1. What are the benefits of electric scissors to pruning fruit trees

Electric branches and scissors are a kind of efficient, ecological, safe electric branches and scissors. They can cut fruit branches such as apple branches, grape branches, mulberry branches.Good helper for production.The advantages of electric scissors are mainly:

1. More efficiency

Electric scissors are powered by electricity. Its pruning efficiency is 2 to 3 times that of traditional hand -cutting efficiency, and electric scissors can also be trimmed in both directions. It is more suitable for trimming or shape than ordinary scissors.And in the past, it was unbearable to use manual scissors to trim fruit branches for a long time and arms, while electric scissors would not have this situation.

2. Good durability

The supporting structure of the electric scissors is simple, the operation is stable, the failure rate is low, the blade cutting capacity and life are high, and it can be used for a long time under normal use and regular adjustment.

3. High pruning quality

The performance of electric scissors is stable, and the quality can meet the requirements of Gardening. Under the correct operation, the flatness of the fluff surface is better than manual trimming, and there is basically no leakage.Compared with manual scissors, the fruit branches that are trimmed by electric scissors are closer to the natural growth state. The canned crown surface is larger. The trimmed surface is neat and beautiful, and the buds and leaves are sprouting and sprouting.

4. Good safety protection

Electric scissors have a good safety protection function. The blade follows the wrench. When the stuck is stuck, the circuit self -inspection process will start motor monitoring, and protect the motor without burning.The protection function of both sides of the motor (DC -free motor) is controlled by Hall chip switch.Rewarding the trigger position will open the cuttings and then close.The stress of the battery over loading is overheated and over -discharged and the discharge will be maintained by the protection of the circuit board.

2. What should be paid attention to when the use of electric pruning is trimming

With the development of technology, electric pruning has become an indispensable Tool for garden operations. Electric branches and scissors are not only more laborious when the method is wrong, but also may affect the service life of electric pruning.Pay attention to some matters:

1. When using electric pruning trimming and accessories, we must comply with the instructions and use methods of use. At the same time, the working environment and the work they want to complete should be considered. The use of electric pruning and trimming as a operation that does not meet the requirements may cause danger.

2. Electric pruning pruning requires professional training to use, so that the unfamiliar electric pruning trim or those who do not understand the use instructions are very dangerous to use without training.

3. Do not cut the branches of the working range of the scissors. Do not cut too hard things such as metal, stone and other non -plant materials. Do not clamp the Tool with tiger clamps. If scissors are worn or damaged, please replace the scissors.

4. Electric branches should be kept clean before and after use. After use, use clean cloth to clean electric branches, batteries and chargers, and use soft brushes or dry cloths to clean the dust on the scissors head. Do not use it. Do not use it.Any corrosive or solvents cleaner.

5. Use the equipment correctly according to the instructions of the use. Do not use electric branches, batteries, and chargers. Do not use electric branches, batteries, and chargers in any liquid.

6. Make sure that the switch is closed when adjusting, replacing attachments or storing electric branches, and avoids the risk of electric branches and cutting unexpectedly.

7. The idle electric pruning is trimmed in the blade closure and stored outside the child.

8. After use, the dirt should be removed first, and then the dirt should be removed first, and then the lubricating oil or oil is lubricated on the contact part, so that the blade is in a normal maintenance state. This can reduce the resistance and extend the life of the blade.

1. What types of garden cuts

1. Pruning

The use of branches, cutting and cutting flowers and trees is the main method of coordinating the reasonable growth of various parts of the flower and trees, maintaining tree shapes, promoting flowering results, and preventing and controlling diseases and insect pests. More importantly, the incision is neat and not easily damaged.

It can be trimmed throughout the year. If the trees in the spring and summer are long -term, you can cut the diseased branches, withered branches and weak branches at any time, and cut or cut short branches.Before trimming, divide the growth direction of the branches and buds, and to choose correctly.A branch bar is usually bud eyes on the left and right sides. If you want to make the branches develop to the right, the branches are cut short in front of the right side of the ideal length of the branch.Because the buds of the trees have the advantages of the top growth, the buds at the top of the branches are the fastest. After the growth of the new branches on the right side, it has achieved the purpose of developing to the right, and vice versa.

