1. How long can the Inflatable sofa take?

The use of inflatable sofas is very convenient, but as an inflatable product, its service life may not be particularly long, so how long can the Inflatable sofa be used?

The service life of the Inflatable sofa is related to its user, the environment, material, and workmanship quality. Generally speaking, if the quality of the Inflatable sofa is better, the user's weight is less than 200 pounds, and the frequency of use is moderate, maintenance and maintenance, maintenance and maintenancePolyly, the service life of the Inflatable sofa may reach more than one year.If the user weighs more than 200 catties or the quality of the Inflatable sofa itself is poor, the service life of the Inflatable sofa may be shortened to about half a year.

2. How to maintain an Inflatable sofa chair

The service life of the Inflatable sofa chair is affected by many factors. Pay attention to the maintenance of maintenance, you can use the maintenance of the maintenance sofa for a long time.

1. The sofa mat should be dry regularly to prevent moisture or mildew.

2. When putting the cushion, press the cushion on the four sides of the cushion to slowly go in, do not suddenly and violently press it.

3. Don't stand on the Inflatable sofa, or sit on the armrest or back.

4. Don't let your Inflatable sofa go close to high temperature or explode in the sun.

5. Don't let your little pet grab or climb up with an Inflatable sofa with claws.

6. clean and Inflatable sofa with a soft brush head or vacuum cleaner on a regular basis, which can extend its service life and make regular cleaning and maintenance easier.

7. The inflatable amount of Inflatable sofa should not be too high or too low. Generally, it can be about 80 % ~ 90 %. It can be charged in winter, and some gas should be appropriately put in summer to maintain its best state.

1. What should I do if the ceramic Flower pot is always rotten?

The ceramic Flower pot comes with glaze, which is very poorly breathable and permeable. The ceramic Flower pot is large and deep. It needs to be installed with a large amount of soil.The soil will become tighter and tighter, and in the end it becomes impermeable, and it is very easy to accumulate water, so it is easy to use ceramic basin to raise flowers.If the flower friends have to use ceramic pots to raise flowers, they need to master some maintenance skills in order to raise flowers.

Method 1:

1. First prepare the stone -sized stones, cover the porcelain basin bottom, and then lay a plastic gauze net on the stone. Another layer of coarse sand is spread on the gauze network. The thickness of the rough sand is about 2cm.

2. Prepare a white iron or hard cardboard. The width is slightly longer than the perimeter of the Flower pot, and the height is slightly higher than the Flower pot.Then surround a cylinder with a diameter of 2cm smaller than the Flower pot and put it in the porcelain basin.

3. In the middle of the cylindrical and porcelain pots, fill the coarse sand, then put the pot soil inside the cylinder, gently compact the pot soil and slowly pull out the cylinder.

4. Pour water once. At this time, the pot soil will be in contact with coarse sand. The bottom and surrounding rough sand layers of the Flower pot will become a channel for breathability and permeability of the plant.

Method two:

You can spread a layer of ceramic grains at the bottom of the ceramic Flower pot. The grains of the cushion are at least one -third of the depth of the ceramic Flower pot, which can ensure the breathability of the pot soil.It should be noted that you must not pad stones. The main ingredient of the stone is calcium carbonate, which will affect plant growth.

Method three:

The soil used in ceramic Flower pots is best to be loose and breathable, light soil, and ceramic Flower pots are not breathable, so you need to choose some soil with strong breathability, which is more conducive to breathing in the pot soil. Naturally, it is naturally natural. Naturally, it naturally.Its roots will also grow better.

Method 4:

The bottom of the ceramic Flower pot is best matched with a cushion to breathe the bottom. There is only one small hole at the bottom of the ceramic basin, which is completely impermeable, especially after the Flower pot is directly contacted with the ground, there is no breathable space, so you can choose the mat in the mat., A breathability will be stronger.

Method 5:

In the end, there is a trick, which is the maintenance of the pot, which is to put the ceramic Flower pot outside the plastic Flower pot. This will not affect the beauty nor the effective breathing of the plant.

