1. How to install the balcony anticorrosive wooden Flower stand

Although anticorrosive wood, anti -mildew, mildew, moisture -proof, insect -proof and other properties are prominent, and they have better durability.However, due to the special environment, if you pay attention to the correct installation method, it will greatly extend its service life.

1. Pay attention to leaving an extension joint when installing

When installing anticorrosive wooden Flower stand, the gap between 0.2 to 1cm of anticorrosive wooden Flower stand is generally determined by the water content of wood. When the water content of wood exceeds 30%, it should not exceed 0.8cm.The expansion of anticorrosive wood.In addition, anti -corrosion columns with a thickness of more than 50mm or more than 90mm can be opened on the back.

2. Select the hardware connection that is not easy to rust

The hardware is made of stainless steel, hot -dip galvanized or copper, which mainly avoids rust corrosion in the future and affects the connection fastness.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

3. It is best to paint protective coatings after installation

The damaged part of the anticorrosive wood processing should be painted with preservatives and Outdoor protective coatings.Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laying of the wood, and then the sand is light. If you want to have a better effect, you can also apply Outdoor protective coatings after cleaning the surface.

4. Pay attention to the protection of finished products

After painting the external protective coatings or oil -based coatings of anticorrosive wooden Flower stand, in order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective membrane formed by the anti -anticorrosive wooden Flower rack surface layer.If you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.

2. How to maintain the balcony anticorrosive wooden Flower stand

1. First of all, the anti -corruption wooden Flower stand should be laid in a suitable place. The unevenness of the terrain will affect its original structure. It can be solved by pads.

2. The Flower stand that receives rain outdoors will inevitably be continuously attacked, so it is regularly dried on the wood, so that the water that can enter the internal entry can be evaporated to avoid being destroyed in the internal structure.

3. Repair the damaged part, because if it is not repaired, it destroys the anticorrosive layer, then the rust and the internal damage of the metal accessories are possible.So a certain time must be corrected and checked.

4. Large -scale correction is necessary. It can be positioned once a year for paint or waxing.After a correction, the Flower stand is basically scrapped after waiting to be aging.

1. What material is the balcony Flower stand?

1. bamboo and wooden Flower stand

bamboo and wood are natural materials. The flower stands made of processing are generally retained with the original bamboo and wood color and texture, which looks very natural and simple.And these two materials are relatively simple, which can be made into large courtyard flower stands according to demand, and can also be processed into small indoor flower stands.It has also changed in many ways in shape, and columns, gallery, suspension, stepped, etc. are more common.However, bamboo and wood are poorly durable. bamboo and wooden flower stands are generally placed in the courtyard or other parts of the room must be preserved. Otherwise, it is easy to rot in water and affect use.

2. Stone Flower stand

flowers with marble and granite as raw materials are generally set up in the courtyard. They use gallery frames and columns such as corridors and columns.It is one of the components of the garden landscape.In addition, the stone Flower stand is thick and durable, has good waterproof fire resistance, and does not cause rot.However, due to the bulky stone, inconvenient transportation, and difficulty in processing, natural stone is often used as the column design of large courtyard flower stands to increase the stability and durability of the Flower stand.

3. Metal Flower stand

There are many types of metals, and most of them are light and durable, so they are often used as raw materials for flower stands.Among the metal -made flower stands, iron art stands are the most common. They are generally used as indoor flower stands. They are beautiful in shape and small. They can be moved as needed and more flexible.Of course, the iron Flower stand can also be placed outdoors to decorate the courtyard.However, because the metal absorbs heat, it is not suitable for placing climbing plants to be placed by the sun -based iron Flower stand, so as not to damage the tender leaves.In addition, most of the metals are easy to rust and corrosion, so the surface needs to be supplemented by paint for protection.

4. Concrete Flower stand

The flower stands made of reinforced concrete are generally large and cannot be moved. Therefore, it is mostly used as an Outdoor Flower stand. It can be designed in a gallery column. It can also be made into arch.Of course, this kind of Flower stand can also be prepared in advance according to demand, and then these flower architectures can be assembled and combined on the spot to form a complete and firm Flower stand.The scope of reinforced concrete Flower stand is relatively wide, and it is also the most frequently used in courtyard flower stands.

5. Plastic Flower stand

Plastic generally uses synthetic resin as the main raw material, and adds some other auxiliary objects and additives. It can be made into various shapes according to the needs.Plastic flower stands are generally small in size, but because of the variety of shapes and a certain amount of corrosion resistance, it can be used as a terrace Flower stand.However, compared with the above -mentioned flower stands, the environmental performance of plastic Flower stand is relatively poor.

