How to use different moisture -proof pad products

1. Inflatable moisture -proof pads

The inflatable moisture -proof pads are in various moisture -proof pads. It is the most comfortable and soft product to use, but be sure to pay attention to the use method, otherwise, if you are not careful, the moisture -proof pads that are full of gas may be leaked.Effect.

First of all, before use, you can use your mouth or aerated cylinder to blow or cheer the inflatable holes in the center of the moisture -proof pad. The automatic inflatable moisture -proof pad only needs to pull out the air mouth.After the moisture -proof pad is gradually full, put it flat on the flat ground, sit on the moisture -proof pad to check whether the air leakage. If the air leakage, after finding the air leakage, use a special tape for replenishment, and place it for 24 hours to ensure the moisture -proof pad repair and supplement.success.After the Camping is over, after the moisture -proof pad is put, roll it carefully and put it in the Camping set to prevent scraping.

2. Aluminum film moisture -proof pad

The moisture -proof cooker principle is mostly because the direct contact and heat transfer of the human body and the ground are isolated.If the human body is lying directly on the ground, it will feel cold after a while, and the moisture -proof pad can make the human body from exchanging calories in the ground. This is particularly obvious here.

The usage of an aluminum film anti -moisture -proof pad is very simple. Campaigns can be used to spread the side of the aluminum -proof moisture -proof pad aluminum film in the Tent or grass, which can be the most effective to separate the direct contact and heat transfer of the human body and the ground, so that the human body can make the human bodyKeep your body temperature and healthy entertainment activities in the Camping at night or long time.

3. Foam -type plastic moisture -proof pads

This traditional moisture -proof pad is actually the most simple and practical. First of all, there is no need to worry about the risk of leakage like an inflatable moisture -proof pad. Secondly, there is no need to worry about the front side of the placed.Worried about being scratched and damaged, you can use it at any time and store it at any time, which is very convenient.

When a campers are on the grass, or in a Tent, you only need to place the foam -type plastic moisture -proof pads on the flat ground, that is, the short -term human moisture -proof and isolation of the ground cold air can be ensured.

There are also many other types of moisture -proof pads. The method of use is basically close to the above three types. You only need to use it according to the instructions.These small details are valued, which can greatly improve the use of tide -proof pads.

What are the precautions for Outdoor moisture -proof pads

1. It is best to use the Outdoor moisture -proof pads together, so that it can reduce the wear during exercise and extend the service life.

2. In order to extend the service life of Outdoor moisture -proof pads, please do not fold it, just roll it and save it.

3. During the travel process, the moisture -proof pad is generally hung outside the Backpack.

4. Automatic inflatable moisture -proof pads should make it automatically inflatable. Do not use mouth to replenish qi. The water vapor in the mouth will affect the service life of the moisture -proof pad.

5. When using Outdoor moisture pads, the ground should be flat. After removing debris such as stones and branches on the ground, spread the moisture -proof pad to avoid damage to the moisture -proof pad.

6. Most of the materials for moisture -proof pads are flammable. Pay attention to fire prevention. Do not use stoves, smoke, etc. on it.

What are the types of fish lines and fishing ships in the type of fishing wheel

1. Types of fishing wheels

The fishing wheel is also called a fish wheel and wound wheel. It has the function of storage, closing lines, and launch. Its wheels are equipped with dragging equipment. It can be adjusted when fishing fish.There are many types of fishing ships, and there are several common fishing ships:

1. Flying and fishing Ship

What are the types of fish lines and fishing ships in the type of fishing wheel

Flying fishing wheels are single -axis fishing wheels. There are no automatic storage lines on the wheels. If the line is closed, it must shake the handle and shake it in a circle.This brings some difficulties to quickly close the line after fishing.However, this round is equipped with a drainage device, and the tone of the drainage is positive to control a knob to control.Before fishing, it is necessary to adjust according to the intensity of the fishing line. It is very difficult to adjust it after the fish is hooked.

2. Rotary fishing wheels

What are the types of fish lines and fishing ships in the type of fishing wheel

The rotary fishing Ship is also called a spinning fishing Ship, which is the most commonly used universal fishing wheel.It does not move the winding shaft, and uses the rotation of the rotating frame connected by the rolling shaft to wrap the fish wire around the line shaft.It has the characteristics of small qualification resistance, fast speed, difficulty in random lines, simple operation, wide range of use.There is a drainage device on this fishing Ship, which can adjust the resistance of the launch and play a buffer effect.When fishing, it can automatically release the line with the tension of the fish and adjust the line resistance without being pulled by the fish.

Depending on the positioning of the drain knob, the front drainage type and the rear draft force type are different. The former is located at the front end of the rolling line, and its structure is simple.But the resistance of the outline is not accurate enough.The latter is installed in the back of the wheel body, which can accurately adjust the output resistance, good performance, but the price is more expensive.

