one,SkiletWhat is

Skiboard is a skiing equipment, which invented Nordic in the early 20th century to increase the speed of skiing during skiing.The structure of the Ski panel consists of a base, arched head, contact, edge, effective edges and bending points.Skiboards are mainly divided into two types: skiing veneer and Ski double board. With the continuous progress of technology, skiing boards have been differentiated into many different types.

2. There are several types of skiing boards

1. All Mountain Skis

This is the most common type. Most of the snow friends use this type. The all-round board can actually be classified as this column, with the waist width of 68-75.This type of board is generally reduced by 15 cm to 5cm.If you choose, look at the level and skiing habits.Beginners recommend that they choose short, good control, and good technology improvement.Senior skiers actually prefer to enjoy the fun brought by speed, so that the board must be relatively long.In addition, people with heavy weight should choose a little longer.

Just like its name, the goal of this Skiboard aim is to glide in any region.Its shape is very close to the Carving skiing, so it is still suitable for taxi on the compact snow surface.It is different from the Carving skilets in its waist width. Most of them are between 75 and 90 mm, which can give you more buoyancy in the snowy snow.There are many global skiing boards, all kinds of shapes and hardness, some like traditional traditions with Ski panels, while others look more like free -style skiing boards.

2. Carving Skis (Carving Skis)

Carving skiing board is the most used Skiboard for most casual Ski people.It is very suitable to glide on the compact snow trail and there will be a lot of fun.Generally speaking, the waist of the snowboard (the position under the foot of the Ski) is about 70 to 80 mm width, and the width of the head and tails exceeds 110 mm.This shape allows the Skiboard to slip along the edge of its edge.

3. Free -style Ski board

Free -style skiboards are very similar to wild snowboards, but they are not so wide.Its design goals are mainly targeted at gliding outside the snow road, but it can also slip well in the snow channel.It is slightly wider than skiing plates across the region, and its waist is generally between 80 and 100 mm.The mainstream free -scale Ski board will have some Rocker, and the board head and the tail of the plate are slightly raised from the side.This design helps skiing to float on various snow surfaces, and can easily change the direction of gliding. At the same time, it can also provide sufficient grip on the compact snow surface.

4. Wild Snow board (Powder Skis)

Wild snowboards are generally between 88-120.(Some people say that the waist width of the wild snowboards generally from 90 mm to 140 mm, and the length is generally 170 cm to 200 cm.) As mentioned above, wild snow buoyancy is the key.Choosing a wild snowboard is generally as tall as height, and such as those with a width of 110 or more, it is difficult for you to find boards below 176cm.You sink in the 5 -meter -deep wild snow, but it is difficult to get up.

Compared to the snow trail, the wild snowboard has a wider and longer body, but the snowboard elasticity is softer.The larger length and width can provide sufficient buoyancy in the deep and soft snow.Some wild snowboards have designs called Rocker or head and tails. Compared with ordinary snowboards, the wild snowboards start to rise up in the head and tail., To provide more control capabilities.There are also some wild snowboards that have the waistline that are opposite to ordinary snowboards, that is, the width of the head and the tail of the plate is narrower than the waist waist. This design is still to improve the buoyancy and handling in the powder snow.

5. Big Mountain Skis

The waist width of the high mountains and wild snowboards is usually between 90 and 130 mm. It is harder and longer than ordinary skilets.Takayama Wild Snowboards are usually 180 to 210 cm long. This snowboard is the favorite of extreme Ski people.

6. SLALOM Skis (SL Skis)

This kind of skiing plate is generally divided into large turns and small rotation.The level of skiers who can control the competitive board should be very high.Large turning boards are generally choosing a length of similar to their height, and small backboards generally choose the length of 15cm.But if you pursue speed, choose a little longer, so that the stability is higher.

Compared to the above -mentioned snowboards, the small competitive schola plates look very short. The length of the snowboard used by the fastest competitors in the world today is about 160 cm (but these people will not consider any shorter than 205 cm in previous years.To.The small turn board is dexterous and reactive. It can turn on the solid snow surface at an incredible speed, but this kind of board is not a good choice for the unsuccessful snow trail and deep snow.

7. Giant Skis (GS Skis)

The large back Ski board has a longer waist radius than the small backplane, and it is harder, so its turn radius is longer.It is also used to glide at high speed on a solid snowway, usually more length than the small turn board to enhance stability and grip.

8. Fancy skiing board (two-ends of skiing boards, TWIN-TIP Skis)

The two -ends are the favorite of those who like to challenge the semi -Tube snow trails and venue parks, and are also called Freestyle Skis.This kind of Ski board is very soft, and the tail is raised, and it can provide better tolerance when jumping up.Please try it before choosing a fancy board.At the same length, fancy boards can slide like the entire area plate. If the performance allows, a slightly shorter fancy board is also possible.

