1. What does Fish drift food refer to?

Fish drifting lead refers to the amount of lead in Fish drift, that is, the weight of the maximum lead block that can be carried when the floating drift is kept on the water. Generally, when the float reaches the water, the lead pendant on the drifting feet will beThe weight of the float is often said.When the manufacturers produce Fish drift, they often marked the amount of lead in Fish drift. The purpose is to facilitate the fishermen to quickly choose Fish drift according to the fish and water love.

Floating leadership is the external reflection of the entire float ratio. Generally, the larger the amount of lead, the smaller the proportion of the entire float. It is one of the important parameters of choosing Fish drift. So how to choose a lead in Fish drift?

Second, how to choose the amount of lead and eat Fish drifting

The amount of lead in a Fish drifting determines the buoyancy of a Fish drifting. It can be said that it affects the sensitivity of our overall line group. When choosing the amount of lead in fish, the following aspects are mainly considered:

1. Long pole

The longer the fishing rod, the more difficult we will show when we throw the pole, so at this time, the amount of lead in fishing is relatively large. Generally, the fishing rod of 3.6 to 4.5 can choose 1.0 1.5 to eat.Leading Fish drifting, 5.4 6.3 Fishing rods can choose 2.0 Fish drift with lead, 7.3 to 8.1 Fishing rods can choose 3.0 Fish drift with lead.The amount of lead can also be relative to a little bit.

2. External factor

If it is windy weather when fishing, then we will have difficulties when they throw them. At this time, it is obviously inappropriate to choose a fish with a small amount of lead.It will be affected by inertia, so at this time we have to choose to eat a large amount of lead, and we can even choose to run the lead to resist the wind and the sky.

3. Make deep fishing water

In the actual fishing process, some fishermen like to use some product bait. These product bait have a certain atomization in the water, so the deeper we make the water, we can choose to eat Fish drift and eat leading amounts.In this case, in the end, our bait will be faster, which can reduce the atomization of the middle layer of the water. According to the general suggestion of the water depth, we can choose Fish drift within one gram of water within one meter.Choosing a Fish drifting within two grams of course, of course, can still be appropriately reduced to the Fish drifting lead.

In addition, in the black pit for fishing, it is generally windless and waves.In order to avoid the signals of some small fish, we can grab a real and effective fish mouth, and we can choose some Fish drift with large lead.

4. Make fishing method

When fishing in the hand pole, you can use some Fish drift with small lead. However, when you use some rock rods to fish, you can not satisfy the need for Fish drift, because you choose the rock pole for fishing.Throwing further, this requires us to eat a large amount of lead to support the throwing throwing. In addition, we use the rock pole to keep the fish. This also needs to use a large amount of lead.

Generally speaking, the principle of choice of Fish drifting to eat lead is to ensure that the fishing fish drifts with small lead. Of course, there is no law of fishing.

Why is Adidas coconut shoes so expensive

Adidas and American rapper Kanye West (Lord) The Yeezy series walking shoes launched in cooperation mainly follow the high -end route, and then celebrities wear hundreds of effects. In addition, its expensive selling is a way of hunger marketing.

In August 2015, the first generation of coconut shoes was launched, and the official website price was 1899 yuan. It can only be booked on the official website. After the success, it is only available in Beijing and Shanghai. Because it is a limited edition, the cheapest on the market is also 6000-8000 yuan.

In October 2016, the second -generation coconut shoes were released. At present, 5 batches of different colors have been released. It is said that the white zebra color scheme has a global limit of about 2,000 doubles. From the offer price of 1899 yuan to about 13,000 yuan.The market price of black and white coconut shoes has also slowly risen to about 5,000 yuan.

The influence and "limited edition" of the coconut series itself also have the operating ability and propaganda of Adidas itself to make the price of this series of shoes remained high.Disaster.

A group of so -called opinion leaders desperately tell you that this is good -looking, this is the trend, and then 1000 pairs of shoes have 10W people want. At this time, it is not important whether it looks good or not.So it is so expensive.

Of course, Yeezy can be grabbed back like this, and it is inseparable from its own design. The integrated Primeknit upper, plus Adi's patented technology technology Boost, Boost's cushioning, a strong sense of rebound makes it comfortable to be comfortableVery outstanding.The design of the shoe type is also very special, and the feet of the feet are also very comfortable.

