1. Is the ice knife and shoe sliding the wheel skate?

ice shoes are shots of skating sports. Generally, according to different bottoms, they can be divided into two types: ice -knife shoes and roller skating shoes. The bottom of the Ice knife shoes is ice knife, and the bottom of the wheel skate shoes is wheels. Is these two types of ice shoes sliding the same?

The answer is negative. There is a big difference between Ice knife shoes and roller skates. Ice knife shoe skating is to tilt the ice knife with the transformation of the outer blade and inner blade of the ice knife.The front wheel frame and the rear wheel rack generate a certain angle to achieve the inner and outer blade of "a certain sense".

In addition, the speed of Ice knife shoes is fast. Due to the little contact with the ice surface, the stability is not good, it is difficult to move, it is difficult to get started; the speed of roller skates is slow, the ground is wide, good stability, easy to move, and easy to get started.

2. What are the differences between figure skating shoes and roller skates

Ice knife shoes can be divided into pattern Ice knife shoes and speed Ice knife shoes according to different ice knives. Among them, the tricks of the fantasies Ice knife shoes are slightly equal to one point. It is called a ball knife.

1. Different venues

The venue of skating shoes skating is generally ice surface, and its venue is a thick layer of ice; the venue of wheel skate is low, mostly made of cement or PVC floor, not a real ice.It is much rough than the ice sword skating venue.

2. Different gameplay

Falter skating shoes skating has a very high requirements for the venue. It must be really ice surface, and its gameplay is very viewing value. The superb technical practitioners will give people a feeling of dancing on the ice.The threshold for skating skating skating is relatively low. Ordinary roads can skate. It can be mobilized, and some technical challenges can be made, such as setting up roadblocks, and then eight -character painting method to cross roadblocks.

Third, can roller skates change the ice knife?

Can.

Roller skate shoes and Ice knife shoes are generally different at the bottom. Roller skates change the ice knife, that is, changing a knife rack, which will not cause any damage to the shoe body. Now there is a two -purpose roller skate shoes on the market. The wheels and ice knives can be replaced at any time.

1. Why are the standard size of ice and petherons a little small?

Ice hockey shoes have a variety of length and width. However, it should be noted that most icehouse shoes are not traditional shoe codes. Generally speakingWhy is this?

In fact, the reason why ice hockey shoes are smaller is mainly because Ice and soy shoes are different from traditional shoes. Ordinary shoes are for comfort, and ice hockey shoes are for professional level protection and taxiing technology. Excessive size will cause ankle joints.The stability is poor, so that the blisters and the decrease in the slide capacity appear. Therefore, in general, the codes of ice hockey are 1-1.5 yards smaller than the shoe code. Of course, this is just a rough estimate.Another set of size algorithms that are completely different in shoe codes, you need to pay attention when buying.

2. How to choose a size of shoes for buying ice hockey shoes

When buying ice soy sneakers, it is important to choose the right size. Avoid the laziness and saving size. It is generally recommended to choose after trying it on.Try to be as precise size as much as possible:

1. First of all, according to the length of the feet on the measuring board, measure the width of the foot and visual inspection of the arch of the foot to visually determine the foot type and choose the appropriate icehouse shoes.

2. Then, first use the sitting position when trying it on. At this time, the big toe can gently touch the front cover of the ice coat shoes as the ideal.

3. Finally, when the center of gravity falls to the middle of the feet, the back heel should be firmly locked in the heel bag. At this time, the big toe should no longer be exposed to the front lid of the icehouse shoes.Essence

When buying icehouse shoes, it is recommended that you go to the professional ice hockey equipment store to buy ice and petal shoes under the guidance of professionals. Professional ice hockey equipment stores can also provide comprehensive supporting services, such as hot -fixed type, grinding knife service and even even are even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service and even a knife service.The inside of the shoe body of the ice sneakers is modified to eliminate the pain points caused by a small number of players for special foot types.

1. How to open the blade with speed skating knife shoes

The just -bought Ice knife shoes need to be used to use it. The ice knife is not open because the blade is blunt, and it cannot be eaten on the ice.There are generally three blade methods of Ice knife shoes:

1. Mechanical grinding

Motorcycles are processed by professional machines.

2. Semi -mechanical grinding

Use sand wheels to grind the blade. Due to the large wear, it is only suitable for rough grinding, and then manually polished.

3. Manual grind

The cost is low and the effect is good. People who have high requirements for skating quality are manually grinding by themselves.Speed skating knife shoe handmade grinding is generally flat grinding: fix the ice shoes on the grinding shelf, bring gloves, and carefully check whether the two knives are on the same plane.You can use the large sand wheels back and forth a few times to see if the grinding marks are uniform.After confirmation, use the large sand wheel (30cm diameter) to make the "8" shape, until the burrs appear on both sides of the blade, and the rough grinding is completed.Then use coarse oil stones to continue making "8" fonts until the grinding traces are particularly small. After removing the knife surface and the burrs on both sides with fine oil stones, a pair of shoes is worn.Remove the ice shoes and clean the surface dust and residue.

Second, Ice knife and shoes are standard

To what extent to open the blade of Ice knife and shoes is a question that many friends are more concerned about. In fact, the Ice knife shoes have no specific labeling. Generally, the thumb is dried up.There is a depression.

