggs, and the eggs on the online group should be picked out every day and moved to small containers such as disposable lunch boxes.During the incubation period, the bad mold eggs are picked out every day, changed the water once, and changes each time1/3~1/2Left and right, incubation time10~15sky.

Earlier in the Earlier2~3mmLong, start to eat after absorbing the yolk after a day or so!Generally, it will be fed with egg yolk, green water, green algae powder, grass tapegers, wheel worms, etc. After about a week, you can use Fengnian shrimp and powder feed normally.

Watching back green Observation method

Observation of the back of the blue cricket is relatively small, which is very suitable for raising with micro -landscape elements. It is a small ornamental fish with a strong ornamental. In addition, the landscape is even more beautiful.If it is a player who has played the grass tank, it is a very simple thing. Just put it in the green cricket. Here you can choose a variety of viewing back green crickets that are suitablevariety.

Those without a grass tank can try tea washed or stone troughs, combined with some aquatic plants, duckweed, miniature water lilies, negative aquatic plants and other plants to decorate the fish tank, suitable for all overlooking varieties, such as Yang Guifei, dry branch, three colors, red and white, red and white, red and white, red and white, red and white, red and whitewait.It is also beautiful with a piece of water absorption stone and planting stone plants.

What are the varieties of viewing back green?

1. Optical variety

The appearance of the optical system is the surface of the body with light, which is very shining in the sun. The most common variety is the dry branch and the most classic variety. This light is not the fluorescence of artificial gene injection seen in the market.It is a variety of genetic orientation of genetic orientation of nature.Usually the quality of the optical system can be observed to identify the length of the back light.

The back light of the dry branch is generally collectively referred to as"Dry Zhiguang", because the dry branch itself is a big product.In addition to dry light, there are many varieties of the optical system, such as the Xinghe, and the light of the Xinghe is the starlight (the highlights of the stars on the side), the hundred types of (body light), the polar dragon (double -colored dry branch light) and so on.

Therefore, the variety performance is outstanding"Light" is summarized as the light system.

Second, monochrome variety

Monochrome varieties are the easiest to identify. As the name suggests, the body color is a single color of a single color. The common varieties are Yang Guifei (red), pure white (white), big snake (black), etc.

Therefore, the varieties of the variety highlight the deep and thickness of the color are summarized into monochrome.

Third, the brocade variety

The identification of the brocade species is that the body color is more than two or more colors and the normal body shape. The common varieties are red and white brocade, three -color brocade (red tiger, Zhu Baihu, Yunzhou), emperor, etc.

Among them, it is worth mentioning that due to the variety of color and different distribution, the centered species are also a large product, such as the red and white brocade, red and white, red and white, and the yarn system.RANNIRed and white and so on.There are more three colors, such as Zhu Baihu, Yunzhou San color, Qianjin, Sanada, etc.

Fourth, the combination system variety

Then the variety of the combination system is the optical systemThe performance of the brocade variety can also be said to be the combination of Guangjin.Such as three -color starlight (black and white red body colorStarlight),kabuki(Kabuki) and so on.

5. Other varieties

This type of blue catfish neither from color identification nor the expression of lightness is summarized from the particularity of the body.

If it shows short bodiesObjective panda green cricket;

The long -fin dried branches with long fins;

The eyes are like the goldfish's look of the sky;

There is also a green puppet with water;

Black -eyed panda Yang Guifei

What do you eat to watch the blue catfish seedlings?

The fry of the fry from the ovulation is very small. Many novice friends are worried that the small seedlings will hang up without food supplements. In fact, it is a bit worried. Under normal conditions, the fry is actually eating when the fish is broken when it breaks the eggs (absorbing yolk).In the environment of water3-7It's okay not to feed.

After that, you have to prepare the food you eat.The following foods suitable for fish fry are:

1)yolk

Boil the egg water, take the egg yolk, and dry it into powder to feed the fish fry.Pay attention not to feed too much at a time, so as not to finish eating but bad water.