Where can I buy coconut shoes of Adidas

Foreign store

Compared with domestic, it is more likely to buy adidas coconuts abroad, because this shoe is not made by China, and the number of sale in China is very limited.If relatives and friends are abroad, people may wish to pay attention to Adidas' official website dynamics, it will announce the release time of adidas coconuts from time to time. After confirming the time, you can ask relatives and friends to queue up one day early.

Official app

By reservation in the official app.The reservation requires GPS for compulsory positioning to register, then make an appointment for the shoe code, and then start to grab it.Adidas's mechanism is that if you enter the shoe code, you will recommend the closest number of yards.After the appointment is confirmed, it will be randomly distributed to pick up the goods. The pick -up is the QR code in the shop clerk scanning the APP, and then corresponding to the ID card confirmation, the money can get the purchased goods.

Adidas shoe clothing recommendation & gt; & gt;

1. How to use the lifeburn circle

Most of the falling water accidents are sudden, and water rescue is actually Running against time.In emergency situations, when some people fall into the water or flood disasters are trapped, the golden time of water rescue is only a few minutes, and the water falling and rescuers need to understand the correct use of the life circle in order to rescue more quickly.

1. The throwing person holds the lifeblood of the lifebuilding circle in one hand, and throws the lifebing circle in the lower direction of the waterfall person. When there is no flow and the wind should be thrown in the upper wind, so that those who fall into the water can climb the water. Be careful not to hit the water.It can also be tied to the railing by the railing, throwing the life circle with both hands.

2. If someone does not fall into the water during sailing, the water dropper should call loudly to attract the attention of other people.The discoverers should get the lifebuilding circle nearby and quickly throw them towards the sea near the waterfall. The specific method is to leave the life circle to the water fall.Those who fall into the water first grab the handles, then press the side of the life circle with both hands at the same time, so that the lifebuilding circle is erected, the hands and heads are in the circle, and then the life ring is sandwiched under the two armpits, keeping the head higher than the water surface.The body floats in the water, waiting for rescue.

3. If someone falls into the water during the mooring of the Ship, it is best to leave the life ring with floating cables at this time.After the falling water was climbed, the staff on the boat recovered the floating cable and pulled the falling water to the edge of the boat.

2. precautions for the use of lifeblocks

1. storage of the lifeburn

The Lifeline should be separated from the two -side side of the Ship, and there should be at least one stern; it should be able to remove it quickly and not to be permanently made.

2. The custody of the life circle

The life circle is stored in open -air, and it is easy to damage. When storage, you should pay attention: often pay attention to whether the appearance is cracked, whether the hand is worn or mildew, and whether the buoyancy material is aging;Rust removal and paint should be repaired in time.

3. precautions for Safety Circle Safety Circle

The life of the lifebuilding circle should be correct; the life of the lifebuilding circle cannot be hit to the water; pay attention to the use of the life circle that is not allowed to be used casually; check every three months.

4. Regulations on the management regulations of the life circle inspection and maintenance

The sailor chief (or the designated person in charge of the platform) counts the number of life circles per week (before the typhoon comes), and check the reflective band, self -light and ropes on the life of the lifebing circle.Supervision for replacement.If you find loss and damage, report safety supervision immediately for supplementary and maintenance; reflective bands fall off and paste immediately.The self -lighting Lights of the lifebuilding circle shall be checked by the sailor chief during each dynamic period.Performance; if the battery enters the moisture, the battery will gradually fail, so you cannot pull the water in the water at will.

[Moisture -proof paper] How to choose the principle of moisture -proof paper to purchase moisture -proof paper

principle of moisture -proof paper

1. It is a wrapping paper made of asphalt in the middle of the two layers of original paper.It is mainly used for cigarette cigarettes and can also be used as fruit packaging.The moisture -proof paper has a certain moisture -proof ability. The minimum moisture -proof rate is above 15%. The good moisture -proof paper is uniform and the bonding is firm.It has odor to avoid affecting the quality of cigarettes, but the paper packaging cigarette is no longer used.

2. To prevent moisture, moisture -proof is to prevent the humidity in the air from being too high. Excessive humidity of the air will cause mold to breed quickly. Moisturizers can not only make items moldy, but also make the elderly and children infected with various diseases.Economic losses caused by humidity and mildew are as high as hundreds of billions of dollars due to humidity and mildew.