3. precautions for Ice knife shoes

1. If the blade requires a high blade, you can choose to grind the knife, but if you are not a professional ice skaters, it is not recommended to choose hand -grinding, because the degree of grinding when the knife is grinded is difficult to grasp, it is easy to put the ice knife knife.Follow.

2. In order to prevent the damage of the blade and reduce the service life of the ice knife, it is recommended that beginners and enthusiasts try to choose professional mechanical grinding when grinding the knife.

3. The skate -Ski knife is a fine work.

4. The knife of the ice shoes has two blades inside and outside. Before the ice knife, you must first see if the inside blade is as flat as the outer blade.

5. Beginners are afraid of falling, and often use the inside blade to contact the ice surface. After a long time, the inside blade is lighter than the outer blade. At this time, you must first use the flat wheel to make the inside blade generally high, and then use the grinding gap.The sand wheel grinds a gap between the inside and outside.

6. In order to ensure the flatness of the ice blade surface, the eyes must follow the ice knife closely to avoid wear.

1. The difference between short track speed skating knife shoes and avenue speed skating knife shoes

Speed skating knife shoes are ice shoes worn by speed skating athletes. The speed skating movement is divided into two types: short track speed skating and avenue speed skating. The Ice knife shoes are also different.

1. Different length

It is mainly because the length of the ice knife Tube is different. The short track speed sliding knife is slightly shorter than the avenue speed knife knife body.The characteristics of small, more curve.

2. Different arc

The shape of the ice knife of the two types of Ice knife shoes is different from the arc of the knife. The arc used by the ice knife used in the short track speed skating is larger than the Avenue Speed Slipper, so that it can better adapt to the game.

3. Different runways apply

Short -track speed sliding is suitable for gliding for short runways (500m to 1000m).Short -track speed skating venues are 60 meters long, 30 meters wide, and a lap length is 111.12 meters.The avenue speed skating knife is suitable for long -distance gliding in the runway. The maximum perimeter length of the standard speed skating race is 400 meters and the minimum is 333.33 meters. The inner curve radius cannot be less than 25 meters or more than 26 meters.

4. Different styles

The short -sized skating ice knife is long and thin, and for the convenience of cornering, the ice knife is not fixed in the middle of the soles, but has a certain tilt angle. Generally speaking, the left and right foot ice knife is tilted to the left for about 15 degrees.There is only one fixed point of the Avenue speed skating, which is a "slippers".

2. Can Avenue Skid Slipper shoes in a short -sighted skating knife in the short track?

Speed skating knife shoes are mainly composed of three parts: boots, ice knives, and knife support. The ice knife can be replaced. So, can the Avenue Speed Skidine Shoe Siren Speed Skidine Skidine?

The reason why the speed skids are divided into two types is mainly because the requirements of the two ice knives are different, so they cannot replace each other.Generally speaking, the main feature of the avenue speed skating is fast speed, so the speed skating knife knife is very long, the blade is narrow and flat, and the ice area is large and the frictional resistance is small.The bottom is curved, and the area of contact with the ice surface is very small. The two types of ice knife are different. The short track speed skating knife cannot be settled on the avenue skating knife shoes.

1. What is ice shoes

ice shoes, also known as Ice knife shoes, are shoes worn during skating. The bottom of the shoes is equipped with a steel ice knife or pulley. The pulley is often referred to as skate shoes.

In the early days, the ice knife of the Ice knife shoes was tied to the feet with leather strips.Later, the ice knife was sandwiched on the shoes or tied it on the shoes with a strap.The ice knife of modern ice shoes is fixed on the ice shoes with permanent or semi -permanent (demolished bolts).

Second, is the ice knife of ice shoes sharp?

Skating athletes are generally wearing ice shoe skating. Their speed is so fast. In addition to strong physical and excellent techniques, I can't do without Ice knife shoes. Many friends have heard that the ice knife on the ice shoes is very sharp.How sharp?

Some friends heard that the ice knife of the Ice knife shoes can be cut, but in fact, the ice knife of the ice shoes is not so sharp. Generally, the thickness of the ice knife is about 1.1 mm.It is to ensure 90 right angles on both sides. If it is used to cut meat, it is just like cutting meat with a knife with a kitchen knife, which is quite tiring.

However, this does not mean that the ice shots of ice shoes are not dangerous. The speed of skating players is so fast. Once they fell out of the track, the 1.1 mm thick blade can cut the Skin instantly under the strong impact, cut the blood vessels and tendons, and give the athletes to the athletesCauses huge trauma.Therefore, speed skating (especially short track speed skating) has very strict rules. Competition clothing has a certain anti -cutting effect, and athletes will also pay special attention not to let themselves fall to avoid injuries.

Third, why the ice knife of Ice knife shoes is so sharp

The ice knife on the ice shoes is very sharp and looks dangerous, so why use such a sharp ice knife?

In fact, the ice knife on the Ice knife shoes is so sharp is to help players slide faster on the ice: when the weight is unchanged, the ice knife is getting sharp, the smaller the contact area of the ice surface, the more stress the pressure will beThe ice above-36 C from the inside to the outside from the crystalline ice layer, the non-fixed ice crystal layer, the ice water mixture layer and the liquid water layer.The bleeding mixture layer of the glue state is compacted, and the water in the mixture is described as "the phenomenon of the pulp". The ice particles in the transition layer are rolled in the direction of the ice knife movement., Make the ice knife move more Smooth.