[Moisture -proof bag] The use of personal moisture -proof Bags Personalized moisture -proof bag use precautions

How to use personal moisture -proof Bags

1. Pay attention to the Bags before and after inflating. Do not let the sharp objects scrape. It is best to be carried out on the bed or on the clean desktop during operation.Put it in the collection bag.When stored in the cabinet or other places, pay attention to whether there are sharp objects in the storage location to ensure the integrity of the bag.

2. Clothes, quilts and other items should be placed in the bag as much as possible. At least 3-5 cm from sealing zipper. Do not force items in large items.

3. To ensure the cleaning of the seal zipper part, if there is fiber and dust entering, the sealing performance will be reduced. It is recommended to wipe it clean with the watery gauze and then turn off the zipper.After turning off the zipper, please use the tight slide film to pull back and forth several times back and forth at the seal to ensure that the sealing two ribs are completely buckled into the groove to ensure the sealing effect.

4. Use the spiral pump to spin the pump to the end when using the air pump to resist the white rubber sealing pad with the air pump to ensure that the interface does not leak air. Generally, a large bag requires 3 to 5 cents.There will be obvious flattening phenomenon in five hundred.Pay attention to continuous pumping when using the air pump, it is best not to stop.It is best to have a vacuum cleaner at home, that is, effort and convenience.

5. After drawing, check the seal again to ensure the sealing.

precautions for the use of personal moisture Bags

1. Test of the good or bad pump pump: Tighten the pump to your face, and then draw the air.

2. If the bag after drawing, if the phenomenon of drumming occurs, in addition to the strict seal, on the one hand, the quilts in the bag will still be relieved and reduce the vacuum; on the other hand,No matter how dense materials are, due to the effect of negative pressure, the air molecules will "squeeze" the bag over time, and the vacuum effect will gradually decrease.

3. Leather and down products can be put in this product storage, but do not completely compress.

4. Before putting in the collection bag, it should be removed by the packaging paper or packaging bag, otherwise it will affect the compression effect.

5. The clothes put in the collection bag are fully dried.There is no need to use insecticides, preservatives, etc., otherwise it will cause discoloration and deterioration of the acquired items.

6, the bag has a crack or a small mouth, you can use the ordinary wide -side transparent tape to stick firmly on both sides, just fit tightly.

Is the Belt be useful for weight loss?

Belt belt can prevent or reduce joint damage, sprains, cramps, and damage caused by friction collisions. It can be completely closely fitted in the use site to prevent the body temperature from dispersing, maintain heat, promote blood circulation, cooperate with muscle function, reduce the pain of the affected part, and reduce the pain of the affected part.Help accelerate rehabilitation, shape excess fat in the body, shape a complete curve, play a bodybuilding and weight loss effect.

Can the Belt be helpful to thin waist?

Can the Belt really thin waist?This is a problem that many people care about. In fact, the Belt is still very helpful for thin waist. In fact, its original design function is mainly to prevent sports damage, but people find that while wearing a Belt, it isThe waist is getting smaller and smaller.

Because the waistband can put pressure on the muscles of the waist, it can promote metabolism well, stimulate the waist, and help help the burning of fat, because it also has a shaping effect, which can heat and absorb sweat and absorb sweat. This allows many people to keep many people.Use it to speed up the decomposition of fat.

How to use thin -handed Belt

1. To ensure comfort, we can wrap a soft towel first, and then tie up the Belt.

2. Use both hands to close the loose meat on both sides into the middle of the stomach, and then bring the fat on the lower abdomen upwards. After all of them are together, you can ask your family to help hold it, entangle the abdomen, from the pubic Bone in front, from the pubic Bone in front of the pubic Bone.Start entangled, and the height of the tail vertebrae is behind, so that after wearing underwear, we will not hinder us to go to the bathroom.

3. During the wrapping process, be sure to flatten the Belt and play a fixed role. In this way, the Belt will not slide arbitrarily. It is best to turn it once and half a reversal to improve the fat at any time to achieve better weight loss.

