1. What is the electronic fishing rod

The electronic fishing rod is a Tool for applying new electronic technology to fishing on fish rods. The purpose is to reduce the labor intensity of fishing, improve the reliability and efficiency of fishing, and fish for more technologies and poor physical strength.In addition, the size is small, light weight, about 1 to 2 kg.Easy to carry and simple operation.

Electronic fishing rod is an emerging fishing equipment in recent years. It is a fishing equipment that integrates sensors, controllers, monitors and power supply.By installing sensors in the fishing rod Sleeve and the bottom of the rod, the degree of bending of the fishing rod, the stress condition of the hook, and the speed of the tremor are detected, and these signals are transmitted to the display to facilitate the observation of the fishermen.When the fish bite the hook, this fishing rod can lock the fish wire by the built -in locking device, allowing the fisherman to control the fish's movement more conveniently.The advantage of the electronic fishing rod is that the degree of intelligence is high, which can display the motion of fish in real time, and help fishermen to better grasp the timing of fishing.

What is the principle of electronic fishing rod

The electronic fishing rod is transmitted to the receiver through the sensor installed on the fishing rod in real time, including the bending degree and vibration frequency of the fishing rod, including the bending degree and vibration frequency of the fishing rod.Alert device.The principle of electronic Fishing rods is basically the same as that of ordinary traditional Fishing rods, but high -tech devices such as electronic sensors are added to the traditional basis.

One of the obvious advantages of an electronic fishing rod is to improve the fishing efficiency of fishermen.Because the electronic fishing rod can capture the fish that is biting the hook, the fisherman can get a faster response, so that more opportunities to capture the fish.In addition, electronic Fishing rods do not need much fishing technology and experience, even beginners can use it proficiently.

1. Can the Fishing rods be changed to a Big rod?

The performance of the radia poles is strong and is not restricted by the fishing point environment and in -depth, so now it is more and more loved by fishermen. It is not difficult to make a rock pole by yourself. Just pay attention to choosing a fishing rod.Is it a pole?

The unused table fishing rod can be modified slightly, which can be turned into a rock rod, but not all the Table fishing rods can be changed to the rock rods, otherwise even if it is done, it can not meet the requirements of the rock fishing performance. Generally, it can beChange the rock pole's desk fishing rod requirement:

1. The length requirements of the fishing rod

The size of the ingenic dance of the Izon fishing rod is between 100-115cm. This length is mostly for easy portability, because some of the rock rods cannot be collected back, which increases difficulty.Therefore, we choose to make the fishing rod of the rock rod. The contraction length should be between this size, not exceeding 120cm and less than 100cm.Generally, 4.5m, 5.4m, and 6.3m of Taiwan Fishing rods can be changed to Bigrdi. Among them, 5.4m is more suitable, and the 4.5m Taiwanese fishing rod is too short, which is not conducive to far away;The radia pole is too long to throw an arc, but at the same time, it also increases the load of throwing investment, the hardness of the hardness will increase, and the feel will lack.

2. Terminal requirements for Fishing rods

Some Table fishing rods are too soft. Even if it is changed to the rock rods, it will become "four dislikes". There is no performance of the rock Fishing rods, not as light as the hand rod, and the head weight is very obvious, and it is easy to break the fishing rod.Generally, you need to choose a hard fishing rod, such as 28 tuning, 19 tuning, etc.

2. How to change the fishing rod to the rock rod

There are mainly four parts of the radia poles. Two poles, rock rods, conductors, fishing wheels, and sealing rings. Here are how to change the fishing rod to the rock rod:

1. Seal all the guide ring and fishing wheel seat, install it on the fishing rod for debugging.According to the sealing ring, fishing wheel seat, sealing ring, and then to the guide ring.The conductor should be removed after the debugging of all Links in accordance with the principle of large and small.

2. Pour the glue of epoxy resin glue at a ratio of 1: 1. When adding a small amount of quartz sand, it is recommended to use a "hair dryer" to heat it in stirring, which is better.Then make the glue a little cold dry to prevent too thin and flowing glue.

3. The order of glue, follow the steps during debugging.Apply glue to the edge of the sealing ring, and put it up in the fishing rod.Apply glue to the inner circle of the fishing wheel seat, and then apply glue to the fishing rod position into the fishing rod. In the sealing ring, the handlebar fishery wheels have been completed.