Scope of application: various small plants pruning, shrub fruit trimming, etc.

2. Gardening big scissors

The edge of the garden scissors (branches) is round, which is used to trim bushes.When cutting the pruning, the force used makes the upper blade gradually enter the branches, and the lower mouth plays the role of supporting the branches, and the branches do not break.In addition, branches are very effortless to use.General scissors have scalable designs, which can adjust the force arm suitable for different users!

It is, but before you start, make sure that the scissors and plants have a 90 vertical relationship (to prevent the cutting of the shear from constantly being awkward), and try to get the end of the blade near the plantYou will find that the blade and knife handle of ordinary scissors are not in the same plane. It is also a effortless design for the consideration of leverage.The three words are summarized: fast, accurate, and ruthless!

Scope of application: shrubs trimming, grass pruning, etc.

3. Coarse branches

Rough branches are also known as branches cut, vigorous cuts, and high -cut.Garden cutting tools can cut 0-4 cm coarse branches, similar to tiger pliers, which are a must-have for wooden tree.The shape of the knife head is straight, the berth shape or the mouth shape of the knife, and the hand is cut.Although the quality of rough branches is generally reliable, it should not be cut dry and soft wood.

The rough branches cut two blades are different. One is to use the use to cut one is blunt thick used to squeeze so the use method is similar to pruning (pay attention to the cut part of the cut part and remove the section), but when operating, it must be based on the branch.The length of dryness and your strength to adjust the length of the force arm (most of the rough branches are scabbing design now).

Scope of application: trimming and shrub trimming.

4. High -altitude cutting

High -altitude cuts are composed of fixed cuts, cutting slices, cuts, and sawing, and are installed on the same centered axis in turn.Among them, the fixed scissors are consisting of integrated shovel, hook knife composition (outer shovel hook).The cutting piece is parallel to a spine wheel, and the scissors are matched with a scissors to form a scissors.

The cutting handle is a suite, and the built -in activity adjustment mechanism can tease and shrink in the air (extended or shortened the shear), and use the principle of leverage to determine the power arm length.There are spiny paws with a handle, which can mobilize the spiny rotation and pruning operation.There is a positioning buckle on the saw handle, which is matched with the buckle door set on the fixed scissors.

Scope of application: high -altitude garden trimming, fruit tree trimming, etc.

2. What are the use of Gardening?

1. Reasonable distribution of branches and leaves.That is, on the basis of plastic surgery, the branches and leaves of each part of the crown are adjusted dense, distributed direction, and leaf area coefficients to maximize the effective photosynthetic area of the canopy.

2. Adjust growth and results.Make the nutrition growth normally but long; the appropriate amount is flowers, strong but not weakening the trees; at the same time, it can prevent the fruit tree from aging in advance and update the reunion in time.

3. The proportion of branches composition.Different tree species and age requirements have corresponding and appropriate proportion of branches in order to enable the operation, distribution and consumption, accumulation of nutrients in the age of the year growth cycle, and coordinate according to the normal growth and reproductive rhythm.

4. Pruning can also balance the growth potential between group plants and the main branches on a plant, so as to achieve a balanced output and facilitate management.In addition, trimming is also a means to coordinate the growth of the ground with the root system.

1. What is the structure of electric scissors

Electric scissors are used as the power of the motor, and the handheld electric Tool that drives the work head through the transmission mechanism to drive the cut operation. The specific part is composed of the following parts:

1. battery: Most of the electric scissors are lithium batteries. They have large capacity and light quality. They are usually equipped with 1.5m long power cords, chargers and backpacks. The power cord cannot be cut off.There is also a battery with electric scissors on the handle, which is usually small.