2) Powder feed

This type of feed can be purchased. Common brands include Riqing and Dong Wan, and some players are also good for the powder of gorgeos. It is not recommended to use sparrow powder here. It is too bad and the smell is relatively heavy.

3) Green water

Players with green water can directly put the fish fry in the green water tank. Green water is rich in microorganisms to meet the needs of fry development.

4) Fengnian Shrimp

There is no one. The newly -hatred shrimp is the best food for these small ornamental fish. Because it is a living feed, it can also promote the response of fish activity.After the seedlings are used, they are both0.5cmabove.

fish breeding environment

1) Light sufficient light

The fry is particularly active under sufficient light, so appetite is better.

2) The appropriate water body size

The water bodies with seedlings should not be too large or too small. If they are large, they will not eat and eat it. Instead, the water is not enough. The amount of soluble oxygen is not enough. It is prone to hypoxia or delay.good.

3) Keep water quality

Diligence changing water not only makes the water body clean, but also a good way to manually stimulate fish seedlings.

The birth season of fish fry is generally the end of spring-At the end of autumn, the fish fry is generally warm5-10You can eat Fengnian Shrimp,1-2A month is Yacheng.3After a month, the fish began to mature.

Pay attention to the renovation of the sunrise house on the top floor

1. Building Materials selection

The rules and model selection of Steel Structure materials must be fully taken into account factors such as the location, the height of the ground, and the orientation of the ground.Lightning protection, the current building is fully implemented. Generally, there is no lightning strike. Everyone is easy to ignore. On the top floor, you must consider the lightning.The top glass is cleaned. The city in my country is large. It is not transparent to the glass top of the sun room in a few days. It is critical to clean it. It is recommended to open a few skylights on the top surface.Based on load -bearing capacity.There are many aspects such as wind pressure and steel structures in the process of long -term use.Select the steel lining that meets the strength requirements.Steel Structure processing: According to the stress condition of the material.Ensure firm welding.To do a good job of rust, it is recommended to use high -temperature shaping or Outdoor iron to use boiling carbon paint.

2. Anti -rust treatment

glass: The top material is generally tempered glass, including single -layer tempered glass, hollow tempered glass, and safety glass of tempered glue.The roof is fine at the top floor, but if the top floor is built, it will be dangerous if it is too high. Many companies are unwilling to make the top -level sun room too high.Safety, especially top doors and windows.

What are the issues to pay attention to in the transformation of sun room?How to build a sun room on the top of the building is safe?Note at 2 o'clock.It is recommended that you prepare the preliminary preparations of the sun room. The two steps for selection and rust removal. Even if you succeed in the sun room, you can do the best Sunshine room life experience!

precautions for decoration

1. Overdog

For top -level real estate with strong lighting capacity, it is also one of the necessary steps to properly improve the lighting capacity of the room.It is recommended that you set up a sunshine that can be opened and closed outside the main lighting window;;Use curtains with strong shielding effects or laid insulation film on the glass in summer.This is a very necessary decoration method for west -to -high real estate.

2. waterproof

The most prone to the top -level property on top surface waterproof problems.If your home decoration is high and the requirements for decoration are higher.Then it is recommended that you simply spend a thorough maintenance of the waterproof on the roof and conduct a detailed inspection once a year.In this way, you can basically ensure that the indoor decoration is not destroyed by the top surface.

3. Insulation

The insulation performance of the top -level real estate is mostly weaker than the real estate on other floors. Therefore, when renovating the top -level real estate, you should pay attention to the thermal insulation capacity of the house: It is generally recommended that you use the insulation methods such as high -quality doors, windows and indoor soft Bags to create a one for yourself for yourself.winter warm and cool in summer, comfortable indoor living environment.

4. Wind -proof

The house on the top of the building also needs to be windproof.summer storms, so doors and windows must strengthen their firmness.In winter, the wind is Bone, and the windshield needs to be considered.

1. Is it necessary to buy Outdoor tables and chairs?

Outdoor tables and chairs, as the name suggests, are tables and chairs used outdoors. It is different from ordinary home tables and chairs. It is mainly used outdoors. There are some differences in materials and styles. So is it necessary for families to buy Outdoor tables and chairs?