How to choose a moisture -proof paper

1. Buy stickers based on wear resistance: The strength of the degree of wear resistance can directly reflect the quality of the stickers.The high -quality high -quality stickers can be simply scrubbed and after scrubbing, it has no effect on the overall. On the other hand, some inferior stickers will be damaged or water stains.Therefore, when choosing, use a pencil to draw on the selected sticker, and then rub it with rubber. After the rubbing, there is no trace for the superior quality, leaving traces as a secondary product.

2. Buy stickers according to the packaging: Choose the entire details of the wallpaper when selecting stickers. Generally, good quality stickers will be meticulous in packaging and marks, and will never give the defect opportunities.And generally paying attention to quality companies will adhere to the concept of "simplicity and simplicity", they will make their packaging look simple but not atmospheric.

3. Buy stickers from the environmental protection index: Whether the environmental protection is environmentally friendly is very related to our physical health. When choosing a sticker, you can first look at the sticker. It is best to burn a small section on the spot.The wallpaper is fully burned and has no pungent taste and smoke.

4. Many people do not know that mold is caused by the high humidity of the air.Scientific research shows that when the temperature of the home environment is between 25 C-30 C and the relative humidity exceeds 60%RH, the oxygen in the air is very sufficient. At this time, the mold will be extremely active and will quickly reproduce.Therefore, every year in the rainy season, the troubles brought by mold will erode people's lives widely.In tropical, subtropical, and temperate areas, especially coastal areas, mold problems caused by humidity are bothering people's lives all year round.According to statistics, economic losses caused by humidity and mildews each year are as high as hundreds of billions of dollars (only referring to family aspects).There are many types of moisture -proof beaded molds, including the subcortes, algae bacteria, and incomplete bacteria outlines in the fungal door.Mold spread mainly relies on spores. The spores are tiny powder, and it is not easy to observe with the naked eye.Because of its small size and light weight, it can float around with the movement of air flow, dust, human body and objects.

5. During the flow, once a suitable environment (temperature and humidity) encounters a suitable development, it will grow and reproduce immediately.The length, taste and deformation of the items happened.The mildew of the items causes the item to be damaged and feels uncomfortable, and the severe health will affect the health of the family (leading to Skin diseases and food poisoning), especially the harm of infants and elderly people with weak resistance.Essence

1. Is Riding glasses and windproof?

In the process of cycling, wind sand will cause a certain degree of damage to the eyes, because during the cycling process, the speed of the car is mostly tens of kilometers per hour. At this time, if we expose the glasses, the wind blows on the wind.It is undoubtedly a major damage to the eyes; coupled with the case of wind sand, the eyes will easily enter the sand, and the wind blows. If it is not protected, it can easily cause eye diseases such as sandylonsThe eyes will often be blushing.Among the many cycling damage, the wind sand is the most damage to the eye in addition to ultraviolet rays. Can Cycling glasses windproof?

The answer is yes. One of the functions of Riding glasses is windproof, so it is generally designed to fit the face shape, which has a certain windproof effect. In additionThe function of Riding glasses, this windproof effect is better.A suitable cycling wind mirror is not only windproof, but also dustproof, to avoid sand, dust, flying insects, etc. to enter the eyes; the rubber strips on the frame can also prevent sweat from flowing into the eyes, which is very practical.

2. How to choose a good windproof glasses

cycling is to wear windproof glasses. Windproof glasses can weaken light stimulation, windproof sand, anti -flyworms, and wearing wind mirrors in winter can also prevent eyes from crying. Pay attention to windproof glasses:

1. Material

The qualified windproof glasses lens should not be made of glass, plastic and other materials, otherwise an accident is easy to be crushed, hurting the user's eyes, good windproof glasses, strong anti -impact, lightness, toughness and other characteristics. Generally PC materialsMore common.

2. Frame

The overall material of the windproof mirror should be limited to the resin or TR-90, try to avoid choosing metals as much as possible, so as not to cause damage to the opposite side of driving. In addition, in order to obtain a better windproof effect, the fixed method of the frame should be fixed.

3. Sealing rubber ring

Good wind -proof glasses are sealing glue rings made of silicone material, which is closer to human Skin, and can effectively prevent sand and dust from entering the eyes through gaps. It is better to wear it to comfort.Some windproof glasses are made of plastic. It is easy to oxidize and harden. Not only can it not fit the Skin firmly, it can also cause indentation. It is not recommended to choose for a long time. It is not recommended.