9. Cross Country Skis

The main difference between off -road board and all Alpine Skis mentioned above is that it is not only designed to slide from the landscape, it is very light and easy to wear in a vast area.Its fixed device allows the skiers to lift the heels of the Ski, walking as usual.Compared to other snowboards, in order to provide grip in the process of moving forward, its bottom bottom has texture.The usual skiing boards need to be waxed and choose different types of wax according to different snow quality, while it does not need to be waxed and easy to use.

10. Competitive off -road Ski board (Cross Country Racing Skis)

Competitive off -road boards are used to move quickly on compact Ski trails. It is very narrow and is not suitable for snowfills that are not opened on the road.There are two types of competitive off -road boards, one is a straight slip, and the other is the traditional pedal ice type.Because it is necessary to judge which type of snowboard is more suitable for yourself according to the Ski style, its own weight, and the local snow quality, only you can choose the Ski board through the above factors.

11. Touring Skis (Touring Skis)

This is a Ski board used by the Alpine Touring activity. This Ski board has a variety of width and style.The wider model, especially the type of metal edge, can travel through or engaged in Ski Camping activities in rugged terrain.The narrow and lighter model is generally used to travel on a gentle terrain or compact snow.Many people now use free Ski panels to replace the climbing board, which can adapt to more snow quality.Backcountry skiers usually need a pair of stop skating bands to the bottom of the snowboard to help climb.

three,SkiletWhat is the length

When choosing the length of the skiing board, the maximum is limited to the height of the wrist that does not exceed my arm, and the shortest should not be shorter than the crotch.Choose a long relief snowboard to use fast, good stability, short Ski board speed, slow fibrillation, poor stability.

For beginners, too long skiing boards are not easy to control, and it is difficult to turn it. It is not conducive to improving their technical level. Beginners are best to add about 5 cm with their height.Beginners should also choose skiing boards with large elasticity.Because this kind of Skiboard is not easy to bump when it encounters uneven snow surface, the braking effect is better, and it is easier to operate.

1. How to remove oil stains on cotton sports pants

The cotton sports pants are stained with oily stains to try the following methods to remove:

1. Salt:Cover the salt on the cotton sneakers with oil stains. If the oil is dry, dip the water on it, wait for the salt to completely absorb the oil, and then gently rub the salt to remove it.

2, cool body powder:The refreshing powder contains a small amount of surfactant, which can adsorb oil or penetrate into the knitted fiber, effectively remove the oil on the clothing, pour the cooling powder on the surface of pure cotton sports pants with oil, gently press the cool body powder with your hands with your handsLet it be fully fused with oil stains. Finally, wash the noodle powder with water, and the oil pollution on the cotton sports pants will be gone.

2. What are the precautions for cleaning cotton sports pants

The precautions for cleaning the cotton sports pants are as follows:

1. Soak in salt water before cleaning the cotton sports pants for a few minutes to play a solid role.

2. Neutral laundry solution, washing cotton sports pants, washing temperature below 40 degrees, too high temperature will cause fading.

3. It is not advisable to soak pure pants with washing liquid. It is recommended to wash and wash immediately to prevent the fabric from discoloration and shrinking. Dark cotton sports pants are washed separately from lightwear clothes.

4. It is not advisable to rub cotton sports pants hard to prevent the fabric from degenerating and unevenly fading the fabric.

5. Rinse the pants and the number of times should not be less than three times.

6. Pure cotton sports pants are poor in color. Do not use laundry powder and soap containing bleaching ingredients to avoid serious color loss.

7. Cotton sports pants are relatively poor. After washing, it is not advisable to twist strongly to avoid wrinkles and affect the aesthetic effect. It is recommended to squeeze the water lightly after washing.In addition, the light is avoided.

8. Pay attention to ventilation to avoid humidity to avoid mold.

9. After wearing a lot of sweating, wash it immediately to avoid fading or discoloration overnight.

10. You can use medium temperature or steam iron. The iron cannot directly contact the printing part and must not use high temperature.

In April 2022, the National Standardization Management Committee issued the "Notice of the National Standardization Management Committee on issuing the second batch of pilot projects for the second batch of consumer goods standardization" (National Standard Committee [2021] No. 35), which officially announced the list of second batch of pilot projects for consumer goods standardization.Pathfinder has become the only Outdoor supplies company selected in this batch, marking the leading position of the path to the first Outdoor brand in China.

The quality of consumer goods is related to the well -being and economic development of people's livelihood. The improvement of the quality of consumer goods with advanced standards is an important task to accelerate the construction of a strong country and a strong manufacturing country.The construction of a standardized system in the high -level consumer product field determines the quality and competitiveness of the enterprise. Therefore, the national standardization pilot is carried out, and the establishment of an international, modern, and standardized standardization system is of great significance to the development of my country.

As the first Outdoor brand in China, it has the largest domestic Outdoor product research and development center, has independent Outdoor product test laboratories, and the only domestic Outdoor clothing brand's only minus 70 -degree step -in low -entry low -temperature storage.From the beginning of its establishment, the laboratory has been working on the construction of a national laboratory, and has worked in accordance with the standards recognized by the National Academic Committee (CNAS).Over the years, road visits have insisted on independent research and development and technological innovation, and technology has continued to upgrade, and has achieved fruitful results.

