What are the varieties of bamboo bonsai?

Luohan bamboo (Buddha bamboo), Golden Jade bamboo, Zizhu, Phoenix bamboo, Golden bamboo, these are very beautiful real bamboo varieties.It is not bamboo, but it is called bamboo, brown bamboo (Guanyin bamboo), rich bamboo, lily bamboo, etc.

bonsai bonsai planting

1. Watering

The management of bamboo bonsai should pay special attention to the supply of water. When the growth period of growth or high temperature in summer, watering and spraying water are diligent.Phenomenon.

2. Fertilization

(1) It should be used for acid or neutral soil when planting bamboo. It is best to contain some sandy quality in the soil. The farmland soil is also available. When it is planted into the pot, you can put the some Organic fertilizer.

(2) Potted bamboo likes water, so you can measure it slightly when fertilizing and watering, so that they can grow better.

(3) The fertilization time of potted bamboo can be determined once a month. This speed is relatively best for bamboo.

3. Pruning

bamboo can be printed on bamboo from June-July, pruning leaves and branches that are too dense or affect the overall shape.For bonsai that requires special shapes, the side branches of the side should be trimmed to help the new branches germinate; the new bamboo shoots should be removed in time.

4, turn the pot

bamboo categories are touched every 2 to 3 years.When turning the pot, pay attention to protect the roots of the whip roots, and use fertile and loose culture soil.After turning the basin, put it in the shade, and keep the pot soil moist, and spray the leaves of the leaves to prevent the leaves from shrinking.

5. Prevention and treatment of pests and insect pests

There are fewer pests in bamboo potted pests, mainly bamboo crickets, scale insects, aphids, etc., which can be sprayed with 800 times liquid liquid or 1000 to 1200 times with duves of enemy cachines.

Pay attention to planting bamboo at home

1. Is the bamboo bonsai setting home?

There are many morals of bamboo, and the meaning of different bamboo symbols is also different. For example, the yellow bamboo symbolizes the wealth of wealth, and the money is worry -free.The Buddha belly bamboo symbolizes the generosity and can accommodate the world's inconsistent things.Xiaoye Longzhu symbolizes his career.

2. Where is the good place at home?

(1) Stairs mouth

The position of bamboo in the stairwell will have the effect of enhancing Feng Shui, which can improve the family transport. It can also remove the evil spirits at the door and bring good luck to the home.

(2)

bamboo hangs at the door. Because the door is an inlet, the air here is more suitable for the growth of bamboo, and it is also conducive to the wealth in the prosperous family.

(3) Ming Finance

The position of the Ming financial position is the position of the diagonal line on the left or right side of the door of the house. This position is "symbolic financial position". You can place some mascots in this position.Putting on this position can make it better, and it will bring a steady stream of good luck and wealth.

1. What is the structure of electric scissors

Electric scissors are used as the power of the motor, and the handheld electric Tool that drives the work head through the transmission mechanism to drive the cut operation. The specific part is composed of the following parts:

1. battery: Most of the electric scissors are lithium batteries. They have large capacity and light quality. They are usually equipped with 1.5m long power cords, chargers and backpacks. The power cord cannot be cut off.There is also a battery with electric scissors on the handle, which is usually small.

2. blade: There are two types of dynamic blades and fixed blade. The quality of the blade is directly related to the pruning effect and pruning efficiency. Pay attention to the material, workmanship, and service life of the blade.

3. Body head: Not all electric scissors have a knife head. Generally, 3 cm electric cutting has a knife head, and 4 cm electric scissors have no knife head.

4. Extend rod: It can be used to trim higher branches and leaves. The length of the lengthened rod is generally 1.3-1.9 meters.

5. Others: Including lubricating oil, rubber skid cover, etc. These tools can make electric scissors more convenient and smoother.

2. What is the working principle of electric scissors

Electric scissors take electricity as the source. When working, the controller switch starts and starts with a brushless motor. Drives the eccentric axis-connecting mechanism through the reduction box, so that the knife rod is driven by the head of the knife head.Do not move on the blade to complete the pruning of the branches.

3. How to use electric branches and scissors

Electric pruning trimming is used for cutting and trimming and trimming, and trimming, picking, etc. of fruit branches below 30mm. The use of simple and convenient use, good pruning quality, and the use of electric pruning trimming is:

1. Open the special Backpack and put the electric pruning and battery in the corresponding storage package.

2. Put the electric branches and pruning and connect the power supply through the Backpack and connect to the battery, and wear a Backpack (put the scissors power cord into the specified fixed buckle of the strap to prevent it from cutting to the wire)

3. Take out the electric branches and trimming, turn on the battery power switch, and will make a "drop" sound, which represents the normal power supply of the battery.

4. Continuously and quickly deduct the trigger 2 to 3 times, and the blade will be opened automatically.

5. Before work, pull the trigger to make the blade aircraft run several times. Listen to whether there is no sound or too fast and too slow, and start working after normal.

6. The opening size of the blade: Press the trigger, and when you hear the two "Didi" sounds, the trigger will be released immediately, and the size of the blade will automatically convert.

7. After the trim is trimmed, long press the trigger, hear the three sounds of "Didi", release the trigger, automatically close the blade, and then turn off the battery power switch to collect it.

Note: During the long -term use of the machine, the grip heat is normal; the blade of the scissors needs to be maintained regularly. When the branches are completed or needed to replace the blade, the blade is opened to add lubricating oil between the blade.