2. blade: There are two types of dynamic blades and fixed blade. The quality of the blade is directly related to the pruning effect and pruning efficiency. Pay attention to the material, workmanship, and service life of the blade.

3. Body head: Not all electric scissors have a knife head. Generally, 3 cm electric cutting has a knife head, and 4 cm electric scissors have no knife head.

4. Extend rod: It can be used to trim higher branches and leaves. The length of the lengthened rod is generally 1.3-1.9 meters.

5. Others: Including lubricating oil, rubber skid cover, etc. These tools can make electric scissors more convenient and smoother.

2. What is the working principle of electric scissors

Electric scissors take electricity as the source. When working, the controller switch starts and starts with a brushless motor. Drives the eccentric axis-connecting mechanism through the reduction box, so that the knife rod is driven by the head of the knife head.Do not move on the blade to complete the pruning of the branches.

3. How to use electric branches and scissors

Electric pruning trimming is used for cutting and trimming and trimming, and trimming, picking, etc. of fruit branches below 30mm. The use of simple and convenient use, good pruning quality, and the use of electric pruning trimming is:

1. Open the special Backpack and put the electric pruning and battery in the corresponding storage package.

2. Put the electric branches and pruning and connect the power supply through the Backpack and connect to the battery, and wear a Backpack (put the scissors power cord into the specified fixed buckle of the strap to prevent it from cutting to the wire)

3. Take out the electric branches and trimming, turn on the battery power switch, and will make a "drop" sound, which represents the normal power supply of the battery.

4. Continuously and quickly deduct the trigger 2 to 3 times, and the blade will be opened automatically.

5. Before work, pull the trigger to make the blade aircraft run several times. Listen to whether there is no sound or too fast and too slow, and start working after normal.

6. The opening size of the blade: Press the trigger, and when you hear the two "Didi" sounds, the trigger will be released immediately, and the size of the blade will automatically convert.

7. After the trim is trimmed, long press the trigger, hear the three sounds of "Didi", release the trigger, automatically close the blade, and then turn off the battery power switch to collect it.

Note: During the long -term use of the machine, the grip heat is normal; the blade of the scissors needs to be maintained regularly. When the branches are completed or needed to replace the blade, the blade is opened to add lubricating oil between the blade.

1. The difference between garden scissors and ordinary scissors

1. Ordinary scissors are long and short.Gardening scissors, short blades, long.It is mainly to use the principle of leverage to increase the force arm, because branches are always harder than paper -cutting and cloth.

2. The edge of the ordinary scissors is a straight line. When it is used to cut the branches, the upper and lower blade mouth is pressed on the branches, which is easy to press the branches.The edge of the Gardening scissors (branches) is round. When cutting the pruning, the force used makes the upper blade gradually enter the branches, and the lower mouth will support the branches, and the branches will not break.Furthermore, branches are very effortless to use.

Second, the purpose of Gardening

1. Reasonable distribution of branches and leaves.That is, on the basis of plastic surgery, the branches and leaves of each part of the crown are adjusted dense, distributed direction, and leaf area coefficients to maximize the effective photosynthetic area of the canopy.

2. Adjust growth and results.Make the nutrition growth normally but long; the appropriate amount is flowers, strong but not weakening the trees; at the same time, it can prevent the fruit tree from aging in advance and update the reunion in time.

3. The proportion of branches composition.Different tree species and age requirements have corresponding and appropriate proportion of branches in order to enable the operation, distribution and consumption, accumulation of nutrients in the age of the year growth cycle, and coordinate according to the normal growth and reproductive rhythm.

4. Pruning can also balance the growth potential between group plants and the main branches on a plant, so as to achieve a balanced output and facilitate management.In addition, trimming is also a means to coordinate the growth of the ground with the root system.

3. How to use Gardening pruning and pruning correctly

When using Gardening and pruning, the correct holding method should be: the right hand of the right hand is upward, the four fingers are separated from the thumb, hold the handle of the scissors, the scissors of the scissors are upward, and the blade is to the right.When trimming the branches, the left hand should be closely cooperated with the right hand. While holding the right hand, the left hand is pushed to the right side of the branches to the right. With the principle of leverage, you can easily cut the branches.In this way, trimming fruit trees can not be trimmed continuously on the one hand, and on the other hand, the slippery wound is easy to heal. In addition, the fruit tree scissors are not easy to damage.