2. precautions for Ceramic Pot to raise flowers

Pay attention to the ceramic flowerpot when raising the ceramic pot, and the drainage and breathability are not good. Therefore, do not produce water during watering, otherwise it is not conducive to the growth of flowers.In addition, good air circulation must be guaranteed, which is also helpful for water evaporation and plants.

1. Cultivation of Jeraldon wax flowers

1. Jeraldona grows best at 15-35 C, and the area growing the most during the same period of rain and heat.It can withstand a low temperature of minus 3 degrees at a high temperature of more than 40 degrees, but it cannot tolerate the frost. The frost causes the flowers and flower buds to freeze, which affects the quality of the flower. The frost may also cause the seedlings to die.

2. The Jeraldon dharma season likes a warm and humid environment.Like sufficient light, full light or semi -light.

3. Adapting to the land environment with good drying and ventilation, if the plain land should be required to choose sandy soil land with low groundwater Levels and good drainage, it should be planted to endure the dryness of the plant after living.Especially in the rainy season, the root system should be prevented from rotting.When cultivating the seedlings in the seedlings, the Nutritional soil should be prepared: 1/3 0.3%of the potassium dihydrogen phosphate polymaphide is adopted by the field soil.Among them, the latter two are dissolved and entered by spraying. Generally speaking, as long as the transplanting period is transplanted, the survival rate will be very high.

4. After the Jeraldon waxy is purchased by the naked root seedlings when the seedlings are transplanted, they must be placed in a nutritional bowl as soon as possible. It is necessary to place it in the plastic film that is built for about 10 days.There must be a Shading net to control the light.In the small shed to maintain the water of the leaf surface, prevent the leaves from being degraded.Use artificial or automatic spray to replenish air humidity around noon every day.

5. Geraldon's dhahua has few demand for Fertilizer.For most varieties, appropriate nitrogen fertilizer can increase the length of the branches, reduce yellow leaves and abnormal leaves, increase the output of product branches, and extend the life of the bottle.There is no significant impact on the various traits of gold plums.

Second, the trimming and setting of Jeraldon wax flowers

1. The seedlings of Jeraldon's wax flowers do not need to be specially trimmed.For mature plants, trimming is carried out in combination with harvesting.

2. The first trimming is often after its first flowering.If the flower branches that bloom for the first time are short, they can still not be trimmed. If the flower branches are longer, the first trim can be carried out in combination with flowers, but the amount of chopped branches and leaves should be less than 1/2-2/3 of the total amount of leaves. When cutting flowers, you should choose branches with full flowers, yellow leaves and pests, and 20-70%of the flowers.

3. The harvest should be carried out when the temperature is low in the morning. After harvesting, place it in the silver sulfate solution as soon as possible for cushioning to avoid contact with ethylene substances and place them in a 0-2 C environment to be packed in graded.The packaging is used for bandaging. When bandaging, the top tips of the branches are neat. The rubber band at the base should be tightly around a few times, and the branches and leaves on the upper part of the branch should be kept loose.Before packing, the entire bouquet should be immersed in a mixture containing bactericides and paradimetal pesticides. After air -dried air -dried, packets and packing (the best use of a foam box, a few ice cubes should be placed in high temperature in summer.), Immediately Ship or place it at a condition of about 3 C after the packing.

Third, the disease prevention and control of Jeraldon wax flowers

In a more humid climate, the root and rhizome -necked diseases caused by sickle bacteria, soil -deductible bacteria such as fogy and mildew may cause the plant to be harmful.It is important to choose strong seedlings, not to pay attention to water, and to choose soil with good drainage.Gray mold is a disease that often occurs on the petals and leaves that often occur in the wet environment. It can be controlled by spraying in the fields or soaking in the treatment of a sterilized agent such as pushing Hyin.

1. What is the material of the mesh suspension

There are many Hammock materials. The most common ones are fabric materials, such as canvas, parachute cloth, etc. Some are also a mesh suspension. So what is the material of the mesh suspension?

