1. How to wash sports shoes

The first is to clean up roughly. Use soft cloth or soft brush on the surface of the surface of the bar or clean, especially the mud beside the soles of the soles.Just wait for it.

Put half a pot of water and put the appropriate amount of laundry powder.Take out the insoles of the sneakers and soak the shoes in water for a while. It can be used for a few minutes. Do not soak it for too long, which may cause dehydration.Then clean it inside and outside with a soft brush, it is best to change the water several times until it is clean.

If the insole is not dirty, it can be placed in the ventilation place to remove the odor. If it is dirty, use soft water in water.Do not use too hard, do not use detergent to avoid causing the insole to deform and the surface layer fall off.Just dry it after washing, do not expose it.

After washing the shoes, they can be dried forcefully, or they can also be shaken with a washing machine. After drying, put it in a ventilated place. Do not expose it. After drying, you can use some emulsion oil to protect the upper, and then save it.Well, how to wash sneakers is like this.

2. How to wash white sneakers

Wash the soles of the shoe: Before you brush the shoes, clean the soles of our shoes, because the soles of the shoes are the dirtiest places. cleaning here is also helpful to clean other places.So how do you brush your shoes and your shoes are not clean.

Soak the shoes through: First of all, put a pot of water. If you have to flood the shoes, you must soak the inside and outside of the shoes.Don't soak too long, it is easy to cause the shoe to open the glue, probably soak5It's okay.

Putting net white soap: Why do you recommend using net white soap here?First of all, because the net white soap is easier to clean, it is not easy to leave the residue, and it also has the effect of adding white, so after soaking, it will start to put the net white soap.Don't just hit the surface of the shoes.

Gently brush with a brush: When brushing your shoes, you must pay attention. Do not brush hard. Although the shoes are strong, your excessive force will cause damage to the surface of our shoes, especially cloth shoes, which is easy to brush hair.We need to use a toothbrush inside the shoes. Prepare a toothbrush. Because it is not easy to brush in the shoes, it is easier to use toothbrushes and cleaner cleaning.

Water control stickers: After brushing, use the water to control the water inside in time. You can stand the shoes on the corner. After almost the same, pour the water out. Now start the sticker and take it.Be sure to wrap it all. Don't just wrap the surface of the shoes. You must even wrap the bottom of the shoes. After drying, it is not easy to appear yellow.

3. What to do if white sneakers become yellow

Drying: Because white shoes are placed for a long time, it is easy to yellow, so you have to put some desiccants in your shoes when saving. Many friends will feel that there are no desiccants. In fact, many food packaging Bags are available.You can use these desiccants to save our shoes, which is very useful.

Do not disassemble stickers: Generally, when our shoes are not worn, they need to be cleaned again and then save it. According to the above -mentioned methods, they do not need to remove these paper after drying the shoes.When you wear it again, tear these paper off, so that your shoes are still very white and will not yellow.

Fourth, sports shoes maintenance common sense

1. You should start maintenance when you are not wearing.Make a layer of protective film on the upper to maintain its beauty.

2. Do a good job of normal maintenance.

3. When the shoes are worn, it is best to place it in the ventilation for a day so that the shoes have enough time to dry.

4. The nylon mesh cloth and the artificial tanning leather on the shoes are relatively easy to maintain. You can wash it with a sailor. It is best not to soak it with a washing machine or water.

5. In order to extend the life of the shoes, wash as little as possible.

6. No matter how durable shoes, you can't afford to wear it every day, and your shoes need to rest.

When not worn:

1. Take out the insole and place the shoes in the ventilation, which is convenient for the shoes to emit heat and restore the original state.

2. Wash the neutral laundry powder and dry it in a ventilated and dry place to avoid direct sunlight. Long -term exposure to the sun will cause the upper to change or destroy the upper tissue and shorten the service life.

3. Try to avoid squeezing and keep the shoes the original.

4. When not in use for a long time, wash and dry it, and store it in a dry place with paper.

5. Avoid high temperature baking.

1. How to buy skateboard shoes

Basically, any sports shoes can be engaged in skateboarding, but there are still some different places in skateboard shoes and general sneakers. Skating shoes particularly emphasize foot protection in function, providing abrasion, shock absorption, and excellent grip.The heels adopt a visible air cushion design, which gives the foot shock protection required for the foot. The stable film placed in the middle section of the shoes also provides the need for support and torsional resistance, so that the board can act as the desire.sprain.The back of the shoe is particularly thickened to protect the foot of the skateboarding family.