Generally speaking, whether to buy Outdoor tables and chairs mainly depends on the actual needs of the family. Families in the following two situations can consider buying Outdoor tables and chairs:

1. Family with yard at home

Most of the people living in the city are commercial houses, but if it is a self -built house or a villa with a yard, you can consider buying a set of Outdoor tables and chairs in the yard. Usually, the wind and rain do not have to feel bad.Friends drinking tea and chatting, the busyness and fatigue in life have diluted a lot.

2. Families of frequent outdoor activities

Some families prefer outdoor activities, such as Outdoor Camping, etc. This situation can also be purchased Outdoor tables and chairs. It is generally recommended to buy folding Outdoor tables and chairs for easy carry.It is convenient to play games or dine.

If there is no relevant needs, there is no need to buy Outdoor tables and chairs. After all, Outdoor tables and chairs are compared to ordinary tables and chairs used in indoor, because considering Outdoor use, the cost is higher and the price is more expensive.

2. Where can I sell Outdoor tables and chairs

With the continuous development of society, many Outdoor leisure activities have become an important part of people's lives. If often outdoor activities, you can buy a set of Outdoor tables and chairs. So where can I buy Outdoor tables and chairs?

Outdoor tables and chairs belong to the category of Outdoor Furniture. Generally, they can be bought in Outdoor goods stores or furniture cities; if there are no such shops nearby or you can't buy what you want, you can also consider buying online. Now online shopping is very developed and very developed and very very developed.It is convenient, but there may be some Outdoor tables and chairs for online shopping, which is slightly troublesome.

3. How much is a set of Outdoor tables and chairs

The price of Outdoor tables and chairs is high or low. Generally, according to the brand, size specifications, materials, styles, quantities, performance, etc., simple sets of Outdoor folding tables and chairs of one table, two chairs, are about 80 or ninety.It is about one or two hundred yuan a set, and the larger Outdoor tables and chairs are more expensive, ranging from hundreds of yuan to thousands of yuan.(The above price source network is for reference only)

Profile

iron wire fern, a family of Phoenix Fern, has a perennial herb, 0.1-0.6 meters high.Because its stems are slender and color -like, they are named iron wire fern.iron fern is a common indoor greening plant and can also be used as an indicator of calcium soil.Because of its fear of dryness and strong light, it must be placed in a place without direct sunlight for maintenance.

There are about 200 kinds of iron wire fern, which is a famous ornamental ferns.There are about 30 species in my country.The main ornamental species include whip leaf iron wire fern, Tuanyu iron wire fern, fan leaf iron wire fern, palm leaf iron wire fern, gray -back iron wire fern, white -back iron wire fern, etc.Railway fern native tropical and subtropicals, widely distributed around the world.It is widely set in Taiwan, Fujian, Guangdong, Guangxi, Hunan, Hubei and other places.Sex is warm and humid and semi -yin environment,Often born inAltitude 100-2800 metersflowIt is more common on the limestone or the bottom of the limestone cave and on the wall of the limestone cave beside the water stream.Avoid strong light.The suitable temperature temperature is 18 25 .

Nickname

Filtic grass, girl's hair, iron wire, water pig hair soil

variety

1. Fan blade iron wire fern

The leaves are the wide ovate that is not neat, and the palm -like branches of the palm -shaped branches are 2 to 3 times.Fan blade iron line fern likes the sun with sufficient sunlight, suitable for growing in acidic red and yellow soil.

2,Whip iron wire fern

Also known as Gang Mao iron wire fern, leaf -shaped lanceolate, about 10-25 cm long, the top is extended into a whip -shaped, rooting at the ground.The whip iron wire fern was born under the forest or valley stone seams of 100-1200m altitude.

3. Wedge leaf iron wire fern

The leaves are triangular, with feather -like split, and the cracks are diamond or long.Wedgeflower wire fern is often born on the limestone beside the flowing water stream or the bottom of the limestone cave and the wall of dripping rocks, and the altitude is 100-2800 meters.