3. Closed fishing wheels

What are the types of fish lines and fishing ships in the type of fishing wheel

The structure of a closed fishing carrier is basically the same as the rotary fishing Ship.The difference is that there is a hood outside the winding wheels of the closed fishing wheel. The fish line passes through the holes in and out, and the fisherman's keys control the collection line.It has the characteristics of small size, light weight, and not easy to chaos.However, it has a small storage line, and it is not advisable to shot far and fish.

4. Drum -shaped fishing Ship

What are the types of fish lines and fishing ships in the type of fishing wheel

Also known as dual -bearing fishing Ship.Both the bearing of this wheel is equipped with bearings on both sides, and the shaft heart disk is fixed on both sides, similar to the drum shape, so it is called a drum -shaped fishing Ship.This fishing Ship is precise, durable, large, and excellent in performance. It is the best fishing set of deep -sea fishing and boat fishing.Generally, the fishing force of the drum -shaped fishing wheel is more than 20 kg, and the fishing force of large drum -shaped fishing wheels can reach 70 to 80 kg.The improved drum -shaped fishing wheels are equipped with electronic calculators, which can display the depth of water in the water, the length of the outline, the length of the wheel memory cable, and the signal reaction when the fish swallow hook.You can use the power supply on the boat when fishing. Drive the fishing wheel automatic line.The shortcomings of this fishing wheel are that the rotation speed of the fishing Ship during throwing is often faster than the outcomes. If it is not well mastered, the phenomenon of chaos will occur.Electromagnetic braking devices have been added to the current double -bearing fishing ships produced abroad to make up for their shortcomings.

Second, the connection method of fish line and fishing Ship

There are two ways to connect the fish wire and the fishing wheel. One is to cooperate with two people. One person holds the fishing wheel in one person, and the other person holds the line plate, tie the line set to the roller plate, and shake the handle.The line is wrapped on the roller plate.The other is: use a thread to install the thread.This method is simple and easy to operate.Put the fish wire on the wiring wire to load the line as long as the handle of the fishing wheel.

What are the types of fish lines and fishing ships in the type of fishing wheel

The connection method of fish line and fishing Ship

When installing the line, you should pay attention. Do nt install it too much, you should be slightly lower than the storage slot to avoid random lines.After the line is installed, the fishing wheel is installed on the pole, and it is fixed.Then adjust the drainage.The drainage size is generally adjusted according to the 50%one 60%size of the tensile of the fish line.If the fish wire is 4 kg, it can be hung online, one 2, 2, 2.5 kg. Under this weight, the rolling line is automatically put on the line, which is adjusted.If there is a spring scale to adjust the drainage, it is more accurate.After the adjustment, do not move again, but you need to do regular inspections.Types of Fishing rods & gt; & gt;

1. Is the inflatable mattress easy to leak air?

The inflatable mattress is made of PVC, which is very flexible. It is very suitable for making inflatable products. The air cushion bed produced by regular manufacturers is strong and durable.Leak.

2. What is going on slowly omitting the air -inflatable mattress?

The inflatable bed is easy to carry, and it can be used indoors and Outdoor. It is a very easy -to -use Mattress, but when many friends use an inflatable mattress, they will find that the inflatable mattress will slowly leak air. What is going on?

In fact, the reason why the inflatable mattress is leaked is mainly because of the wear of the product. After a long period of use, there will be some invisible air leaks. This is normal; if there is more leakage, you can replenish the gas again.

In addition, because the inflatable mattress is made of PVC, if it is pierced by sharp metal, or the high -temperature object is approaching, the inflatable mattress may be broken, causing air leakage.

3. How to make up the inflatable mattress leakage

If the inflatable mattress is broken or scated, it can be repaired by method:

1. Repair needle eye

The inflatable bed accidentally tied one or more small stitches by the abandon or wooden thorns. This situation is easier to repair:

(1) Put the bed and cover the breath to reduce the gas flow in the bed.

(2) Take out the glue in the repair package and drop a drop of glue on the needle eye.

(3) If the acupuncture eye is large, take a toothpick, use the toothpick to point the glue, apply it into the damaged needle eye, and then use the glue to fill the acupuncture mouth.

(4) Repairing, wait for four hours, then inflatable.

2. Repair or scald the mouth

If the inflatable mattress is cut or broken by a knife or was burned by fire, you can repair it in the following methods:

(1) Put the bed and cover the breath to reduce the gas flow in the bed.

(2) Find the patch material in the repair package and cut it.

(3) Apply the glue to the destruction, press the patch, and use the glue to stick the patch seam.

(4) Apply pressure to ensure that there are no gaps on the surface of the glue, and press it with Smooth and heavy objects.