1. The strength of skate shoes:The material of the shoe sole and the shoe of the shoe is preferably polyurethane. The upper is preferentially thick -wool leather, which is more wear -resistant.Note that you usually use the shoes used when OLLIE takes the board. Try to avoid these positions with wiring shoes when choosing shoes, so as to prevent premature scrap of board shoes due to cutting off the line.

2. The comfort of skate sneakers:For some skilled skates, they prefer to use thinner shoes.These sneakers are relatively thin, but they usually have a thicker or air cushion insole. The leather used in the upper is relatively soft. When doing action, you can clearly feel the sand on the surface of the board with the feet.And the fierce slide hands usually choose thick skate shoes.For example, the soles of the sole or the oil pad, the tongue is thick, so it feels wrapped in it.

two,SkateWhat good match

1. Skateboard shoes with jeans: dark jeans are more suitable, tightness is more appropriate, and it is very figure.

2,Skating shoes with black foot pants: Very thin and figure, with red sneakers, it is also very beautiful, very vibrant.

3. Skateboard shoes with a half -bodied long skirt: The college style is particularly foreign, and the youthful vitality is showing. Students in the school are the best.

4,shoes with strap pants: The strap pants itself are young. After wearing small white shoes, it will be more young, suitable for petite figure and strong recommendation.

5. With the nine -point sports pants: The nine -point sports pants can leak shoes and look full of vitality.

6.With long dress: Although this kind of match is very common, it is really good -looking.

How about rubber foam shoes?

The rubber foam base is a paved fabric made of naturally or artificial rubber -made rubber -closing or open -hole foaming materials.Half a century ago, people used this material for a large amount of such materials for sneakers, sports shoes, tourist shoes, liberated shoes, casual shoes, etc.

The bottom of the shoe made of rubber foam is light and wear -resistant, good tearing resistance, aging resistance, corrosion resistance, and insulation.20 The low temperature of the degree will not occur. The performance of the rubber foam sole is much better than the foam plastic outsole, and the production process is simple.Use foaming materials as the sole to reduce the weight of the shoes, increase the elasticity of the sole, make it more abrasion and more comfortable to wear.

Is rubber foaming sole wear -resistant and non -slip?

The advantage of foam rubber soles is that the weight is light and soft, and the built -in foam base also has a warm function.The non -slip performance is mainly related to the pattern of the material and the sole. For example, people call itThe bottom of the "beef tendon" is poor on the snow and ice.The non -slip performance is better on the mud.The tooth -shaped bottom drainability is better. The non -slip performance on the wetland is good ,, The suction cup pattern bottom is good at ice and snow.

Comparison of rubber base, foam base and rubber foam base

The proportion of rubber bottoms is generally high (that is, unit density) is a sulfide process, but non -slip and wear -resistant is the first choice for shoe materials (except for novel composite materials). It is suitable for Outdoor shoes, running shoes, basketball shoes, etc.

The foam base is a foam process. The mainstream of the current industry is used EVA Foam, which will be lighter than other materials, but the cost is that other material properties do not have rubber bottoms. Generally, it is matched with rubber.

The rubber foam base is based on the rubber base and the foam base. It is a rubber foam function (we know, if the rubber is 1 Compare 1 If, rubber foam is generally 1 Compare 1.1 It can be done). The advantage is that it has both the high -wear resistance characteristics of the rubber and the lightness of the foam base than the traditional rubber.It is also obvious that processing operations are difficult.Generally, you can replace the rubber bottom with foaming EVA The bottom is matched with the bottom.

In simple terms, Rubber bubble bottom Good.Because the soles must first consider comfort, foaming can be successfully improved to improve the shock resistance and vibration reduction performance of the sole.