4,Ruffled iron wire fern

The lotus leaf iron line fern is a relatively rare variety. Due to the destruction of nature by human production activities, the environment that it depends on the survival no longer exists.Because the ruffled iron wire fern is a better medicinal material, excessively excavated, making it on the edge of the extinction, and the amount of cultivation is small.

Morphology

The plant height is 15-40 cm.Ye Yuansheng or near life, the veins are more forks, and the edges are directly on the edge, both of which are obvious on both sides.The leaf veins are available to the two digo bifurcation, and the edges are directly on the edge, both sides are obvious.After the leaves are dried, the grass is thin, grass -green or brown -green, and both sides are not hairless. The leaf shafts, each back of the feather shaft and the small feather handle are the same color as the petiole, and often twists and turns from left and right.The rhizomes are long and horizontal, and the brown lanceolate is densely sideways.

The handle is 5-20 cm long, about 1 mm thick, slender, shiny, luster, the base is the same scales as the root stems, Smooth upward, ovate triangle, 10-25 cm long, 8-16 cm wide, 8-16 cm wide, Polymark, wedge-shaped base, most of the middle part of the middle is two feathers, and the middle and above are a strange number of feathers.Large, 4.5-9 cm long, 2.5-4 cm wide, long round ovate, round blunt head, once (two less) strange numbers, 2-4 pairs of late small feathers on the side, alternate, obliquely upward upwards, 6-15 mm apart, the size is equal or the base is slightly larger, the symmetrical or asymmetrical oblique fan-shaped or nearly oblique Square, the length is 1.2-2 cm, the width is 1-1.5 cm, the upper edge is round, with 2-4 2-4Shallow or deep crack into strip -shaped cracks, the apex of the infertile fissure, the small jagged or corrosive small teeth with a wide triangle, which can cultivate the cracks.There are small tooth-like teeth on the side, which are full on both sides.It is often larger than the side-raybal tablets under it, with a handle of 1 cm; the second pair of feathers are 2.5-5 cm away from the base, and each pair is the same as a pair of feathers at the base and gradually becomes smaller.

3-10 pieces per feather tablets per feathering, bleled from the upper edge of the last small feather tablets that can be nurtured; the flocks cover the long shape and the kidney form a round kidney shape.Membrane quality, fullness, staying.The spores are covered with coarse particles, which are often preserved after treatment.

Suitable place

Xiyin, strong adaptability, easy cultivation, suitable for indoor potted viewing.Small potted plants can be placed on the head of the case and coffee table; large potted plants can be used to arrange the window sills, aisles or living rooms of the shade room.iron fern leaves are also good cutting materials and dried flower materials.

Effectiveness and role

Viewing value

The stems and leaves of the iron wire fern are very beautiful. It is suitable for planting in rockery or gardens. It can also be made into potted plants on the balcony or window sill and in the corridor to watch.Cut the flowers for humans to place them at will.

Purify the air

The iron wire fern can purify the indoor air, absorb the harmful gases to the human body, and place it in the bedroom that is conducive to relaxation and improve sleep quality.According to research, iron wire fern can absorb 20 micrograms of formaldehyde per hour. Some people call it the most effective biological "purifier".Therefore, those who deal with paint and paint all day, or like smoking, can put a few pots of iron wire fern at home to absorb the harmful gases, and can also absorb the dickyne and toluene released by the computer and printers.

Medicinal effect

Don't look at the iron wire fern is just a pile of useless leaves. It can have antiprobium, active, relieve heat, stop bleeding, and give birth muscle.Topical treatment of bruises, fractures and bleeding, internal treatment to treat rheumatism and Bone pain, numb hands and feet, urinary tract infection, etc., have a good effect on influenza, cough, burns, snake bite, and snake bite.

Breeding method

illumination

Although the iron wire fern is a yin -ray plant, it requires a certain amount of light in the growth season.During the indoor maintenance, it is best to put it on the east or north, and its light level is ideal.

