[GPS positioner tracker] How to install the installation method of automobile GPS positioner, how to install the GPS locator

The installation method of car GPS positioner

Many novices for the first contact with the GPS locator of the car, which is unknown to the installation of GPS, which has led to the disorderly installation, causing the product function to be incompletely realized, or the accuracy of the positioning is not as described as the manufacturer, which affects the wiring problem.What to do if you can't wiring.There are the most comprehensive introductions below.

1. Finding method of power cord

The electric source line is generally found in the inside of the decorative board under the steering wheel and the central electrical box wire beam. It is directly connected to the positive electrode of the battery when conditions permit.The DC voltage of the normal work of the car is 10 ~ 36V.The power cord has electricity in any state in any state.

Finding method: Pull out the key, find the thickest thicker, use the test light (or test pen) to use one end of the iron, and the other end to test on the connector of the line.If the test Lights are always bright, it means that the line is the power cord.

2. Finding method of ACC signal line

The ACC line is generally found in the inside of the decorative board under the steering wheel and the central electrical box line.The ACC signal line is the main basis for the host to determine whether the vehicle is in a starting state.

Finding method: Find a thicker line in the ignition switch line, use the test light to use the iron end to the iron, and the other end is tested on the connector of the line: when the ignition switch is hit to the "ACC" or "ON" file, the test Lights are bright;After turning off the ignition switch, the test light is destroyed. This connection is the ACC line.

3. Finding method of turning to the light line

The turning light line is generally found in the inside of the decorative board under the steering wheel, the central electrical box line beam, and the left and right front door inside line.Most models are left and right lines, but there are also very few models divided into four lines of front, rear, left, and right.

Finding method: Because the colors of the left and right Lights of small lamps, brake Lights, and reversing Lights are the same, they can be combined at the front and rear Lights to compare the color of the left and right lines to find the turning light line to see its color and size.Find the same color line.Use one end of the test light to take the iron and the other end on the line. When turning on the left or right turning light switch, use the test lamp to try this line.Light line.The other way to find the light line is the same.

Note: The turning light lines of some models (the turning light controlled by the module) cannot be confirmed on the wire beam under the switching of the turning light, and it can only be found in the same way in the central electrical box wire beam and the left and right front door beams.For models controlled by the front and rear turning Lights, it is recommended to connect the lines of the rear turning light to the line of the original car.This wiring method is settled by defense, and only the back to turn on when the defense can be turned on.

4. Finding method of the brake line

The brake line can be found at the brake light switch above the foot brake.

Finding method: Find the brake light switch, use one end of the test light to use the iron, and the other end at the switch joint.One of the lines should be constant electricity, and the other has electricity after stepping on the foot brake, and the line that has no electricity after loosening the foot brake is the brake wire.

5. Finding method of oil -breaking wires

The car oil wires are connected in the oil pump positive line.The characteristic of the positive line of the oil pump is that the ignition switch is hit to the "ON" gear. When the vehicle is not started, the line has a short period of time for 2 to 3 seconds, and then returned to the initial state of the powerless.For positive electricity.The purpose of the original car design is that before the engine starts, there is a standard oil pressure in the oil pipe, but it also prevent the ignition switch from being in the "ON" file for a long time, and the vehicle is not started to burn the oil pump.Oil pump positive lines can generally be found in the fuel tank, left or right front door beam, and central appliance box.

Finding method: Find a thicker thread in the online beam, use one end of the test light to use the iron, and the other end to test on the connector of the line.When the ignition switch is hit to the "ON" file, and the vehicle is not started, the line has a short time positive electricity for 2 to 3 seconds, and then returned to the initial state of the non -electricity;The root line is the positive polar line of the oil pump.

6. Finding method of Akmen signal line

The tailgate signal line is connected to the tail gate control switch line. This line can be found in the rear tail box, left or right front door line.Generally, vehicles have two wiring methods: positive and negative trigger.When the tailgate is turned on, the tailgate trigger line is positive electricity. When the tailgate is turned off, the tailgate trigger line is not electrical.When the tailgate is opened, the tailgate trigger line is grounded. When the tailgate is turned off, the tailgate trigger line is a positive electrical situation.