The mesh suspension is also called the nylon Hammock. It is made of nylon mesh. nylon net is a chemical fiber woven net with chemical fibers such as nylon wire, nylon wire, polyester silk, and Narun silk.Formed, it has the characteristics of high toughness, good elasticity, corrosion resistance, oil resistance, water resistance, wear resistance, high temperature resistance, weather resistance and other characteristics. In addition to making suspension, it is also widely used in industrial filtration, oil, chemical, printing and other fields.

Second, the suspension mesh is good or good canvas

The mesh suspension and canvas hammocks are suspension of two different material fabrics. In addition to the differences in material, the two are also different in terms of experience and comfort. So which one is the best mesh suspension and canvas suspender?

1. canvas suspension is a fabric of traditional manufacturing suspension. Its biggest advantage is softness and comfort, large bearing gravity, easy to clean, and it is more comfortable to lie down. The disadvantage is that the moisture resistance is poor and the breathability is worse.

2. The advantage of mesh suspension is that the breathability is very good and the heat dissipation performance is better. The disadvantage is that the comfort of lying on the lay down is average, and if a friend with a relatively large weight is lying up, it is easy to have a trace, and the public occasion will be a bit embarrassing.

Generally speaking, the canvas hammocks and mesh suspension have their own advantages and disadvantages. Generally, it is better to use a mesh suspension by the seaside, the lakeside, the poolside and the weather.Essence

[How to choose a barbecue rack] How to clean the barbecue rack with a barbecue rack

How to choose a barbecue rack

barbecue rack is an indispensable kind of barbecue Tool when making barbecue foods. In the process of making barbecue foods, barbecue racks will be in contact with barbecue food at any time. Therefore, the cleaning and maintenance of barbecue racks is very important.When home, it not only causes pollution of barbecue foods, but also affects the color effect of barbecue food.Based on the more than ten years of barbecue experience in Xingxin Food Square, we put forward some suggestions for cleaning and maintenance for barbecue.

The cleaning and maintenance of barbecue racks should always run through the entire barbecue process. First of all, when purchasing barbecue racks, pay attention to the type, material, process and characteristics of the barbecue rack.

barbecue racks can be divided into: round plane barbecue racks, round concave barbecue racks, Square plane barbecue racks, Square concave surface barbecue racks.

There are generally two types of barbecue racks: stainless steel and iron.If it is used as a mesh base, the surface treatment can be galvanized and chrome -plated, the surface is Smooth, and the structure is reasonable.

The process of barbecue racks is divided into partitioned flowers, woven, and arc welding. It is mainly made of stainless steel wire welding. The surface is polished and welded.wait.

The characteristics of barbecue racks are economically affordable, high temperature resistance, non -deformation, no rust, non -toxic and tasteless, environmentally friendly and hygienic, and convenient use.Easy installation and beautiful appearance.At present, the barbecue racks for many barbecue restaurants are basically chrome -plated barbecue racks. They are safe and hygienic, convenient, lightweight, novel in shape, fine -grained, sophisticated materials, luxurious and generous, durable and durable.

How to clean the barbecue rack

In the process of barbecue food, the barbecue rack is contacted with barbecue food, and there is fire burning. Oil or carbon dirt is the main source of pollution of barbecue racks. Before the barbecue food is carried out, the first step is to wipe the barbecue rack and beforeBarbecue food.

The second point is that after each grilled food is baked, it must be cleaned once, thoroughly cleaned the oil and carbon dirt, and then baked the next food.The third point is that after all the barbecue work was over that day, a thorough cleaning work was done to ensure that the barbecue work the next day was carried out normally.

The fourth point, you can use the oil -removing cleaner to be sprayed directly when the oil -removing cleaner is used to be used. After waiting for a few minutes, you can easily remove the oil with a wet cloth or paper towel.Or use vinegar to soak it, and then brush it with a steel wire. The more commonly used method is to wipe it with a wire ball.

The cleaning and maintenance of the barbecue rack is ready, and it will be handy when it operates. Diners can eat nutritious and assured barbecue foods. If you can make first -class characteristic barbecue foods, then barbecue operators make money without worry.