1. What is the structure composition of the fishing rod

1.

An ordinary fishing rod is composed of a number of hollow matching sections. When not in use, it is embedded and put away.The thinnest section of the matching section of the fishing rod is called section 1; from the inside to the outside, that is, from fine to thick, it is pushed in section 2 and No. 3 ...

2, pole hat

Under the contraction of the fishing rod, accessories are used to block, fix or protect the eyes.Big rods and sea rods generally include hats: direct protection caps, triangular hats, and quilted Fishing rods, etc. The colors are transparent, translucent, black and gun smoke color.

3. Direction eye

The guidance eye is also called the wire ring and the conductor. It is an accessory specially used to take the fish wire. It is an essential accessory for Bijia fishing, sea fishing, and boat rods.The guide ring requires high strength, small friction resistance, good thermal conductivity, and consistent with the fishing of the fishing rod.The general guide ring consists of a bracket and a wire ring. The bracket material is stainless steel, which requires not rust and cannot be too soft. The wire ring material is mostly ceramic ring and silicon carbide.

4, wheel seat

Also called the card seat, it is a special accessory for fixing the Fish wire wheel on the fishing rod.There are two main types, one is a Tube wheel seat, the other is a plate -shaped wheel seat, the former is used for ordinary sea Fishing rods, and the latter is mainly used for the rock Fishing rods.

5. Holder

Also calling the handle or the handle, it is the accessories that have been grasped in the hand during the fishing process.The hand pole is generally a cotton line, nylon thread, or glue handle. Generally, it is preferred to prevent pollution and anti -slip.

How to assemble the fishing rod

First, before assembling the fishing rod, we need to prepare the required materials and tools.Generally speaking, the assembly of the fishing rod requires the use of fish rods, fish lines, Fish hooks, floats, lead and other accessories.In addition, a fish wire scissors, a fine screwdriver and some small screws need to be prepared.

In the first step, we need to pass the fish wire through the rack ring of the fishing rod.The wire ring is divided into different sizes. We need to choose the appropriate wire ring based on the type of fishing rod and the types of fishing.Start through the wire rings at the bottom of the fishing rod, and gradually pass through every wire ring until the top.Note that when passing through the wire ring, keep the fish wire Smooth and avoid crossing or tangling.

The second step is to fix the end of the fish wire on the roll wheel at the top of the fishing rod.The rolling wheel is a device at the top of the fishing rod, which is used to collect the fish wire.We need to fix the fish wire in the fixed holes on the roll wheel and tighten it gently with a screwdriver.After fixing the fish line, you can gently pull the fish line to check whether it is fixed.

The third step is to assemble the other accessories of the fishing rod.As needed, you can add floats, lead or other decorations to the fish line.The float is used to control the floating of the fish wire, and the lead pendant is used to increase the weight of the fish hook and help the fish hook sink to the appropriate position.When assembling these accessories on the fishing rod, you need to pay attention to the fixing method of each accessory to ensure that it is firm and reliable.

Finally, we need to check the assembly effect of the entire fishing rod.You can shake the fishing rod gently and check if there is a loose or unstable place.If so, you can use a fine screwdriver to fix it.At the same time, you can also pull the fish line to check whether it is Smooth and unobstructed.If you find a tangled or stuck, you can use the fish wire scissors to trim the excess fish line to ensure the Smooth fish line.

How about Da Yiwa fishing rod

Dayi Watt began in Japan in 1945. The well -known (famous) Fishing gear brand, Da Yifa's superb skills have always been known in the industry. It is the first brand in the world to add graphite to the fishing wheel. In 1965The aerospace technology engineering has joined the fishing Ship, and the waterproof and dustproof are first -class and excellent!

The Fishing gear produced by Dayiwa is regarded by the vast number of fishing enthusiasts around the world as the best of the dream. sales outlets and production plants are all over the world.Gentle and other.

How to choose a fishing rod

1. The carbon content of the fishing rod

How much talca rods are marked with T, 24T, 30T, or even 45T, etc. In short, it is carbon content. The higher the number, the higher the carbon content.EssenceThe higher the T value, the lighter and straight the fishing rod, but more brittle.Therefore, other materials need to be added during the production process of the fishing rod to enhance the elasticity and toughness of the fishing rod.Other materials are put in a lot, and the Fishing rods must be soft and heavy, so choosing a fishing rod is not suitable for high carbon seats.

2. The tone of the fishing rod

The tone of the fishing rod is whether the pole we usually say is soft or hard. In popular terms, it is where the fishing rod is bent. The closer the distance is, the harder it is.According to the description of the tonnage of the carbon cloth above, the harder the Fish rod should be, the greater.However, the choice of Fishing rods depends on the water environment and fishing species. Generally speaking, fishing fish and small fish are the best. The most classic is black pits. You must use a hard pole.

