The difference between Swimming goggles and diving mirrors

The difference between swimming mirrors and diving mirrors, the structure and principles of swimming mirrors and diving mirrors are different.

1. The diving mirror has a device with sealing nostril ventilation.

2. The sealing layout of the diving mirror is huge, and it is important to control gas and water density.

3. Differences in the scope of use and cover: The scope of the diving mirror is available underwater and the water, and the swimming moster can only be used on the water;Only cover the eyes and water isolate, and the water tightness is relatively bottom;

4. Differences for use: Diving mirrors are generally used with air respiratory Tube, diving respiratory and other supporting facilities. When used, they are generally required to use their mouth breathing gas.Use nostrils to breathe in the environment.The swimming moster does not have this requirement.

Therefore, the Swimming goggles cannot be used for diving mirrors, but there is no problem with the dive 5 meters 10 meters. If it is to play the bottom landscape of the island, you must get a diving mirror.In general, swimming mirrors and diving mirrors are firmly unable to replace each other.

How to choose swimming mirror and diving mirror

1. Choose the swimming moster

It is best to try the swimming moster. In addition to whether it depends on whether it is myopia, it also depends on whether there are cracks around the rubber ring around the mirror frame. Whether the elasticity of the Swimming goggles is too loose.There is a nasal buckle to increase, giving you the size.It is recommended to buy civilian goggles, because the civil frame has a rubber ring, which is more suitable for people who usually wear less Swimming goggles.

2. Selection of diving mirrors

a. Facial mirror style: single view window, double window.Single -view window mirror, the most visual field; the double -window surface mirror can replace myopia lenses, and the left and right degrees are different.There were too many window mirrors, but it is currently not popular, and the inner cavity space is too large.

b. The inner cavity space: the larger the inner cavity, the more restricts the field of vision. Pay attention to the inner cavity volume or test wearing in the manual, and feel whether the lens is closer to the face.

c. Whether it is suitable for your face: wear the previously selected facial mirror test, 45 degrees angle on the face, the facial mirror band to the front, buckle the face mirror on the face, the screen gas (can not exhale from the nose), reply to the face to replyOriginal, shake left and right, and see if the facial mirror is firmly sucking.If so, it means that the facial mirror fits your face.

Note: The snorkeling facial mirror and diving mirror are different.The lens of the diving facial mirror is performed over the water pressure test, which can withstand the pressure of 50 meters of water, and the snorkeling facial mirror generally onlyars the pressure of 10 meters of water.The edge of the diving facial mirror is made of silicone, and some snorkeling mirrors may be made of rubber, or there is a problem with the composition of silicone.When smelling the smell in the face mirror, the silicone should be tasteless. If the smell is pungent, it means that the material is wrong.The slight smell may be just the taste of talc powder on the silicone, and it should not be pungent. Please pay attention to the difference.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

What to do if the swimming mirror is foggy

1. The most direct way is to buy anti -fog agents, rub the swimming moster, and then rinse with water.

2. Wash with a small amount of babies (tear -free formula) to wipe the swimming mirror, and then wash it with water;

3. There are also many friends who licked it directly with their tongues, which can also achieve a certain effect;

4. You can also use detergent, shower gel, shampoo drip into the frame. After applying it evenly, wash it with water (clean water will stimulate your eyes).

Factors affecting the effect of anti -fog

1. External factors

(1) Poor water quality is not good and has oil quality.

(2) Disinction water or too much chlorine pool.

(3) The high temperature exceeds 75 degrees Celsius.

(4) Direct light of ultraviolet rays.

(5) Chemical agent erosion.

(6) The mirror surface is scratched.

2. Personal constitution is easy to fog

(1) Those with a large amount of sweats can easily cause oil dirt.

(1) Oily Skin, with a large amount of oil on the face.

(1) Those with long eyelashes and brushing the lens.

3. Use habits

(1) After use, it is not rinsed with water, causing the internal oil to cover the anti -fog surface.