4. Divide the original settings that were originally set, and then draw about 20 cm each section of the fishing rod, and then load them in the sequence of size.When fixing the glue on the ring, first apply the portal of the fishing rod, then put the inner glue inside the ring, and then put it on the mouth. The excess glue must wipe it clean to prevent sticking to other parts.

5. The top ring is not the same as other conductors. The top ring first applies the pole, and then use the "toothpick" to apply the glue to the guide ring, and the pole is slightly, and the squeezed glue is wiped clean.

3. precautions for changing rock rods in Taiwan

1. When modifying, be sure to choose the environment where the personnel do not move, because during the application of glue, there is no error in any link. Once there is less installation, the leakage rework is very numb, it is also easy to damage the fishing rod and the guide ring.

2. Squeeze out or stick the glue on the table fishing rod. You must wipe it clean.

3. After applying, the fishing rod should not be moved as much as possible, let the glue naturally dry and then use it.

1. What does the tone of fishing rod mean?

When buying a fishing rod, you often hear a word called "tone". Some novice fishermen may not know what the tone means. Let me explain it below.

Tuning is originally a term in music, and in the fishing rod, the tone indicates whether the Fish rod body is soft or hard, or it can be regarded as the maximum bending of the fishing rod. After getting a fishing rod, it will beThe average fishing rod is divided into 10 copies, the horizontal pole is held, and the load of a unit is hung slightly. The cutting point of the curvature formed by the bending of the pole body is the dividing point.For example, the ratio between the two is 2: 8, then this fishing rod is 28 tuning.

Generally speaking, there are three types of Fishing rods: soft rods, mid -tone rods, hard Fishing rods, and super hard Fishing rods. The tone is mainly divided into 55, 46 tone, 37 tone, 28 tone, 19 tone and other.Among them, 55 is a soft rod, 46 is in the middle, 37 is a hard pole, and the 28 and 19 tuning belong to the super hard fishing rod.

2. Termination of Taiwan Fishing rods 28 is still 19 adjustment

If you want to choose a "hard" table fishing rod, you can choose 28 tuning and 19 tunes. They are all super hard Fishing rods. So which one is better?

1. From the perspective of returning fish speed

The 19 tuning is the ultra -hard rod in the tone of the fishing rod, and the fish return is faster. Compared with 19, the 28 tuning is a hard rod, which is slightly softer, but the experience of returning fish is more comfortable.The tone of the pole body is relatively obvious near the slightly jitter; and the 19th tuning pole body can hardly talk about the shake, even if it is a bit of the pole, it almost does not rebound, so the 19 Fish rod is also tuned for the Fish rod, which is also being tuned for the Fish rod.The fishermen joked as a "black stick".

2. From the perspective of the experience of returning fish

19 The hard rod is tuned. After the fish, the fish that hooks the hook from the water with the arms of the fisherman, which is the "flying fish" we call.After 28, the fishing rod can be used in the middle fish, and you can use the ingenuity and use the elasticity of the fishing rod itself to pop up the water from the water.In terms of experience, the 28 fishing rod is more experienced when fishing.If the fishey is irritable, the 19th tone is better, but the disadvantage is that it is very tired. It is easier to explode when encountering big fish.

3. From the requirements of the line group and line number

Because the elasticity of the pole body is different, due to the protection of the line group, the 28 fishing rod is slightly smaller in the line group, as long as the target fish's body shape and weight are not exceeded too much.There is no need to worry about cutting lines; 19 tuning fish rods are different, because the pole body is almost without elasticity. In order to ensure the rapid starting fish and return fish, the use of the fishing group can be called violent lifting, pulling, and drag.It is necessary to ensure sufficient tensile value so that in actual combat, it will not affect the fish mouth.

In summary, the two types of Fishing rods have their own advantages. If the target fish is not particularly large, and at the same time, if you want to pursue the experience of fishing, the 28 rod can take care of the two well; if you have enough physical strength and physical strength andAnd physical strength, and the density of the fish in the pool is very high, so 19 tuning is a better choice.In short, combining your own actual situation and fish love to choose a fishing rod.

one,Why should the fishing rod wrap the sweat -absorbing Belt

The fishing rod can grasp the fishing rod more stably on the fishing rod, and it is entangledSweatEven if you are sweating, you can not slide the pole. The fishing rod handle is comfortable, and the fishing rod itself is a lot more beautiful.in addition,WillSweating beltIt has a certain protective effect on the handpan, especially for competitive fishermen.

