What is a Wall lamp

Washing wall lamps, as the name suggests, let the Lights wash the wall like water, mainly used for building decoration and lighting, as well as outlines for outline large buildings. Becauseled It has the characteristics of energy saving, high light efficiency, rich color, long life, etc. Therefore, other light sources with wall lamps are gradually being led Washing lamp instead, led The technical parameters and the technical parameters of the Wall lamp lamp lamp led The lamps are generally similar.

The manufacturing step of the Wall lamp lamp

1. First apply a bit of heat -conducting glue on the intact aluminum -based plate, which can help the wall washing the heat sink to dissipate heat, and then put the lamp beads on the ground welded one by one.

2. Put the shell of the wall washed on the welded lamp bead and seal the two grooves next to it.It is convenient for gels when it is filled with glue

3. Those who need to irrigate are the easier -drying silicone (white gel or vinyl) that is easy to dry into the Wall lamp.

4. After these silica gels are dry, check the lamp beads carefully if these glue is covered.

5. Just cover the glass of the Wall lamp and put it on the head.Water washing lamp is made like this.(These lines must be connected in the head of the group before the group head)

6. The last link is aging packaging.

How to install the Wall lamp

1. Do the work before installation according to the position placed by the power supply;

2. Fix the lamps with screws firmly;

3. Connect the lamp with the power cord firmly, and wrap the waterproof tape without the wire head;

4. When installing the wiring, a branch power supply is connected to a maximum of 8-10 wall lamps; or after 50 meters, connect another power cord.

5. After the installation is completed, please check the installation line to confirm that the installation is correct. After no electrical short circuit, the corresponding control power supply is connected;

6. If there is a problem in installation, please consult our technical personnel.Or log in to the Website of lighting Enterprise lighting directly

How to install the LED light zone

In fact, the installation and use of the LED Light belt are very convenient, and you can make a very beautiful effect by yourself.Let me talk about the main installation and use of the LED light band.

1. Interior installation: When the LED Light belt is used for indoor decoration, it is very simple to install because it does not need to be hit with wind and rain.Taking the brand's LED light zone as an example, the self -viscosity 3M double -sided glue is affixed behind the LED lamp Belt. You can directly remove the sticker on the surface of the 3M double -sided glue surface during installation, and then fix the light bar on the need for installation.Local, just press flat with your hands.What should I do if some places need to be turned or grow?It is very simple. The LED Light belt is a circuit structure composed of 3 LEDs as a series of co -connected methods. Each LED can be cut and used separately.

2. Outdoor installation: LED lamp band Outdoor installation will withstand the wind and rain. If it is fixed with 3M glue, it will cause 3M adhesive to reduce the LED Light belt off.The method of cutting and connection is required. The method is the same as the indoor installation. It only needs to be equipped with waterproofing to consolidate the waterproof effect of the connection point.

3. Pay attention to the connection distance of the LED Light belt: Generally speaking, the 3528 series LED Light belt, its connection distance is up to 20 meters, the 5050 series LED Light belt, the longest connection distance is 15 meters.If this connection distance is exceeded, the LED Light belt is easy to heat, and it will affect the service life of the LED light zone during use.Therefore, when installing, be sure to install it according to the requirements of the manufacturer, and avoid letting LED lights run over the load.

Whether the LED Light belt is installed and used is very simple.However, there is still a friendly reminder: when installing the Light belt, you must pay attention to the safety of the electricity, and you can do it when the power is disconnected.

LED Light belt installation illustration

Step of lamp band installation method

1. Perform the corresponding length tailoring.Generally, the Lights we buy directly are good. This is that we need to cut correlation length according to the actual use of our actual use. When tailoring, pay attention to cutting according to the termination point.

2. After the length of the lamp Belt is carried out, we insert the thread needle of the lamp band into the place where there is no patch at one end of the lamp.

3. Connect the thread needle with the plug of the lamp Belt. At this time, you can power on the plug, but at this time, we need to pay attention to the situation that we need to check the access point again before inserting. There must be no water stains.

4. After plugging in, if the light band is shining normally, on the one hand, it shows that our installation steps are correct, and on the other hand, it also shows that there is no problem with the lamp Belt itself.

precautions for installation of LED light

1. When the entire roll lamp strap is not disassembled away from the packaging or piled into a ball, do not light up to light up the LED light band.

2. When cutting the lamp Belt according to the on -site installation length, you can only cut the light band at the printed scissors mark, otherwise one of the units will not be bright, and the length of each unit is 1.5-2 meters.

3. When connecting the power supply or two -section Lights, first bent the head of the lamp to the left and right, so that the wire in the lamp Belt is about 2-3mm.Take it to avoid short circuits.

4. Only the same specifications and the same voltage of the color lamp band can connect each other, and the total length of the connection cannot exceed the maximum permitted length.

5. When the lamp band is connected in series, each connection is connected, that is, the pilot is on, so that the positive and negative electrodes can be inconsistent with the light of the light of each lamp band in time.

6. The end of the lamp Belt must be put on the PVC tail. After tightening with a strap, then seal the interface with a neutral glass glue to ensure safety.