(2) Bring into the three -warm (sauna) oven, soak at high temperature or various medicinal baths such as chemicals to make the anti -fog fail.

(3) Directly exposed to the sun, and the ultraviolet destruction of anti -fog chemical effects.

(4) Place the car instrument board and set the object box (high temperature).

(5) Wipe the mirror in an incorrect way (wipe dry with a wipe or gently scrape the mirror).

4. swimming moster style

(1) The swimmingoscope space is small. When the amount of sweats is large, there is fog in the air; for example: the space in the bathroom is small, and the temperature and humidity are high, and the whole bathroom is fog.

(2) Wearing for more than 20-30 minutes for a long time, you must remove the fresh air to replace it, otherwise there will be fog.

How to maintain or restore the effect of anti -fog effect

1. The anti -fog function is hydrophilicity. Please soak it with water before use and then wear it. The anti -fog effect is better.

2. During the process of wearing, cleaning or use, avoid contact with nails or fingers and the internal anti -fog surface of the mirror to prevent the lens from scratching and destroying the anti -fog effect.

3. After each swimming, rinse it with water to prevent the oil stain from drying and block the anti -fog effect.

4. After each swimming, due to personal sweat and oil in the pool water, it will be attached to the mirror, which will affect the anti -fog function of the mirror surface.At this time, you can use a neutral cleaning agent to gently rub the foam with your fingers, and then use your fingers to use a little foam to gently wipe the swimming mirrors and wash the oil inside the goggles (note: before wipe with the foam, soak the lens first;When you wipe it with your fingers, avoid the fingernail scratching the anti -fog film.); Then rinse with water, you can remove the oil and restore the anti -fog effect.

5. Because the anti -fog in the Swimming goggles will be used for a long time and washed, the anti -fog effect in the Swimming goggles will be reduced. If the above methods are still not effective, the anti -fog agent can be used to enhance the anti -fog effect; alsoYou can apply it to the swimming mirror surface (no need to rinse with water), but these methods can only be briefly fogged and cannot maintain the anti -fog function for a long time.Whether there is oil on the mirror, and clean it according to the normal neutral cleaner foam.

How to extend the performance life of swimming mirror prevention and fog

1. The ultraviolet rays of the sun will destroy the anti -fog performance of the Swimming goggles. Try to avoid placing the swimming moster in the sun.

2. The anti -fog performance of general swimming moster will fail at 80 degrees Celsius.Therefore, you should avoid letting the Swimming goggles contact the thermal source, and avoid placing the Swimming goggles in the storage box irradiated by the sun.

3. The anti -fog performance of the standard swimming moster can be maintained for more than 100 hours. If the mirror surface is found when it is just used, most of the reasons are that the user swims in the unclean or oil -quality water, so that the lens anti -fog surface is attached to a one.Layer oil dirt is blocked by the anti -fog effect. At this time, as long as the oil dirt on the lens with a neutralized lens is used to restore the anti -fog performance of the goggles.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Buy onlineswimming mirrorHow are you?

Generally speaking, professional athletes generally choose the brands of Ying Fa, FEW, Arena, and Speedo, and amateur swimmers are generally only choosing a miscellaneous brand. It is recommended to buy a professional.Because the professional swimming moster has a special place, such as the foggy of the anti -mirror surface, it is not easy to break, and the others are hard to say.Also, it is best not to buy it online, because you can't see it beforehand, it is not appropriate to choose it. It is best to go to the small sales department of the larger swimming pool to buy it.

If you want to buy online, you must first note that if your eyes have a variety of diseases, you must make it clear to others, or consult a doctor's material harmless to your eyes (very important).Secondly, you want to choose the goggles of the rubber mirror frame. If you wear a rubber frame, you will be more printed with your eyes.Next, you have to choose the color (if you love beauty), the lens is yellow -green, dark red, white, and blue will be brighter, but if it is used for Outdoor swimming pools, it will be dazzling; the lens is black and gray.It is relatively dark, and it will be more unclear to use the indoor swimming pool.Finally, pay attention to the price. It is best not to buy a swimming moster below 30, and its quality will not be too good.