2. How to wrap the fishing rod in sweat absorption belt

Method 1:

1. First prepare the Tool, a scissors, and a roll with a roll, you need to wrap the fishing rod.

2. There will be black tapes corresponding to the brand in the tangled Belt. Do not throw this. It will be used when it is closed.

3. Use scissors to cut a corresponding diagonal angle on the entangled band to fit the round shape of the fishing rod grip. This angle can be determined based on the round diameter at the end of the Fish rod grip. You can test it yourself.

4. Follow the edge of the grip at the end of the grip with a diagonal angle, and then wrap it evenly. At this time, you can use a little force to prevent it from dispersing in the future.

5. Then there is a gentle winding up. Pay attention to the distance between each circle of entanglement bands. This will be a beautiful point of view.

6. Then it is the end. In fact, the end is the same as the beginning. It is to cut a diagonal angle on the entangled band to fit the round shape of the fishing rod.You can first find a pen to make a mark on the entangled band to facilitate cutting more accurately.

7. Finally, you have to use the black tape that starts to roll the wrapped band.Just roll with a black tape and roll the wrap band.

Method two:

1. Press the thin end (start) of the sweat -absorbent Belt on the side of the bottom cover of the handle.Generally, double -sided adhesive stickers are attached to the beginning of the sweat absorption belt.Fix the sweat absorption belt. If you shoot your left hand, the direction is the opposite.

2. Hold the handle with your left finger to rotate it clockwise. At the same time, the right hand controls the direction of the sweat absorption belt, so that the sweat absorption belt is aligned.SweatThe edges of the band can overlap each other, heavyholdThe overlap depends on personal preferences, usually 2 mm.

3. The sweat absorption belt is wrapped to the bottom according to the above method. At this time, cut off the excess sweat absorption belt. If necessary, you can trim the sweat -absorbing Belt upper edge.

4. Prepare the Belt tape and wrap the end of the sweat absorption belt with tape until it will not spread.

1. What are the differences between Fishing rods and hand rods

The fishing rod is a fishing rod, and the fishing rod is also a fishing rod. For novice fishermen, many may not know the difference between these two Fishing rods. In fact, the fishing rod is also a type of hand rod.There are two types of Fishing rods and stream rods. Compared with ordinary hand poles, the differences between the Fishing rods and the pole pole are mainly:

1. Different length

The length of the table fishing rod and the hand rod is different. Taiwan fishing will have great restrictions on the length of the fishing rod, so the length of the fishing rod is generally not too long.The hand poles are different, because when designing them, they can fish in any place in any waters, so the hand pole is generally long.

2. Different structures

The structure of the fishing rod and the hand pole is also different, and there are two different types of fishing tools.There are some poles on the Fishing rods and hand poles, but the number and length of these poles are different.The pole section of the table fishing rod looks relatively long, but the number is relatively small; the pole pole is exactly the opposite. Their pole section is relatively short, but the number is more.

3. Different weight

There will be some differences in the weight of the fishing rod and the hand pole.The fishing rod is a relatively lighter type of fishing rod, which can be used to use it.But the hand pole is more bulky.In particular, one of them called the "stream pole" hand poles. Their structure is more troublesome and needs to be used after the bracket.

2. It is still easy to use by the table fishing rod

1. The advantages and disadvantages of Table fishing rods

The fishing rod is long and less, and the strength of the uniform strength when it is stressed.The artifacts of carp, catfish, and catfish are also very easy to use in competitive fishing.

2. The advantages and disadvantages of the hand pole

The hand pole can be retracted, easy to carry, and small shrinkage length, but the disadvantages are obvious: because of the many sections, the tone will be relatively softer, and the fish may not be able to make the big fish. It is suitable for traditional fishing.

Third, novice Fishing rods or hand rods

For novices who have just started learning fishing, it is very important to choose a suitable fishing rod. It is possible to choose a fishing rod or hand pole. It mainly depends on the actual situation:

If the frequency of fishing is relatively high and often goes out to fish, it is recommended to choose a wider range of Fishing rods; the frequency of fishing is relatively low, but if it is occasionally fishing for entertainment, then buy an ordinary stream rod.It is also easier to operate.