(5) Wait eight hours and then inflatable to complete the repairs.

3. Velvet repair

(1) Carefully clean up and repair the area. After drying, take out the patch and cut it, cover it on the destruction surface, and allow a little more around.

(2) Apply a layer of glue on the patch and damaged surface, and stick the patch seams with glue to ensure a thorough seal.

(3) Press it with Smooth and heavy objects, and then inflatable after 24 hours.

If an inflatable mattress is damaged in large areas, it can be sent to the seller for repair within the manufacturer's repair range; if it exceeds the repair range, it can only be scrapped.

1. How to open the blade with speed skating knife shoes

The just -bought Ice knife shoes need to be used to use it. The ice knife is not open because the blade is blunt, and it cannot be eaten on the ice.There are generally three blade methods of Ice knife shoes:

1. Mechanical grinding

Motorcycles are processed by professional machines.

2. Semi -mechanical grinding

Use sand wheels to grind the blade. Due to the large wear, it is only suitable for rough grinding, and then manually polished.

3. Manual grind

The cost is low and the effect is good. People who have high requirements for skating quality are manually grinding by themselves.Speed skating knife shoe handmade grinding is generally flat grinding: fix the ice shoes on the grinding shelf, bring gloves, and carefully check whether the two knives are on the same plane.You can use the large sand wheels back and forth a few times to see if the grinding marks are uniform.After confirmation, use the large sand wheel (30cm diameter) to make the "8" shape, until the burrs appear on both sides of the blade, and the rough grinding is completed.Then use coarse oil stones to continue making "8" fonts until the grinding traces are particularly small. After removing the knife surface and the burrs on both sides with fine oil stones, a pair of shoes is worn.Remove the ice shoes and clean the surface dust and residue.

Second, Ice knife and shoes are standard

To what extent to open the blade of Ice knife and shoes is a question that many friends are more concerned about. In fact, the Ice knife shoes have no specific labeling. Generally, the thumb is dried up.There is a depression.

3. precautions for Ice knife shoes

1. If the blade requires a high blade, you can choose to grind the knife, but if you are not a professional ice skaters, it is not recommended to choose hand -grinding, because the degree of grinding when the knife is grinded is difficult to grasp, it is easy to put the ice knife knife.Follow.

2. In order to prevent the damage of the blade and reduce the service life of the ice knife, it is recommended that beginners and enthusiasts try to choose professional mechanical grinding when grinding the knife.

3. The skate -Ski knife is a fine work.

4. The knife of the ice shoes has two blades inside and outside. Before the ice knife, you must first see if the inside blade is as flat as the outer blade.

5. Beginners are afraid of falling, and often use the inside blade to contact the ice surface. After a long time, the inside blade is lighter than the outer blade. At this time, you must first use the flat wheel to make the inside blade generally high, and then use the grinding gap.The sand wheel grinds a gap between the inside and outside.

6. In order to ensure the flatness of the ice blade surface, the eyes must follow the ice knife closely to avoid wear.

1. Is the Bicycle helmet in one -time?

Bicycle helmets can be used multiple times under normal use and proper maintenance, and provide long -term head protection for cyclists.

Although the Bicycle helmet is not disposable, after being severely impacted or damaged, it should be stopped and replaced with a new helmet.After the helmet is impacted, its internal structure and material may have been invisible, and it will no longer provide sufficient protection.

2. How long is the shelf life of Bicycle helmets generally

For the use time of the Bicycle helmet, many riders think that the life of the helmet depends on when it is broken or broken, and then discard it.So will there be hidden safety hazards after a certain period of use of the Bicycle helmet?How many years can the helmet do not collide?

Generally speaking, the Bicycle helmet is valid, because the helmet is exposed to sunlight, calories and other elements for a long time.In addition, the helmet will inevitably fall when used, which will damage the internal structure of the helmet.

The general recommendation of some brand helmet manufacturers is to replace the Bicycle helmet once in three to five years, mainly because the Bicycle helmet needs to face various complex conditions for outdoor products, such as high temperature, ultraviolet rays, deep cold, drought climate, and humid climate.Seasons, temperature, sweat, etc. The materials that constitute our helmets will be degraded over time, which cannot meet its test standards. Therefore, it is difficult to protect the safety of the head after three to five years.

The materials used in the Bicycle helmet are all shattered materials when they are hit. When the head hit hard objects, the helmet will absorb a certain impact and cause rupture to achieve the role of protecting the head.After any collision, replace the old helmet in time to ensure its best performance.

It is worth noting that whether or not you fall or collide, it is recommended to change the Bicycle helmet once as possible in three to five years.Although the helmet has not collided, the sun exposure and sweat erosion can make the helmet and accessories aging, thereby weakening the protection performance of the helmet. No matter how expensive the helmet is, it is not as expensive than the head of the head.