7. Because the LED has one -way conductivity, if the power cord with a passing DC converter is used, the power supply can be performed first after completing the power supply connection to determine the positive and negative pole connection before putting it into use.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

lighting installation has tips for inventory lamp installation, regrettable

PART1: lighting installation tips are important to plan

Although the lamps are small, the installation is absolutely particular. The primary task of the installation of the lamp is planning. Which lamps are necessary and which lamps are placed and which are placed.

1. Avoid using chandeliers

Don't buy too complicated chandeliers. The price / performance ratio is very bad. How ugly you will be dirty in the future.

2. Do not use the light source Background wall light source

The ceiling Background wall auxiliary light source should not be used to use the lamp band, and the small fluorescent lamp Tube is bright enough and replaced with repair.

3. The interval between the lamps should be reasonable

The reasonable lamp interval not only makes the light source of the space reasonable, but also makes the owner feel comfortable visually.

Part2: Selecting the selection of materials, pay attention to the type of lamps carefully

Lantern regrets often occur when buying Building Materials. To choose Building Materials, consider which type of selection, and where is the installation of each lamp.

1. Don't buy a spotlight

When designing the home improvement design, the lamp is resolutely canceled the lamp.

2. The switching lamp is best bought nearby

The switch and lamps are best bought nearby, because during the installation process, it may be found that such problems may be found after dismantling. You need to change or make up.In the later period, the enthusiasm for the beginning of the decoration has been exhausted and struggling.

3. Use brand -name energy -saving Lights

It is recommended to use a brand -name energy -saving Light bulb and buy it at the big supermarket. Do not touch your hand in the decorative city.Investment benefits for a lifetime.

Part3: lighting installation and lectures are different in different spaces

The installation process of the lamp affects later use, and the methods and precautions of different space installation are different.

1. The kitchen light should be bright

The kitchen Lights should be turned on. It is best to install a light above the pool or cut vegetables. The kitchen ceiling is dark, and the dim matte light is added. Alas, the kitchen lighting type is the same!

2. The aisle lamp socket

Leave a socket in the aisle to insert the night light (the old man does not have to worry about hitting the furniture at night)

3. Instal a transformer for small spotlights

The small spotlight must be a transformer. Do not be lazy by the workers. There are no transformers. Those Lights are like small bombs that will explode at any time. The final result is never to open (it is useless to change the Lights)!

1. What is the lighting light?

Detective lamp is a lamp for lighting. It belongs to special lamps. It has a powerful light source and a concave mirror that can be projected in a specific direction. It can use a reflector or lens to make the beams concentrate in a small three -dimensional corner.(Generally less than 2 ), so as to get a big light.

Second, the light source of the probe lamp

Detective lighting sources usually use LED light sources. LED probe Lights have high light effects, long service life, explosion -proof functions, and can also convert the strength of the working light at will.The place where you can move the lighting.

3. What are the use of probe Lights

As a special lamp, the invention of the probe lamp was originally used in military. Later, it was gradually used in the civilian field. The role of the visiting Lights was mainly long -distance lighting. Its use was divided into two aspects: military and civilian aspects:

1. military use

It can be used for air defense, the target of air weapons, night patrols, night air strikes against the enemy, interference of optical bombs, etc. In addition, the probe Lights are also used on tanks and airplanes for lighting.military probe Lights are a kind of weapon, which is much more complicated than civil probe Lights. The technical content and cost are much higher.

2. Civil use

Large -scale industrial and mining enterprises and construction site construction, transportation accidents, investigation cases and fingerprint photography.

1. How big is the power of the probe lamp?

At the beginning of the detection lamp, it was a special lamps for military use. It was used for long -distance lighting and searching for enemies, and assisting the night war. With the development of electronic surveillance equipment technology, the military use of the detection Lights has gradually decreased.How much watt is the probe light?

There are many types of probe lamps, and different types of detection Lights have certain differences. For example, home -based exploration Lights are relatively small, generally about one or two hundred watts;, 500W, 1000W; The power of the pyrine detection Lights developed and designed for the field of Outdoor security monitoring is usually 1000W; there are some special use of high-power detection Lights, which are about 2kW-5KW.

The greater the power of the probe light, the greater the brightness of it, the farther the range, and the more expensive the price. When choosing, you can choose the appropriate power of the detection light according to actual needs.

2. Introduction to the main parameters of high -power search Lights

Ultra -power detection Lights are professional Outdoor special lighting equipment. Usually use high -pressure short arc lighting sources, which are large. They are widely used in prisons, docks, hydrological stations, oil fields, airfields, large construction venues, industrial and mining enterprises, field search and rescue, etc.Place, the following introduces the parameters of high -power exploration Lights:

Rated power: 1000W

Rated voltage: AC220V AC50-60Hz

bulb: High -pressure short arc lamp 1000W

Life of the bulb: 1000 hours (after 800 hours of light failure starts)

color temperature: 6000K

Light flux: 32000LM

Valid range: 850m-1100M

Rotating angle: level 0-355 , vertical positive and negative 60 degrees

Rotating speed: level 9 degrees per second, vertical 1 degree per second

Rotating limit: external limit column

Available heat dissipation method: forced wind and cold

Protection level: IP54

Weight: 10kg

Dimensions: 380mm*250mm*580mm