3. The feel of the fishing rod

Choosing a fishing rod is not as lighter and better, it feels light in your hand.The center of gravity is low.Therefore, in order to be strong, some Fishing rods will be made of solid. This kind of fishing rod fishing is still very suitable.

True and false disagreement method of Da Yiwa Fish rod

1. The gap between high imitation Fishing rods and genuine Fishing rods is very large. Generally, imitation goods appear on high -end products. High -end products are often made of high -tonnage carbon cloth.Secondly, the high -tonnage carbon cloth (Japan is limited to high -tonnage carbon cloth exports), so it is often used with low -tonnage carbon cloth charging, which causes the imitation goods to be poor, and also causes the imitation goods to lack the waist force during the fishing process.Although the brand factors also occupy a considerable part of the price of Fishing rods, the real fishermen, especially those who are engaged in competitive fishing, choose the fishing rod to choose from the actual performance of the fishing rod.

2. Pay attention to observe whether there are scratches on the body of the rod, and then touch it on the fishing rod with your hands to check whether there is a drum or concave place in the fishing rod.This inspection is the key to the quality of the fishing rod, must not be sloppy.If you find this kind of drums or recessed Fishing rods in a brand, it should be included in its own blacklist within a certain period of time, because it has a defect in craftsmanship and should be unqualified products.

3. Check the interface, extend each fishing rod, and then check the gap between each interface. The gap at the interface should be within 20 wires.Choose this kind of pole again.

4. Understand the back of the fishing rod and take out each fishing rod one by one. First, observe the two ends of each section to observe whether the wall thickness is uniform. If the thin thickness is uneven, then you must be sorry.Then check the inner wall of the fishing rod on the backlight. The inner wall must be glory. The interface of the rolling is not seen. If the interface or stubble occurs, you should immediately abandon these poles.

Recommended & gt; & gt;

1. What is the price of Fishing rods?

The price of Fishing rods ranges from dozens to thousands of yuan. The quality and raw materials of the Fishing rods at different prices are different. The following specifically introduces several fish rods of different prices:

At 100-300 yuan fishing rod, the carbon content is greatly improved.Most of the merchants sold are some small brands.The fishing rod is relatively strong, but the production is rough.

The 300-500 fishing rod is basically high-carbon cloth, and it is also a fishing rod often used by many fishermen. It is more suitable for novices.

500-1000 Fishing rods, the starting price of some big brands of Fishing rods is about at this price, and many of the carbon cloths used are imported.These Fishing rods are relatively stiff and feel good.

The fishing rod of more than 1,000 yuan is better. Most of them are long poles of fishing.If it is a short pole, I think it is very expensive, and the cost performance is not high.

The price mentioned above refers to a short pole of 4.5 meters, and the price of different sizes is different.For example, a fishing rod, 4.5 meters at 500 yuan, 7.2 meters long rods are seven or eight hundred yuan.

2. How to choose a fishing rod

1. Look at the price of Fishing rods

The expensive fishing rod has invested more in terms of cost and workmanship, and the natural price will be very expensive, and those who are cheap will not invest so much, and the cost reduction will become lower.It is recommended that novices start with cheap ones, because they have no fishing experience, and they can easily damage the fishing rod. Even if some aspects are not enough, they can catch fish.

2. Look at the size of the fishing rod

Many new fishermen, when they learn fishing in the early days, they start with a long -range fishing rod. They are called a tiger and prestige by the river. As a result, they did nt throw them out a few times, or they were tired and threw the house to eat ash!This is the blind manner of first learning fishing. The longer the fishing rod size is always, the more fish, the greater the fish. As a result, the operating strength of its own operation.Generally, the novice period does not need to be too long. There are not so many big fish in the river. If there are small rivers around, the fishing rod is enough to start between 3.6 and 5.4 meters, mainly to choose a short rod.

3. Look at the material of the fishing rod

Most of the Fishing rods are carbon fiber and glass fiber material. The carbon fiber has high strength. The Fishing rods are relatively light, but it also has disadvantages, which is very crispy.The weight of glass fiber Fishing rods will be slightly heavier, but it is very durable and practical.It is best not to choose a high -carbon pole in the novice period.It is recommended that glass fiber or carbon wrap rods. The price is not high. Although the weight of the same size will be heavier than pure carbon, it is not a problem for leisure wild fishing to fish for several years.