Finding method: Find the tailgate trigger line at the tailgate trigger switch, see the color and size, and then use the test light to use the iron end to the iron, and the other end is tested on the connection of the line to see if it is triggered or triggered.Then in the inside of the car, find the same color line, use one end of the test light to set up the iron, and test the line on the other end on the connector of the line.

7. Finding method of the side door signal line

The side door signal line is connected to the door control switch line.You can be found in the left and right front door beams.The original car door control switch line has two trigger methods: positive trigger and negative trigger.In addition, the original door control switch line also has two types of wiring methods: the four door control switch line connects the traditional wiring method and uses module control.Way.

Finding method: For the traditional wiring method connected to the four door control switch lines together, it can be directly connected to a single door control switch line.Look at the color and size of the door control switch line at the door control switch, and then find the same color line in the front door line.Use one end of the test light to take the iron, and the other end is tested on the connection of the line: When the side door is opened, the side door trigger line is electric. When the side door is turned off, the side door trigger line has no electricity.When the side door is opened, the side door trigger line is grounded. When the door is closed, the trigger line of the side door is a negative trigger.

For models controlled by modules, they are divided into two types of old models without original vehicle anti -theft remote control and new models with original car anti -theft remote control.The model without the original car anti -theft remote control can be connected to the control ground line connecting the indoor light to the control module.When the door is open, the indoor light is turned on by controlling the module when the door is turned on; when the door is turned off, the line is not grounded after the interior Lights are extinguished by about 20 seconds.A model with the original car anti -theft remote control should be installed with four diode (1N4001) connected to the four side door switch lines.The secondary pipe positive poles are connected to the side door signal line of the car, and the negative poles of the diode are connected to the four door control switch lines.

The voltage on the door control switching line is low. It is necessary to measure it with a multimeter and test Lights at the same time, and the results obtained are relatively clear.

8. Finding method of speaker cable

The speaker cable can be found in the inside of the panel, the central electrical box line and the horn under the steering wheel.There are four ways to connect the original car horn.

A turn off the ignition switch speaker can still be sounded, and the speaker relay controls the speaker cable (positive, negatively triggers to select one);

B The ignition switch speaker can still be rang, and the speaker relay controls the speaker ground line (negative trigger);

C can only press the ignition switch speaker to press the sound.

D can only press the ignition switch speaker, and the speaker relay controls the speaker ground wire

GPS meaning in Chinese

GPS is the abbreviation of English Global Positioning System.GPS started a project of the US military in 1958 and was put into use in 1964.In the 1970s, the U.S., sea, and air forces jointly developed a new generation of satellite positioning system GPS.The main purpose is to provide real -time, all -weather and global navigation services for the three major fields of land, sea and air, and some military purposes such as intelligence collection, nuclear explosion monitoring and emergency communication. After more than 20 years of research experiments, it costs $ 30 billion. By 1994The global coverage rate of up to 98%of the 24 GPS satellite constellation is completed.

GPS has another meaning in the mechanical field: product geometric technical specifications (GPS).Another meaning is G/S (GB Per Second).GPS (Generalized Processor Sharing) broadening is a special term in processor sharing and network service quality control.

Common functions of GPS navigator

The GPS navigator can help users accurately locate the current position, and calculate the itinerary according to the established destination. The GPS navigator guides the instruments of users to the destination through the map display and voice prompts.Usually we use the car GPS navigator.The operation of the GPS navigator relies on GPS for short.It is composed of three parts: space satellite, ground monitoring and user receiving.

Map query

You can search for the destination you want to go on the operation terminal.

You can record the location information you often go to, and keep it, and you can share these location information with others.

Vaguely query your attachment or information about gas stations, hotels, cash machines and other information near a certain location.

Route planning

The GPS navigation system will automatically plan a line according to the starting point and destination you set.

The planning line can set whether to pass some ways.

The planning line can set whether to avoid high -speed functions.

Automatic navigation

Voice navigation: Voice provides driving information to the driver in advance to the driver, such as a guide to the road, such as a guide, telling you how to drive to your destination.The most important function in navigation allows you to reach your destination without watching the operation terminal.