Seeping shade in the summer at noon, appropriate light in the morning and evening, and too strong light will make the iron line fern leaves zoom.If it is cultivated on the Outdoor balcony, shaded shades at noon at noon in the four seasons, so as not to burn yellow.

Humidity/watering

The iron wire fern likes a warm and semi -overcast environment. Pour water once a day during the growth period. It is hotter in summer. Pour water once every morning and evening. At the same time, sprinkle water around the leaf surface and the pots of pots to improve the humidity of the air and keep the leaves green.If there is no one in the family, you can put the Flower pot on a humid sand table, make up for the water, and water it once every 2 to 3 days.

When the temperature in the end of autumn, winter and early spring is low, the pot soil should be moist, so that the surface of the pot soil can not be dried.

temperature

The temperature of the iron wire fern is 15-20 C, and the temperature in winter can not be kept green without less than 5 C.In midsummer, if the temperature is too high, you need to spray the plant every day to increase the air humidity and cool down.

soil

iron wire fern likes loose and fertile lime soil. Families can be used: garden soil, leaf soil and sand, and mixes according to the ratio of 4: 5: 1.If you want to grow well, you can sprinkle lime powder in the pot soil to increase calcium.

Fertilize

iron wire fern is fed, but the demand for Fertilizers is not large.spring, summer and autumn are for its growth season, and apply thin liquid Fertilizer once every 30 days.Sulfur sulfur sulfur solution can be poured 2 to 3 times per month.Pay attention to proper calcium Fertilizer, so that the growth of iron wire fern will be better.summer temperature is high, minimize fertilization.The temperature of autumn gradually decreased, and in mid -October, the fat gradually stopped.

Pay attention to fertilizing, apply a thin -mouth watering pot to slowly apply along the pot. Do not let the Fertilizer stick on the leaves, otherwise it will easily burn the blades and affect the ornamental effect.

Frequently problem handling

Way of breeding

1. Substitute breeding

iron wire fern is usually breed in divisions, so as to maintain the nature of the parent.Generally, when the basin is changed in April of the following year, the size of the plant can be divided into or one in three to cultivate depending on the size of the mother plant.In addition, once the mature spores are scattered in the humid soil, it will also develop into a seedling. When it grows up, it will become a new plant.

It is available in the four seasons in the room, but it is generally carried out in early spring.Take the mother plant out of the pot, cut off the roots, so that each piece with part of the rhizomes and blades, and then plant them in small pots.The mixed soil is covered around the rhizomes, and the new plants can be obtained in the wet environment after irrigation.

2,Spore breeding

Put the peat and fine sand with the matrix in the oven high -temperature disinfection to kill germs and weed seeds.Then, put the disinfected soil in a shallow pot.Cut the leaves with mature spores, concentrate spores and sprinkle them in a shallow basin evenly, do not need to cover the soil, cover the glass slices on it, soak the water from the bottom of the pot, keep the pot soil moist, and place it in the semi -yin environment at 20 ~ 25 C.In the following, the spores of about 1 month can germinate into the original leaf body, and it can be divided into planting after full pot.Note that 1 to 2 days before the planting should be moved to the glass on the pot to breathe, so as not to cause plant rot or pests.In addition, spores are prone to spores in warm and damp environments.

Fast growth, change the basin every spring, add a small amount of brick dandruff and wood ash powder with rotten soil.During the growth period, it is necessary to water and spray water.After fertilizing once every half a month, you can choose Huiyou 15-15-30 pot flower Fertilizer.When fertilizing, the Fertilizer should not tarnish the leaves.Avoid strong light in summer, so as not to cause the leaves of the leaf margin and move to indoor maintenance in winter.

Fertilizer management

The iron wire fern is wet, and the peak growth season should be fully watered. In addition to maintaining the wet hole of the pot soil, pay attention to the high air humidity, and sprinkle water around the plant when the air is dry.Especially in summer, water is poured 1-2 times a day.

Water is wet and wet when the pot soil is wet, which can easily make the leaves yellow.Apply 2-3 thin liquid Fertilizers 2-3 times a month. Do not stick to the leaves when fertilizing, so as not to cause rotten leaves. Out of the calcium habits of iron wire fern, the pot soil should be added with an appropriate amount of lime and broken eggshell.It will be better.Reduce watering in winter and stop fertilization.