After buying it back, you should adjust the tightness of the Swimming goggles according to your personal situation. It is best to add lenses with saliva before launching (the inside and outside), and then use the pond water to brighten.However, consumers are advised not to buy online.

What problems should be paid attention to when buying swimming moster online

1. Comfortability

Following the principles of ergonomic engineering, a good swimming mirror can be adjusted naturally without loosening after wearing a good swimming mirror, which fully meets the interpretation structure of the human head, facial, and five officials.Nowadays, some swimming lens lenses are relatively small and are very popular in the international market.That's because the European and American facial features are deep and three -dimensional, and smaller lenses can just cover the eyes perfectly.But the same size lenses are not very suitable for Asian species.Asians are generally softer and have no stand -up and three -dimensional facial features.Therefore, it is recommended to choose the lens widely on the Internet to choose from, which can fully block the eye moster at the eye.

2. Properness

Determine whether the properness of the swimming moster should be in place, whether the frame, eye mask, and eye sockets should be perfectly fit, whether the length of the nasal bridge is just right, whether the headband is loose, whether the head of the eye socket is comfortable, otherwise the hardness of the pads of the eye socket is just right, otherwise it is too much.It can cause the pain of the eye Bone Bone, which is too soft and there will be risk of increased intraocular pressure.Because the mirror Belt and the pads are the most frequent parts of the delicate Skin of the eye, the safety of the material is very important.It is necessary to have strong elasticity and prevent adverse reactions such as allergies to bring allergies often.At present, these two functions are made of silicone materials, which are soft and comfortable, strong, and have a certain adsorption ability.

3. Anti -fog performance

The anti -fog magosa with good anti -fog performance has strong hydrophilicity with high -tech technology.It can adsorb the water and gas factors in the air into a water film, so that the water and gas cannot be attached to the lens.Strengthen the perspective of the lens.

4, appearance packaging

Nowadays, people's pursuit of improving aesthetic perspectives and personal fashion appearance determines that the swimming moster must not only ensure absolutely good eye protection effects, but also have exquisite fashion and personalized personality in appearance.Depending on different occasions, different people, and different dress styles, you must choose a swimming mirror with appearance matching.However, when choosing, friends should also pay attention to the shape of the goggles not to be strange. It is best to conform to the appearance of the body's physical technical design. The color is black, blue, and silver.

5. Choose myopia goggles

Friends of myopia often have a removal of glasses, and they are distressed.When swimming, if wearing Contact lenses, it is easy to cause eye infection.Therefore, friends with myopia need to buy the corresponding Swimming goggles.However, it should be noted that the degree of lens when buying a swimming mirror is about 50 degrees lower than the actual myopia. If the degree of myopia is not consistent, it should be based on the lower number, so that the selection is the most scientific.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Plating swimming mirror cleaning method

1. When there is oil on the surface of the swimming moster, choose a cleaning agent, choose neutral, clean it with your fingertips, then rinse with water, and then prevent it in a cool place.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced and even disappear.

How to wipe it clean

1. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

2. If the gap on the edge is dirty, you can use a toothbrush to dip a little bath brush, but don't brush the lens to avoid scratching the lens.

How to save the electroplating goggles

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. Do not expose the Swimming goggles in the sun, or put it in high -temperature environments such as car trunk and radiator.Because the anti -fog agent of the swimmingoscopy will be damaged due to high temperature or ultraviolet rays, shortening the anti -fog life.

3. In a wet state, putting together with Swimsuits, towels and other objects for a long time will cause stains, so put in plastic Bags or small boxes after use.

What are the matters of electroplating goggles?

1. After swimming, wash the swimming mirror with water, and then put it in the swimming mirror box.The advantage of this is to avoid some unexpected damage to the Swimming goggles.

2. When cleaning the goggles, be sure not to use organic solutions, such as alcohol, these organic solutions will cause corrosion of the lens, and the anti -fog effect of the Swimming goggles will be greatly reduced or even disappear.