Screen navigation: On the operation terminal, the map, the current position of the car, the speed of driving, the distance of the destination, the planned route prompt, the driving information prompted by the intersection.

Re -planning line: When you do not drive according to the planned line, or go to the wrong intersection, the GPS navigation system will re -plan a new line to reach your destination according to your current position.

Automatic voice guide

When tourists use portable tourist navigators to approach the attractions, the navigation system shows the connotation and more vividly to the Park scenic spots and display historical relics in a graphic manner, so that tourists can extend their connotation in the process of watching the scenes and exhibits.Visitors have fully appreciated the appearance of the scenic area and exhibits, and they have gained rich knowledge.

GPSPositioning anti -theftFunction

12. The vehicle is illegally moved, and automatically dial -up the police and the SMS notification of the alarm!And you can learn at any time to learn the accurate coordinate position and dynamics of the vehicle!

2The vehicle is illegally moved,GPSPositioning the anti -theft of the alarm automatically and expel the thief!

3The vehicle is illegally moved,GPSPositioning the anti -theft device automatic oil breakstrone short electricity!Let the thieves be unable to start!

4, The vehicle is illegally moved or stolen, the user can move/ /In static conditions, lock the motor vehicle position and call the police to track and chase thieves in time!

5The vehicle is illegally moved. Users can lock the motor vehicle position through a smartphone, or inquire about the dynamic position of the motor vehicle by the Internet. It can also use a third -party navigation function to lock the target!

6, The vehicle is hijacked, one -click dial can passGPSPositioning the anti -theft device anti -control vehicle, remote positioning monitoring, or driving the robbers!

7NothingGPSSatellite signal areas, automatically store the coordinates before signal, lock the thief dens or blind spots.

8Faithful guards, loyal bodyguards lurking in motor vehicles!With a power -off automatic memory settings, after re -powering, the data status of the working data state is automatically recovered before power off.

9, Actively send a greeting text message or holiday reminder SMS once a month; a warm prompt will be sent to the SMS every two monthsGPSPositioning anti -theft mobile phone card recharge.When the voltage of the car battery or independent power supply is too low, it will automatically send a prompt charging SMS to the host user.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Features of Bluetooth GPS wireless module

Although the Bluetooth GPS receiver is more expensive, the advantage is self -evident. The biggest feature is to get rid of the restraint of the data cable.smart phone of the operating system.Another feature is that you can place the range of no more than 10 meters between the smartphone and the Bluetooth GPS between the two. This advantage is that the GPS receiver can be placed to the place where the satellite model is favored.In the location of the viewing, for example, NOKIA's latest GPS module provides lane, which can be hung on the chest for easy carrying.In addition, it is used for car navigation to use an external antenna. At this time, you should consider whether the GPS receiver provides an external antenna interface.

2. Disadvantages and advantages

1. Bluetooth GPS is very small, easy to carry, simple use.

2. Bluetooth GPS can be used with smartphones, laptops, and PDA palm computers.It's not troublesome to use!It is best to use genuine navigation maps. If you temporarily use pirated maps, there are currently intercity pirated maps, pirated map 3.05 pirated maps, Kailid navigation maps (intelligent use on mobile phones), Route 66 test version map, ozi, mapking......wait.For details, please go to the navigation map column to view.

3. Bluetooth GPS price is not expensive.The cheapest is only about 500 in China, and the best imported from Taiwan is about 880 yuan.There are nearly 20 types of Bluetooth GPS in the market for you to choose.

4. Choose Bluetooth GPS. When using smartphones and PDAs, it will no longer occupy the battery resources of the mobile phone or PDA alone, because the Bluetooth GPS is equipped with a battery, both equipped with vehicle chargers and 220V battery chargers.

Bluetooth GPS wireless template

1) Quick search: 32 XXX search at the same time, 20 channels.

2) High -tech GPS chip: Sirf Star III chip.

3) Quick TTFF: 200,000 valid decoders, which can ensure that fast TTFF can still operate when low signals.

4) Built -in Waas/EgNOS (optional hidden WAAS/EGNOS device) and DGPS high -precision positioning.

5) Quick heat start: built -in charging lithium batteries can provide sufficient power for fast heat start.