1. Garden Tool

Gardening tools are the maintenance equipment of human greening landscapes. It is a mechanized Tool for maintaining lawn, hedge, flower and grass, and trees as the target, replacing most manual labor.According to the use of use, Gardening tools include Gardening tools and Gardening tools.Classified according to the use object, it can also be divided into home tools and professional tools.

Gardening tools include garden scissors, flower tools (garden gear, small sets of leisure).

The main products of garden scissors include high branches, fence shears (fence cuts), branches and cuts (branches cut, pruning), cutting, cutting, cutting flowers, cutting grass, etc.flowers, small sets of leisure) include flowers, shovels, rake rakes, flowers, pork forks, etc.Rare, rakes, hoe, big shovel, small flower shovel, small flower shovel, three -character spatula, one -word fork, hexagonal flower rake, etc. Detailed & gt; & gt;

Second, garden machinery and equipment

1. oil saw

It is a garden machine that is used to mix trees. Because many trees have a lot of vines, sometimes other ground vegetation in the garden cannot be exposed to sufficient sunlight. At the same timeTherefore, in order to reduce the excess branches, the oil saw came in handy. Generally, the oil saw of the short -to -board board was used as a intermittent branches trimming. Detailed & gt; & gt;

2. Cutting machine

Presumably the grass -cutting machine is the type of garden equipment that everyone is most familiar with, because we often see Gardening workers to trim the lawn with a straw machine. In fact, the existence of large -scale gardens can not only make the environment better, but also a beautified environmentThe role of the grass is just the responsibility of garden beautification, so it can be called a "beautification engineer" in the process of garden greening. Detailed & gt; & gt;

3, hedgery machine

It is a garden machinery specializing in vegetation. The main pruning targets are trees and plants such as yang and winter green.According to the different shapes of the plant pruning, the hedgery machine is divided into double toughness and single toughness, and the single tough hedgery machine is mainly trimmed on wall -shaped hedges.The hedge is actually the hand of the hedge machine. It is really an artist in garden machinery. Detailed & gt; & gt;

4. Civil excavator

When it comes to excavators, the first thing everyone thinks of is the application in construction and construction projects. In fact, its use is very wide. For example, in the field of garden greening, excavators are ideal equipment used to dig pits to transport soil to plant trees and plant trees.For example, everyone knows that in the garden, the amount of trees is very large. If the workers are digging the pit alone, not only the work efficiency is low, but also very tired, but now the excavator is different.The original workload can be completed within one hour, so the excavator has also become the most powerful helper in the process of garden greening.

5. Cutting machine

People who are unfamiliar with garden greening may not know. In fact, garden greening is also divided into two types of soft landscape greening and hard scene greening. soft -scented greening is the planting and trimming of trees and flowers that we are familiar with.In terms of hard scene greening, the cutting machine is often used as a cutting Tool for various facilities. Its existence not only simplifies the hard scene greening project, but also greatly improves the efficiency of hard scene greening. Garden Machinery Equipment & GT; & GT;

three, What are the green pruning tools

1 Hand saw

The hand saw is a green plant trimming Tool such as flowers, seedlings, fruit trees, garden trees, etc., generally sawing blade length: 180-350 Millimeter.The chainsaw, also known as "power saw", is a cutting Tool used to cut wood, stone, steel, etc.Aiming at the trimming of fruit trees, early results, extend the economic life.

2 Pruning

There are different types of branches and cuts, with high branches and cuts, branches, and knife types.The preparation of the pole is mostly glass fiber fiber rod and hardcore. The length is: 3 rice, 3.5 rice, 4 rice, 5 rice.However, the quality of simple high -branch shear products is poor in quality and common faults.