3. When wiping the swimming lens lens, do not use anything to wipe directly to avoid destroying the anti -fog film layer.When the anti -fog effect of the swimming moster is not very good, you can use the swimming mirror anti -fog agent appropriately.

4. It is best not to touch the lens with your fingers, so as not to leave your finger printing, or let the oil pollute the lens on your hand.Because the contact with the eyes in the swimming mirror is partially a closed space, wearing it for a long time can easily lead to hypoxia.Therefore, it is recommended to take the swimming lens for a while each time it is used to allow the eyes to replenish fresh air in time.

5. After using it for a period of time, there may be oily stains on the lens. At this time, it can be rinsed with neutral liquid detergent and water, and then dry and collects.

1. The difference between the goggles and the swimming mirror

1. Watching mirror

The types of goggles are mostly. It can be a filter that can change through light and spectrals to avoid damage to the eyes through the hook of radiation. It can also be used as a medical goggles.Patients with blood and body fluids can also prevent the droplets of patients with respiratory diseases.

2. swimming mirror

The swimming moster is a kind of equipment in swimming. The production material is silicone, which has high -performance anti -fog, 100%anti -ultraviolet treatment, sealing function, mainly for swimmers to see things clearly underwater and prevent water from the pool from the pool.Enter the eye and occur in infection.

two,Can the swimming mirror be used as a goggles?

Although the swimming moster does not meet the medical protection requirements, it can play a certain degree of protection for the front -line staff who fight against acute respiratory diseases. It is necessary to use it to be used after disinfection. It is recommended to wear a dedicated goggles or protective masks.

three,What to do if there is no goggles

In addition to looking for swimming glasses, snorkeling facial mirrors, and Ski mirrors to replace, the following methods can also be adopted to protect your eye conjunctiva to avoid infection:

1. Homemade goggles

a. Preparation materials: A4 binding film (can be purchased in stationery stores), rope or elastic rubber bands, sponge or foam.

b. Put the film horizontally, piercing a rope on the top of the film on both sides of the film or nail the rope directly on the film with the book booking machine.

c. After mixing the detergent and water at a ratio of 1:10, wipe the inside of the surface screen with a cotton swab to prevent the fog.

d. The inner side of the surface screen of the head is pasted with a sponge or a soft foam, which will be more comfortable to wear.

e. Pay attention to the disinfection of alcohol after using the screen screen. It can be used repeatedly.This is currently the easiest goggles. The cost is the lowest and the effect is very good. However, for the public, when not going to Hospital or contacting cases, daily protection generally does not require goggles. It can be protected with masks.

2. Washing your hands frequently

After coughing and sneezing, after care, prepare for food before, middle, and after meals, after serving, after going to the toilet, contacting animals (especially wild animals) or processing feces, after going home, and timely use in public places in public cases in timeWash hands to wash your hands with soap and flowing water to keep your hands clean and hygienic. You need to take a seven -step washing method. After washing your hands, dry it with a clean towel, paper towel, or dry it with a band.

Step of seven -step washing technique

a. Inner: The palms are opposite, scrubbing the palm of your hand.

b. Outside: Wash the back of the other hand with one hand.

c. Fiping: Ten fingers cross the fingers between your fingers.

d. Bow: The fingers of both hands are bent, and the back of the finger.

e. Big: hold the thumb in the other hand and rub your thumb.

f. Li: Rub the fingertips of the other hand with one hand.

g. wrist: Hold the other wrist in one hand and scrub the wrist.

3. Avoid rubbing your eyes

If you rub your eyes and rub it repeatedly at the eyeball, you may rub the contaminated things into your eyes, causing infection.Therefore, if you want to rub your eyes itching, in addition to washing your hands first, you must also avoid directly contacting the eyeballs.In addition, I still can't rub my eyes with my hands. If the eyes are itchy, you need to ensure that you should clean and disinfection in one hand. Don't be too large in the range of the second knead.The back of the hand, gently wipe around the Skin to relieve itching.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;