Second, balcony Flower rack buying skills

1. Select the size of the Flower stand according to the space pattern

The Flower stand has different specifications. Consumers should determine the placement of the Flower stand and the size of the space before buying, and then choose the appropriate Flower stand.

2. Choose the Flower frame material as needed

The Flower stand has different materials such as wood, iron, and root carvings. When purchasing, consumers can choose flower stands of different materials according to factors such as potted plants, indoor decoration and other factors.Generally speaking, the iron shelf focuses on the European style, and the wooden Flower stand is heavy in the pastoral style, but according to the color of the Flower stand, there are different shapes and meticulous distinction.The selected Flower stand should be consistent with the overall style of the furniture and achieve harmony and unity.There are many colors of the Flower stand. The selection should be lined with the overall color of the home. For example, most of the home soft furnishings use warm colors, and the Flower stand should also choose to match the same color system accordingly.

3. Select different flowers according to the installation form

The Flower stand has two mobilized and wall -mounted installation methods. If you want to install it on the wall, you can choose a wall -mounted type. If it is placed on the balcony, you can choose a mobile type.If it is a plant such as Hanging orchids, you can choose a wall -mounted Flower stand, which looks more against it.in the case ofPotted plantA type of plant can choose a mobile Flower stand.

Third, balcony Flower stand tips

The balcony Flower stand is generally installed on the balcony railing. In order to use the space, it extended to the outside of the balcony. Therefore, only one side of the side of the balcony railing is a focus point, and the other part of the balcony is used.Lead wire Hanging force.For safety, it is best to add support under the part of the Flower stand outside the balcony to add support, which is stronger, safe and reliable.The three parties outside the balcony are stretched out of the balcony, and the steel bars or wooden boards should be used to make a block of about 15 cm high to prevent the Flower pot from falling.Some flower stands on the balcony have not been blocked. When drying clothes or other housework activities on the balcony, accidentally touched the Flower pot, and it was smelled.Notice.

1. How to place the Flower stand

1. Porch partition

Modern families use soft partitions in the living room, restaurants, or porchs, but although soft partitions such as glass and bead curtains increase the indoor permeability, it will inevitably look monotonous.Therefore, the Flower stand was placed at the entrance at the porch to increase creativity and aesthetics.

2. Corner

Whether it is the corner of the door or in other corners of the living room, a retro -shaped iron Flower stand can be placed.

3. Under the wall wall

If the wall designed by the photo wall is blank, it is definitely the best choice to put a Flower stand.

4,Both sides of the TV Background wall

In addition to the above matching methods, the interior can also be placed on both sides of the TV Background wall. If the style of the Flower stand can be consistent with the TV background wallpaper wallpaper, the effect will be better.It is also possible to choose to place next to the sofa, but people often walk around the sofa, pay attention to safety.

Second, the living room Flower stand placed Feng Shui

1. Don't just right to the door

Try to avoid the appearance of the door when placing a Flower stand in the living room, otherwise it will easily lead to worse Feng Shui in the home, affecting the normal development of our normal life and fortune.

2. Don't place it at the aisle

When we are placing a Flower stand, we must also avoid placing the aisle, because there is a channel for the crowd, and if it is placed on the aisle, it is easy to scrape the flowers.

3. Do not have edges and corners in the Flower stand

When the Flower stand is placed in the living room, be careful not to have corners, because the living room is where there are many crowds. If the Flower stand with edges and corners is likely to scratch people and bring bloody disaster to the home.

1. Advantages of carbonized wooden flower frames

In the villa courtyard and Outdoor garden landscape, the Flower stand is essential.The Flower stand is generally used for Outdoor, so the material must be wood -resistant and stable wood, and in my country's existing wood, Carbonized wood is the most suitable.The carbonized wooden Flower stand is generally composed of four parts: columns, top beams, beams and horizontal stalls.

The carbonized wooden Flower stand made of Carbonized wood, compared with other materials, has its own advantages:

1. The texture of the carbonized wooden Flower stand is clear and beautiful.This feature is more natural than other wooden flower stands, and all textures are naturally natural. Compared with iron steel flower stands, carbonized wooden flower stands are more integrated with nature.

2. The stability of the carbonized wooden Flower stand is strong, it is not easy to deform and crack, and the service life is long.