The correct use time of the Belt

Those who have just given birth to children are prone to flatulence and poor gastrointestinal motility. If they are tied with a Belt, they may increase flatulence.Therefore, pay attention to the taboos of the ending Belt, be sure to remove it before the three meals.After half an hour after dinner, tie it again.Keep tie 3 weeks after giving birth. If you loosen it, you must be tied again. You must ensure that the Belt is tight enough. You can hold the fat and Smooth the abdomen curve. After 3 weeks, you can slightly relieve the time of the Belt.It can be removed at night.

precautions for thin waist Belt

Pay attention when using a Belt thin waist. You can only use it to help, and you cannot rely too much on the Belt.Pay attention to the method of weight loss in the Belt. It is necessary to wear tightly or wearing the waistband or wear too long, which will hinder the normal movement of the abdominal organs and the circulation of blood, which will affect human health.Only with scientific exercise and healthy diet can better thin waist.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. Where to buy genuine football shoes

football shoes are not only played with football. For many fans, they also have a certain collection value. However, sneakers have always been the hardest hit area for counterfeit and shoddy products. To buy genuine football shoes, buy through regular channels.

Generally speaking, to buy a pair of authentic football shoes, it is recommended to go to the official physical stores of major shopping malls to buy. In addition to the official physical store, there are also cooperative release channels authorized by the brand Fang, mainly various trendy shoe stores, chain shoe storesYou can also choose.

If you want to buy a new product, offline stores may not be available for the time being. At this time, you need to consider online shopping. Buying football shoes online is easy to buy fake shoes. It is recommended that you use the official flagship stores on the major e -commerce platforms or officially authorized specialty monopoly.Shop purchase; you can also choose to go directly to the brand's official website to buy; in addition, some joint models can also go to the joint official website or app to buy.

Some collective value of football shoes are difficult to buy on the Internet. Generally, it can be sold on the sale through second -hand sneakers, but this is not suitable for novice friends, because it may be difficult to distinguish between true and false.

2. How do you think of football shoes is genuine?

The football shoe market is chaotic. Many fake sneakers can even be fake. If you don't want to buy fake football shoes, you can take a look at the following points:

1. When you get a pair of football shoes, what do you first observe first?Of course it is the appearance.This appearance includes the appearance of the accessories, which is also known as the shoe box, shoe bag, shoe pulling (some shoes are available) and three packages and product description cards.If the shoes you buy are all above, the accessories are complete, and the shoe box is printed exquisitely, then this is the first step.

2. After the accessories are over, let's take a look at the protagonist, the shoes itself.With the upgrading of domestic machines in recent years, the core technologies of knitted materials have gradually been captured by domestic manufacturers. The texture of the knitted fabrics is already close to genuine. This has undoubtedly increased the difficulty for those shoes that were false at a glance, but there are still there are still there are still there are still there are still there are still.Some tips, such as:

(1) Fake football shoes are complicated because of the many shoelaces. Many of the shoelaces of factory shoes are generally not fully worn. This is one of the techniques.

(2) The texture of the knitted material is infinitely close to the genuine product, but the specific ones will still show differences, such as the denseness of the knitting wire and the specific elasticity of the knitting wire.The genuine knitted material must be unconventional, there are no crooked marks, and the overall lines and shoe types of genuine sneakers are very good (medium and low end).

(3) Back heel setting: The rear heels of genuine football shoes are full and upset. It is one of the most beautiful arcs in a pair of shoes. Because of its own cottage, fake shoes are on the shape and mother.The skill is not enough, so generally this part is relatively dead, not vivid enough, and the arc is not natural.

(4) shoes: For high -top shoes, because the tongue is integrated with the collar, the structure of this part is also one of the souls.It is much more loose than shoes with football), but its collar and heel arc are difficult to imitate fake shoes.

(5) color color: Although the genuine sneakers also make some surprising colors from time to time, the color of others will not look weird, fake goods are different.You will find that even if you imitate a shoe with the same shoe, there is no way to completely restore consistency in the color matching.Why?It is very simple. The color of many football shoes in the big brands is its own exclusive color. It is transferred by itself. It is not on the Panpi color card. This is also the exclusive anti -counterfeiting method of the big brand.Therefore, the fake shoes are either kitsch or very tight. There is no kind of amazing and very moisturizing feeling at all.

(6) shoes: If you have enough authentic football shoes (high -end), you will find that high -level football shoelaces are also very particular.Now it is mostly that thin shoelaces, or a slightly thick structure in the middle of the two ends. Generally, fakes are worse for saving costs.

(7) Shoe standard: The identification of the sneakers and shoes are no longer the only hard standard. Compared with the improvement of the upper texture, the fake of the shoe standard is much easier.However, there are a few points that can be given to everyone for attention.The first point of paying attention to the shoe label is the goods number. If you do nt eat, you should first check the goods number of the shoe label on your hand. If the results you find are different, it must be Fake.