1. Common faults and maintenance of Solar street lights

With the gradual adjustment of my country's energy structure, Solar resources are widely used. Solar street lights are street lights using Solar lighting. During use, there may be some faults. The following is a common failure and maintenance method for Solar street lights:

1. The whole light is not bright

Solar street lights are Outdoor lighting. They often encounter high temperature or rainy conditions, low temperature or rainy weather, etc. The controller of Solar street lights is usually insidePhenomenon.First check whether the wiring site of the controller has water traces or rust. If so, it is likely that the controller has been damaged. If there is no battery voltage measurement, such as 12V Solar street light power supply system, the battery voltage is lower than 10.8V, the battery has been storage.No electricity, you need to replace it.Check if there is voltage and current output under normal working conditions.If there is no, the batteries are damaged and replace the batteries.There is no problem in the above, you should check the light source. Only the light source is connected to the power supply. See if it Lights up, the light source is replaced without light.

2. The lamp head flickered

The cause of this failure is poor, the battery is lost in power, the battery is lost, and the amount of power storage has been severely reduced. If the line is fine, the battery is replaced.

3. Short lighting time

Generally, it is caused by rainy days without the sun. If the rainy day durates short, it is usually caused by the decline in battery storage power and insufficient power storage capacity.

4. The source of Solar street lights is not bright

Many Solar street lights use dot matrix LED light sources. Except for the quality problem of LED light sources, some lamp beads will cause this situation.The solution is to replace the corresponding lamp beads, welded firmly or replaced the entire street lamp head.

Second, the Solar street light is broken

Solar street lights are working outdoors. Even if the quality is good, it will inevitably fail. So who should I find if it is found that the Solar street light is broken?

Generally speaking, the Solar street lights are broken, depending on where the Solar street lights are installed:

1. If the Solar street lights on the municipal road are broken, you can contact the local municipal street light management department to let the street light management department go to repair.Essence

2. If the Solar street lights in the community are broken, you can contact the property department to let the property be repaired.

3. If the Solar street lights of the scenic area or Park are broken, they can generally report to the staff center or Park management office to report to the staff, and they will send people to repair it.

4. If the Solar street lights in rural areas are broken, as long as you buy Solar street lights produced by regular manufacturers, contact the manufacturer. The manufacturer will send professionals to contact the person in charge of the village.If the user cannot solve it, they will send professional and technical personnel to help solve the situation where the street lights are not turned on.

1. How to install the balcony anticorrosive wooden Flower stand

Although anticorrosive wood, anti -mildew, mildew, moisture -proof, insect -proof and other properties are prominent, and they have better durability.However, due to the special environment, if you pay attention to the correct installation method, it will greatly extend its service life.

1. Pay attention to leaving an extension joint when installing

When installing anticorrosive wooden Flower stand, the gap between 0.2 to 1cm of anticorrosive wooden Flower stand is generally determined by the water content of wood. When the water content of wood exceeds 30%, it should not exceed 0.8cm.The expansion of anticorrosive wood.In addition, anti -corrosion columns with a thickness of more than 50mm or more than 90mm can be opened on the back.

2. Select the hardware connection that is not easy to rust

The hardware is made of stainless steel, hot -dip galvanized or copper, which mainly avoids rust corrosion in the future and affects the connection fastness.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

3. It is best to paint protective coatings after installation

The damaged part of the anticorrosive wood processing should be painted with preservatives and Outdoor protective coatings.Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laying of the wood, and then the sand is light. If you want to have a better effect, you can also apply Outdoor protective coatings after cleaning the surface.

4. Pay attention to the protection of finished products

After painting the external protective coatings or oil -based coatings of anticorrosive wooden Flower stand, in order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective membrane formed by the anti -anticorrosive wooden Flower rack surface layer.If you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.

2. How to maintain the balcony anticorrosive wooden Flower stand

1. First of all, the anti -corruption wooden Flower stand should be laid in a suitable place. The unevenness of the terrain will affect its original structure. It can be solved by pads.

2. The Flower stand that receives rain outdoors will inevitably be continuously attacked, so it is regularly dried on the wood, so that the water that can enter the internal entry can be evaporated to avoid being destroyed in the internal structure.

3. Repair the damaged part, because if it is not repaired, it destroys the anticorrosive layer, then the rust and the internal damage of the metal accessories are possible.So a certain time must be corrected and checked.

4. Large -scale correction is necessary. It can be positioned once a year for paint or waxing.After a correction, the Flower stand is basically scrapped after waiting to be aging.

1. Where is the cat sand basin better?

1. Cat sand pot can be placedbathroomIs it?

cat sand pots can be placed in the toilet, and the toilet generally has rowing fans to disperse.The cat litter that is scattered can also be washed away directly with water. When the owner goes to the toilet, he can directly observe the cat's excretion.

2. Can it be placed next to the rice bowl and waterover?

Not recommended.Cats are animals that pay attention to hygiene, and they generally refuse to excrete in the place where they eat.

3. Can the cat sand pot be placed on the balcony?

Yes, as long as the cat can find the cat litter basin skillfully.The balcony environment is relatively clean, which is more suitable for cat excretion.

Second, can the cat sand basin change the position of the cat?

It may not be used to it at first, and it will be good for a long time.Go to the catbathroomWhen she took her to the position of the cat sand pot, or put the cat's stool in the cat litter basin, in short, let the cat remember the smell, so that they can gradually find the place to go to the toilet.If a cat can't find a place to go to the toilet, you must educate patiently and must not be corporal punishment.If you hit a cat casually, you will have a sense of fear of the owner, and you will have a humble personality.Because the cat's body is much smaller than a person, it is likely to be injured if it is beaten.