In only 2020, the road visitors won 20 industry awards and won 8 patents.With a solid technological foundation and product innovation capabilities, it has been guided by the Department of Science and Technology of the Ministry of Industry and Information Technology for 6 consecutive years. The Chinese brand power index "industry first brand" released by China s leading brand rating related agency Chnbrand.At the same time, the road probe products have won various types of awards such as the Red Star Award and German ISPO.As one of the "integrated masters", TIEF, the Pathfinder Polar Poor Bionic Technology Platform, has also been deepened.A number of independent research and development results such as electrostatic technology and intelligent light transformation technology.At present, 25 national industry standards are involved in the formulation.

As a national standardized pilot unit in the field of outdoor products, the road visitor will deepen the implementation of the national standardization development outline, lead the industry's development with strength and mission, continue to deeply explore the development space of the domestic outdoor sports market, and continue to consolidate the company's operating management capabilities to improve the company's operation management capabilities, Constantly launch professional, technology, and fashionable outdoor sports shoes and equipment, to create the first Chinese Outdoor brand with vitality and growth.

What is Jordan Access?

This Jordan Access men's sneakers can be said to be the "twin brothers" of Air Jordan 1.Jordan Access men's sports shoes, equipped with Nike classic AIR cushioning configuration, have a soft bomb feet.The upper is combined with the combination of leather, synthetic material and fabric. It is comfortable and very breathable and very supportive.The tongue is embellished with the Jumpman character to strengthen the impression of the "flying man".

The color selection is more classic, the details use black and red color matching, orange black color matching, black purple color color, black and green color matching!These are the hot color of AJ1.

The shoes have also been upgraded very much in terms of breathability. The air -eyed pores are visible to the shoe body of Jordan Access. It can imagine its refreshing feeling before you put on your feet. It will not be so sultry in summer.

Jordan brand introduction

Nike sports (China) Co., Ltd., Jordan, ten major brands of basketball shoes, began in the United States in 1985. The famous American basketball player Michael Jordan first endorsed; it has a cooperative relationship with many NBA players.

The early Jordan shoes have not yet independently set up their own brand, but a brand under Nike. The logo of Nike Jordan shoes is still printed with Nike's big hooks. Later Jordan shoes independently set up a brand, and the boss was replaced by Nike to replacement to replaceBoss Joe, so it is called Jordan shoes.In addition, Nike Jordan is a product endorsed by Michael Jordan, a series of Nike products.The latter Jordan only used the brand created by the name Jordan. This Jordan has nothing to do with Michael Jordan.So it caused some misunderstandings to consumers.

Jordan brand online store inventory & gt; & gt;

1. Do you want to wear glasses on myopia ride?

Many friends are myopia, and they usually wear glasses, but if they are riding ordinary glasses, they have been riding for a long time, and they encounter the weather with bright or strong winds. The vision is prone to fatigue.I hope to wear ride glasses, so can myopia wears ride glasses?

The answer is yes. The riders of myopia can also bring Cycling glasses. Many Cycling glasses are equipped with myopia frame. Although the comfort is reduced, it can also solve the problem. If necessary, you can customize it by yourself.myopia version of Cycling glasses.

Some myopia friends also want to wear close -vision glasses to cycling, but it is not recommended, because it will be heavy when Myopia glasses are worn, and it will be uncomfortable to ride on the bridge of the nose. In addition, the frame of the frame will be small.Therefore, it is better to wear Cycling glasses.

Second, myopia Riding glasses solution Daquan

Riding glasses are one of the essential equipment riding, which can help block wind and sand, ultraviolet rays, but for myopia riders, choosing Cycling glasses is more troublesome. Here is how to wear myopia to wear Cycling glasses:

1. Double -layer Cycling glasses

That is, adding a close -up mirror frame to ordinary Cycling glasses. Many Riding glasses have this design, but this kind of glasses will also be worse.And because the myopia is close to the eyes, the degree and pupil distance need to be adjusted to a certain amount.

2. Customized Cycling glasses

Go to the relevant Cycling equipment store to customize the dedicated myopia Riding glasses, as if with glasses, after optometry or providing personal myopia, astigmatism, etc.glasses, but the price will be higher, it will be more troublesome if the myopia is deepened.

3. Wear Contact lenses

The combination of contact lens riding wind mirrors is relatively simple. Many friends of myopia rider will do this, but some riders do not like to wear Contact lenses.Another disadvantage to wear Contact lenses is that there will be some problems with dry eyes and eyes when riding for a long time.

4. Wind mirror integration helmet

The cylinder directly wore Myopia glasses, and then wears a cycling helmet. There will be a wind mirror on the riding helmet that can be used as Riding glasses. This method is simple to operate and the price is more affordable.However, the wind lens helmet that supports ordinary glasses needs to be found by itself, and it will be hot if it is riding in summer.