(8) Place of origin: The level of the outsole or low -end of the TF is impossible to Persia, Italy, Germany and other places. In addition, the factory corresponding to the place of production is codenamed.It is not necessarily comprehensive but representative: XC Guangdong Qingyuan, VP Vietnam, MX, MD waves, Italy.If the origin and the factory code are not right, there must be a problem.

(9) Insoles: The insoles of the top shoes are normal and relatively good EVA, and it is not a mold production. There is no edge number and digital teeth.It is common sense, if there is definitely a problem with common sense.In order to fit the midsole, some shoes have to varying degrees of raised lines on the back of their insoles.

(10) Shoe warehouse midsole/pull line: This normal situation can also be used as the basis for the true and false judgment. For example, most of the top -level football shoes are half -palm in the middle or no midsole structure.The speed -type sneakers at the bottom are also brightened.

(11) Osoral: top sneakers will play a lot of new ideas on the outsole in recent years.Visual effects, fakes cannot be done (it is labor -intensive, the cost is too high). In addition, the degree of fineness and high level of genuine products on the craftsmanship and molds is much higher. Unlike the things produced by the cottage factory, there are many burrs and injection holes.

1. Western hat

Cowboy hat from the American denim is called a kind of commonly wore Mexican denim."Stonson" -style wide -edge high -top felt hat.The top of this hat is depressed down, while the two hat along the two sides rolled up slightly.In addition to the people who wear it, it looks chic and capable, and the denim hat also has many practical functions. It can not only cover the wind, frost, rain and snow, but also the ready -made water scoop, rice bowl, and pillow.The evolution and diversity of cattle hats can be seen in Western movies.The western cattle hat is full of western style, of course, it is also very individual. It creates a male different style, and it is very useful to use it to cover the fierce sunlight in summer.

2. Wide -edge straw hat

The brim of this straw hat hat is wide and large, and there are rural areas.Straw hat is good for ventilation, and it can avoid direct sunlight.

3. mask -shaped sun hat

There are large black hats that can cover the entire face like a welder. In addition to blocking the sun, you can also prevent sand and insects.

4, Baseball cap

The logo of Baseball players is born for exercise.Therefore, it is most suitable for tourism, leisure, and exercise. The long arc with a arc can cover the sun. The adjustable loose band or magic sticker is suitable for different head circumference.Most of the mesh design is used in the second half, which is better permeability.

5.Multi -function hat

Added annexes such as sunshade skirts, hats and ropes, etc. The sunshade skirt can be fixed on the hat tongue to provide a complete Shading effect on the face and neck.It is restored to a ordinary Baseball cap.This hat is available in Outdoor goods stores, and most of them are made of synthetic fibers such as nylon. They are light, durable, fast, and difficult to deform, and they are both beautiful and functional.Suitable for long -term outdoor sports, such as Hiking, climbing, fishing, etc.

1. Can waterproof sleeves be washed water?

The role of the Sleeve is mainly to protect the cuffs of the clothes from being stained with dirty things. Now many people wear Sleeve covers to sunscreen. No matter what cuffs are, as long as there is no holes, the Sleeve can be cleaned and then used before using it before using it.EssenceUse a period of time or dirty Sleeve to just wash it into the water. You can also put it in the washing machine and clean it with other clothes. Basically, it will not affect the effect of the Sleeve cover, but it is recommended to wash it well.

However, it should be noted that there is a kind of waterproof Sleeve sleeve used for washing clothes and dishes. The waterproof effect of this cuff is better because the surface is coated with waterproof materials. This cuff is cleaned.It is best not to rub too hard, otherwise you may scrub the coatings on the Sleeve surface, which will cause the waterproofness of the Sleeve to deteriorate.

2. What materials are applied to the waterproof Sleeve

There are many fabrics of Sleeve sleeves. Common ones are cotton, chiffon, leather, ice, polyester, spandex, etc. The commonly used fabrics used in waterproof sleeves:

1. PVC waterproof fabric

The sleeves made of PVC waterproof fabric are easy to wash and dry, do not afford the ball and do not fade, resistance and washing and washing, especially suitable for group use for daily household chores and activities.

2. Polyester with Waterproof material

There are also some factories used in the sleeves of the factory sometimes also have waterproof demand. Considering the cost problem, because the manufacturing cost of polyester material is low and very resistant and durable, it will also use polyester fabrics with waterproof materials for waterproof Sleeve cover.

The above is the material of the two common waterproof sleeves. As for the good problem of waterproof Sleeve sleeves, the main problem is mainly depending on demand and budget. Generally, the waterproof cuffs made of PVC waterproof noodles are better.