Without foaming, because of its good return of elasticity, the comfort of rubber is stronger than that of ordinary plastic, and the abrasion resistance is also stronger, but the periponum resistance is weaker.Both plastic and rubber can be foamed, and because of the continuous development of plastic technology, the boundary between rubber and plastic is not so obvious.In terms of process costs and comprehensive performance, important members of the plastic family--- Thermoplastic elastic body is increasingly low to replace rubber.

How to match socks and shoes to look good

1. Loose shorts

In summer, the simplest and rude match is of course shorts.Short pants means that the shoes are completely exposed without modification, so while cool and comfortable, there are high requirements for controlling the ability to control, especially the leg shape.Short pants are about six points. If you have two perfect long legs, then you can really control shorts and socks.

2. Black cropped pants

Black cropped pants can be said to be the mainstream items with socks. It can not only highlight the slender shoe shape, but also allow the "shoe gang" to have a very natural connection with the trouser legs, so that the matching is more integrated, and it also allows the child to make the son.shoes become the absolute protagonist of the whole body.Especially friends who like the minimalist wind currently popular, with a solid T -shirt is a minimalist textbook match.

3. Bid pants

Since the hot of the pants, it has been regarded as the best partner of the sneakers, and the same is true for socks.Especially for boys with relatively strong calves, a dark bouquet pants not only have the effect of setting off the sneakers, but also make your legs more well -proportioned.The trousers of the pants are preferably with just covered the shoe to help, or you can stack it above the shoe gang.It should not be long, do not stack the shoes to help.

4, formal dress

socks are actually a kind of sneakers, and it can also be matched with formal clothes.A pair of dark sock shoes can make the format wear without any sense of disobedience, but if it is a special formal occasion, let's put on leather shoes honestly.

5. Stack of socks

Stacking of socks is a nirvana with socks, that is, the shoe helper that makes the socks higher than the socks, and then the pants are higher than the socks, or with shorts, forming a natural sense of layering.We can use this as inspiration to choose some socks that are rich in details to complete the matching.

What are the characteristics of socks and shoes

1. Light and breathable

Without comparison with leather, socks and shoes that are full of breathable holes are much more breathable than the vast majority of the mesh, and it is lighter and thinner.

2. Integrated

Most of the traditional sneakers are stitched. The cable on the splicing area will rub with the foot during the movement, which is very painful.And integration does not cause this problem.

3. soft and close

The soft upper will close your feet in exercise to reduce the soreness in the exercise, and there will be no problem of grinding feet at all.

4. Fine feel

socks and shoes can make people feel very obvious, and the lines are very unconventional.It feels delicate and very soft when I feel and wear on my feet.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[middle -aged and elderly sports shoes] How do the elderly choose sports shoes

Elderly sneakers are particular about the choice of sports shoes

When testing the shoes, you should use your feet to the ground, adopt an upright posture, and use your thumb to move up and down. It should not be too large or too small. If you choose a high -top shoes, it is best to use squat posture to confirm whether to grind your toes after the shoe.The widest part of the shoes should be consistent with the widest part of the feet to ensure that the shoes are curved with the toe joints when the front foot is strong.

Try to penetrate both feet, and if there is a large and small situation, the larger feet should be prevailed.After trying on your feet, get up and walk around to determine if you are comfortable for your feet.

Try to penetrate the sports socks, reserve space on the front end of the toe, the length of the shoes is 2 to 3 cm longer than the feet. The reserved space of the toes and the toe can avoid the bruises and swelling of the feet.Dry.

The breathability of sneakers is very important, allowing the foot to breathe and breathable.

Pay attention to strong and stability at the heel.The heel of the jogging shoe should be wide and stable, and there should be lining tongue under the shoelaces, so as to protect the back and extended tendon.The soles should have a soft sandwich to absorb the impact effect.

sports shoes must have good non -slip properties.

Note that when Running and playing shoes, you can't wear the same shoes. For example, when Running and walking, you need to choose shoes with a certain degree of flexibility. When playing, you need to choose shoes with high shoe and a certain stability to prevent shoes to prevent a certain stability to prevent them from preventing it.Sprake on the ankle.When Running, you must wear thick -bottomed sneakers, which can reduce the vibration of the brain and reduce the occurrence of exercise damage.

When performing long -term exercise, it is best not to wear new shoes, let alone wear too hard or too slippery shoes to exercise, and it is easy to fall.