3. The corrosion resistance of carbonized wooden flower racks is stronger than other wooden flower stands.

two,carbonHow to choose a wooden Flower stand

1. Clarify the use environment of the Flower stand.If you use a carbonized wooden Flower stand indoors or in a non -open -air environment, you only need to choose ordinary surface Carbonized wood to meet the needs.If it is placed outdoors for a long time, long -term and underwritten sun exposure and rainwater, you need to choose deep carbonized wooden Flower stand. General surface Carbonized wood cannot meet the needs.

2. Carbonized wooden Flower frame color, texture selection.The choice of color and texture is mainly to consider the harmoniousness of the natural landscape of flower stands and flowers and plants, and it should not be too abrupt.

3. Health and environmental protection.When choosing a carbonized wooden Flower stand, carefully check whether it is environmentally friendly and whether it will produce harmful substances.

1. The characteristics of anticorrosive wooden Flower stand

1. Anticorrosive wooden Flower stand is a shed Flower stand that is specially used for Hanging flowers and plants. It is made of special corrupt wood. It has a variety of characteristics such as natural, environmental protection, and moisture.Rural style.

2. The anticorrosive wood Flower rack has a strong ability to prevent the moth, which can fully dissolve the killing of fungi and viruses. The anticorrosive wood is a type of corrupted wood. It contains a lot of solubitives in itself, which can effectively prevent the bites of the worm.

3. The anticorrosive wooden Flower rack has the characteristics of moisture -proof. It will not rot if it is moisture like other wood, and the durability is particularly strong.

4. In the anticorrosive wooden Flower stand, contains a lot of discoloration factors, so it will not cause harm to the wooden appearance tissue. Under suitable conditions, part of the discoloration factor will generate many cellulose, which can form a protective layer on the outer surface to form a protective layer.For internal wood, it plays a good protective role.

2. The purpose of anticorrosive wooden Flower stand

1. The most important purpose of anticorrosive wooden Flower stand can grow beautiful flowers around the Flower stand, or some Teng Man's plants, which helps the plants grow along the Flower stand.To a better growth environment, it can also play a certain decorative role.

2. The anticorrosive wooden Flower stand is very beautiful. After exquisite design, you can not only decorate the room, but also put it in the yard. As a shaded rest, it is a natural percux, which can be used for users to rest and appreciate the scenery.

3. Anticorrosive wooden Flower stand can be used for family decoration, creating a natural decoration environment of the countryside. It can also be used in the Park, which can beautify the natural environment and create a rest place for passers -by.In the garden plant training base, it creates a natural environment for the growth of flowers and plants.

3. How to install anticorrosive wooden Flower stand

With the development of bionic technology, the bionic invention of anticorrosive wooden Flower stand has gradually been applied to life.Therefore, the anticorrosive wood designers pay attention to the imitation results, and also pay attention to the laws of natural changes.But how to install anti -corrosion wooden flower stands to be stronger?

1. Method paving method:Use stainless steel cross screws to connect to the keel on the front of the anticorrosive wooden Flower stand; fix the keel on the opposite side of the Flower stand with screws, and make a few compositions into a whole. It will not destroy the ground structure, but also freely disassemble and clean it.

2. Fixed laying method:Fix the keel on the ground with expansion screws, and the expansion filaments are made of nylon (better anti -aging).

3. Suspension laying method:The keel can be connected to a frame or a well -character frame structure on the ground, and then laid the Flower stand.

The specific measures are as follows:

1. Treatment of the grassroots level of the wooden structure: During the design and construction, the air circulation between the anticorrosive wood and the ground should be fully maintained.

2. When making and installing anticorrosive wooden flower frames, 0.2-1cm gap between anticorrosive wood should be left (then determine the gap size according to the moisture content of the wood, and the water content of the wood should not exceed 0.8cm.The expansion of water and anticorrosive wood.

3. Fang columns with a thickness of more than 50mm or more than 90mm are opened in the center of the back of the back.

4. Hardware to avoid rust corrosion in the future and apply stainless steel, hot -dip galvanized or copper materials.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

5. Use the existing size and shape as much as possible. The damaged part should be painted with preservatives and Outdoor protective coatings. Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laid.Light again, if you want to have a better effect, you can paint Outdoor protection coatings after cleaning the surface.In the case of a rainy day, it is best to cover it with plastic cloth first, and then brush out the Outdoor protection coatings after the sun is clear. It should be avoided within 24 hours after painting.

6. Surface user external protective coatings or oil -based coatings are applied (only once). In order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective film that has been formed by the anticorrosive wood layer.EssenceIf you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.