Diseases and insect prevention

There are mainly leaf blight hazards. In the early stage of the onset, spraying Bordeaux was sprayed 1 to 2 to prevent control.Pests have garaphs, and can be sprayed with 1500 times liquid of 50%malaxylum phosphorus, or 2.5%semramlly.

Leaves brown coke

The brown coke is the most prone to iron line fern leaves, which is often encountered in cultivation.The iron line fern was originally born in the wet wall seam or stone surface, which is the most dampness.Due to the strong light in summer, if the iron wire fern is not placed in a shade environment, it cannot grow normally.The direct sunlight will quickly steam the water of the leaves, and the water has not been used to absorb the water. Some of the cells of the leaves have been dehydrated, and the green will gradually fade, so that the focus will appear.

Rescue measures:

It must be cultivated immediately.

Cut the scorched leaves and spray water in time on the leaves and the surrounding ground.

Take care of it and try to avoid being stimulated by strong light again.

Black leaves

Due to improper maintenance of iron wire fern, the leaves are often dark.The reasons and prevention measures:

The temperature in winter is low, and the frost damage of late cream or early cream.The iron line fern has a warm and humid climate, which is not cold -resistant. The suitable growth temperature is 15 ~ 24 C. If the temperature room temperature is above 10 C or more, the leaves can be kept green.

Too shadow, no sunlight for a long time.The iron wire fern is afraid of the heat and cannot be exposed in the sun, but it cannot be shaded. It is best to put it under the Outdoor shade and tree in summer, or move outdoors at night, and move back to the room during the day.winter should be fully seen.

summer climate is sweltering and poor ventilation.Raise air humidity and strengthen ventilation.

Fat and water problem.The iron line fern is rich in humus, which requires sufficient fertility.Can be added to the cultivation soil to add charcoal powder and brick dandruff to improve the permeable water permeability of the pot soil. The pot soil should be wet.

precautions

1. Rizhao: Although it seems that the indoor light is not too dark, the general indoor light is still slightly darker for the iron wire fern, so it is best to place it in a bright place in the room.

2,Temperature: iron wire fern likes cold climate. The growth temperature is between 15 C and 25 C. The temperature of the leaves cannot be lower than 7 C, otherwise it may have frostbite the leaves.

3. Moisture: iron wire fern is very like a high -humidity environment, so in the three seasons of spring, summer and autumn, should be watered 4 to 5 times a day.

4,Fertilization: Fertilization is necessary for iron wire fern, but grasping the principle of "a small amount of more", and use 1000 to 2000 times the diluted solution with flower treasures.

In addition, if you want to raise iron wire fern in your family, you should still do the following:

The iron wire fern likes warm and humid and half -cold environment, and hate the direct sunlight.

Fern plants grow in a humid environment. For iron wire fern, naturally, it is no exception.

You need to change the basin once a year, while trimming the dry leaves and old roots.

Recommended reading

[Interior Observation Plants] What are the common indoor leaves?Different habits of indoor leaves, different maintenance

[Green Luo] Green Luo's breeding methods and precautions for Green Luo Conservation Knowledge Collection

[Wenzhu] How can we raise the method and precautions for the cultivation method and precautions of Wenzhu to grow more vigorously

[Tiger Pilan] How to raise Tiger Pi Lan's breeding method and precautions

[Rich bamboo] How to raise wealthy bamboo breeding methods and precautions for wealth bamboo

[Queen Yin Queen] How to raise the Yin Queen's breeding method and precautions

[Guangdong Wannian] How to raise a breeding method and precautions for Guangdong Wannianqing in Guangdong Wannian

[Ivyevang] How to raise Ivy's breeding method and precautions for Ivyevo

[Spidering orchids] The breeding method and precautions of spidering orchids in chirling orchids

[Turtle bamboo] How to raise a turtle back bamboo breeding method and precautions for Turtles back bamboo

Pocket coconut How to raise pocket coconutsThe breeding method and precautions of pocket coconut coconut

bamboo rattan is the same natural material as wood.Although they are two different types of materials, they have many common features in materials.Many of them are the same in processing and structure, and can be used together.bamboo is hard and strong.The surface of the rattan is Smooth, tough, elastic, soft and elegant.bamboo or rattan can be used alone or combined with wood, metal and other materials.Ordinary bamboo rattan furniture includes round bamboo furniture and vine furniture. Its structure is relatively the same, usually divided into two parts: skeleton and surface layer.