4. Look at the hardware of the fishing rod

The hard and hard choice of Fishing rods mainly depends on the fishing environment. Do you go to black pits or go fishing or leisure and wild fishing. These two are related to the choice of hard and hard and hard and hard fishing for Fishing rods.

5. Look at the brand of Fishing rods

The fishing rod brand should try to choose those old brands with high popularity. The product foundation of the old brand cannot be done by many new brands. Their low -end products may be better than the high -end product of the new brand.New difference.

How to check the authenticity of Hua's fishing rod

1, Scan code query

Hua's Fishing rods and floats will stick anti -counterfeiting labels on the product.Take fishing rod as an example.You can see the complete QR code and anti -counterfeiting code when scraping the coating on the anti -counterfeiting label.When the first loses of the anti -pseudo code or scan the QR code query, the official WeChatThe "Hua's fishing Tackle Service Number" will obtain the authority of geographical location. If there is no prompt or no geographical location, it is considered a counterfeit.Confirm whether the product number and anti -counterfeit code correspond to the product number and the anti -counterfeiting code.

2Code query

WeChat search and follow the public account"Hua's fishing Tackle Service Number" Click the menu below [Anti -counterfeiting inquiry] can also scan or enter the anti -counterfeit code for query.The inquiries of the inquiries show that the interface is displayed in the same interface as the scanning query results.

True and false distallation of Hua's fishing rod

1,Trademark

Look at the trademarks printed on the body, see if it is clear, the picture is blurred, if the handwriting is rough, the pattern is blurred, and the boundary line is unclear. Most of them are inferior products.

2,work

Most of the Fishing rods are relatively fine. First of all, the appearance of the lacquer is not Smooth, and the pattern is fine and not delicate.

3, Blocked and tail

The blocking of the pole and the tail tail plug are not exquisite enough, and the rear tail pole is not uniform.

4Venture

After pulling out the pole, there is no air pressure. If some are more fine, seal well, and the wall of the Tube is uniform between each section.

5, Can't stand up to the waist

After the whole pole is pulled out, the pole can not stand up. If there is some bending in the first quarter, it is1.9Tune, fishing fish is better to lift the pole, if you bend backwards2.8You can also catch catfish or3.7fishing, fishing catfish is more practical.

6, Balance

Try the balance of Hua's Fishing rods. If the center of gravity is not tired for a long time, by the way, it will catch the loaded mineral water slightly in the pole. Try the flexibility.

7Listen to the sound

Hold the middle of the pole with one index finger and thumb, and use the finger or index finger to play the Tube wall with the other hand, and you will hear different sounds.The general rule is that the better the solidification, the better the overallness, the stronger the sound, the more crispy, and vice versa.Hua's fishing rod product Daquan & gt; & gt;

1. What is the relationship between the tone and hardness of the fishing rod

The common hardness (H) of Fishing rods is marked with about 3H, 3.5H, 4H, 5H, and 6H, but there are also 10h and above. The higher the value of this H, it means that the harder the fishing rod is.So what is the tone of the fishing rod?It is very simple. After bending the fishing rod, look at the length of the previous part, and the ratio of the length of the non -curved part of the rear part can be divided into 37, 28, 19, etc.So what is the relationship between H value hardness and tone?Look down.

The tone and hardness of the fishing rod are not too much. They are two completely independent data.For example, a 6H fishing rod can be tuned 19, 28, or even 46.If you have to give a relationship, the higher the hardness of the hardness will be slightly smaller, maybe 19, 28, and 46, 55 less.That is to say, if anyone says that the higher the H on the fishing rod, the higher or lower, this is pure flicker, and fishermen cannot be fooled.

How to distinguish the tone and hardness of the fishing rod

1. Definition differences:The tone of the fishing rod refers to the stress bending point of the fishing rod. The simplest method is that the horizontal holding rod is bent as the bending position when the rod is beaten as a judgment basis.If bending from 2: 8 indicates that the fishing rod is 28 tuning, if the fishing rod bending from 3: 7 indicates that the fishing rod is 37;The hardness refers to the overall bending ability of the fishing rod. Generally, the first letter H of the digital plus English word Hardness Hardness H, but the hardness of the fishing rod does not have a uniform standard or each fishing rod producer has its own standards, soThe hardness of the same H value produced by different manufacturers may be different.

2. Classification differences:The tone can be divided into 19 tuning, 28 tuning, 37 tone, 46 tone, etc., the smaller the number, the harder.The hardness can be divided into 3H, 4H, 5H, etc., the larger the number, the harder.

3. Different from the judgment method:When judging the tuning, you can hold the horizontally of the fishing rod and shake, and determine it according to the position of the force point.Judging hardness can refer to the marking of the pole body.