6) Support protocol NMEA-0183 v3. Data protocol.

7) Strengthening the computing method provides super navigation performance, which can be located in environments such as cities, canyons or trees.

8) No user initialization settings are required.

9) LED light number display status: LED's light display status allows users to judge the power status. When the power supply is connected, the LED light is on. When the GPS-6036 is located, the indicator light "On" is shining, no need to use it no longer need to use it.Other devices to distinguish.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How to look at the direction of the electronic navigation map

What do you think of the direction of navigation?The arrows on the mobile electronic navigation map are not compass, but they will change according to the direction of movement.

1. After opening the navigation map software, select the address in the puppet bar, and then click the bottom (here) at the bottom (go here). There is an upward icon. After clicking, you will get the line diagram of the entire navigation section.Start navigation, but click the positioning of the small Yuanxin in the lower left of the map twice, and you can judge the position corresponding to any direction of the mobile phone. After you know your position, click to start the navigation to know that the direction should be taken.

2. The current mobile navigation is smart navigation, that is, a fool -type navigation.Therefore, it is not necessary to determine the direction when using navigation (north and south).After specifying the destination, start navigation, and follow the direction or voice prompts of the navigation instructions.

3. In addition, there are also directions and streets on the map.

4. In non -navigation, if you want to know the north and south of the country, you can use the northern needle on the mobile phone, or look at the direction of the north small magnetic needle on the map.

2. How to set up the route for map navigation

1. Open the mobile map software, select the [route] below, and select the starting position and end point position in the route planning page.Click the "" in the middle to add the first passing point and the second passing point, respectively.

2. Set up, click [Drive], enter the route interface, you can see the newly planned new route.We can also choose to set driving preferences to optimize our route.

3. In addition to "" to increase the passage point, we can also click on the route position on the line map to increase our way.In this way, there is a complete driving route that you need.

1. How to use the navigator

1. After use, follow the order of shutdown: close the page first, then shut down, and finally unplug the plug.Many car owners are directly unplugged after the habit of using it. It is believed that it is convenient to save trouble. In fact, this time is easy to damage the use of electronic components and the use time for the short navigator.

2. Regarding the charging problem, after the purchase of the machine, the navigator is best charged for 10 hours in the first three times, so that the battery power storage capacity is maximized.

3. Move the car first, and then insert some cigarettes.After the navigation is over, unplug the cigarette lighter, and then insert it after the car is launched next time. This will help protect the machine battery and extend the service life of the battery.

4. The screen of the navigator is still relatively fragile, so do not let the navigation screen contact sharp objects, let alone be strongly impacted. Care should be carefully put on the owner.

5. Do not place the sun in the sun for a long time. The larger temperature difference not only affects the battery life of the navigation, but also affects the touch sensitivity of the LCD screen.

6. In the case of not in use, try to store it as much as possible.

2. Daily maintenance method of GPS navigator

After buying a navigator, many friends usually only pay attention to the use of navigators, often ignoring the maintenance of the navigator, which will cause the navigator to occur after a period of time.life.

1. Correct shutdown order

When turning off the navigator, we must have the correct order. After using the guidance instrument, when we turn off the navigator, first turn off the application that is opened inside, then shut down, and finally turn off the power supply.However, many friends often turn off the power supply or unplug the plug. This can easily damage the navigator. After all, electronic products are very fragile.

2. Correct charging method

After buying the navigator, when you first started, try to be as full as possible every time you charge, so that the battery can reach the saturated state of power storage.If each charging is not full and the battery is "hungry" for a long time, it will reduce the service life of the battery for a long time.

3. waterproof and moisture -proof

Pay more attention to the waterproof of the navigator. Electronic equipment is afraid of water. Once water is entered, it cannot be used.When we cleaning the navigator, we try to wipe it with a twisted towel, and do not spray water on it.Dedicated cleaning products should be used when cleaning, so as to avoid damage to the screen.

4. How to use the touch screen correctly

Do not touch the navigator with hard things, so it is easy to damage the screen.In addition, do not let the navigator be exposed to the sun under the sun. This will not only reduce the service life of the battery, but also affect the sensitivity of the screen.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;