1. Choices of bamboo and rattan raw materials

There are many types of vines, known600The species, among them, the most commonly used in Miru, red vine, sand, and Badan vine.The thickness of the Badan vine and sand is generally uniform, which is a good material for making vine chairs. The flexibility of Rito is very good, and it is an indispensable raw material for making disk flowers.

2. Machining tools for bamboo vines

This isIt is often used when making bamboo and vine furnituretools: Warbers, high -pressure air cooling guns, operating desk.The setting of the operating table is relatively simple, but it is a lot of use. It is the main Tool for vines.There are on the operating table2The diameter is respectively8Cm25The iron -shaped cylindrical body of the cm is fixed on it, and the distance between the two iron cylinders is10CM.The process of our curved vines was done on this operating table.

Third, bamboo and rattan raw material grinding

The surface of the rattan is relatively rough, and it is a piercing plant, so when making it, the raw materials must be carried out"Practicing" treatment.This kind of polishing machine Tool is a Tool for grinding the raw materials of the vine, mainly using the sag and the grinding wheel to polish.The polishing should be divided into two times to complete, once it is polished, and the other is finely polishing.

The first step is rough

Roughly polishing, using80The type of coarse Belt; placed the rattan between the grinding machine and the grinding wheels, and slightly forceful to make the surface of the rattan basically Smooth.

Step in the second step

After the first round of polishing, the surface of the rattan was already much Smooth, but it was still slightly rough. At this time, the second round of fine polishing was needed.Now we use this180Follow the fine sofa Belt again,180sofa Belt ratio80The type of sand band is thinner, so that the grinding vines will be smoother.

Fourth, bamboo vine furniture manufacturing process

Skeleton: Types of the structure of the skeleton.

The skeleton of bamboo and vine furniture is mainly made of bamboo raft and thick vines.It has a strong anti -frustration, elasticity, easy bending, simple structure, and beautiful appearance.There are four types of skeletons:1All of them are composed of bamboo or rattan.2It consists of bamboo and vine, which can make full use of the characteristics of the material and easy to process.3Metal frames, weaving sitting and back on the frame.4A wooden frame, woven the seat and back on the frame.

The method of connecting the skeleton.There are three basic methods to join the bamboo vine frame.

1, Bending method.There are two methods of curved bamboo vine materials: one is a bending method, with a small diameter of bending.The other is a razor bending method with a large diameter, that is, a part of the curved part is dug out to form a concave for bending.The small curvature method applied to the frame bending is to dig a small part on the curved part, hold another bamboo vine material, and use bamboo needles to nail on one side of the curved side to prevent sliding.

2, Entangled.Also known as vine leather entanglement, it is the most common structural method commonly used in bamboo and vine furniture.The main feature is that in the connection part, it is entangled with the rattan leather, and the bamboo frame should be perforated on the link first.The rattan frame should be nailed together, and then the fragments are entangled with the rattan.There are three entanglement methods based on their part: one is for two or more entanglement.The other is to tie the two strips in the direction of each other, and they are divided into curved entanglement.Joint joints are connected to the broken.Each is connected in the middle part and is used in the middle part of the two rods in the horizontal direction.In addition, a single bar has rattan Skin to enhance the touch and decoration.

3Covering method.This is a unique combination of bamboo furniture.It is used to connect two different diameter bamboo rafts and make holes in the large bamboo Tube.Then, insert a suitable small bamboo Tube and lock it with bamboo nails.Scattered on wooden boards or vines.