1. How old is suitable for children's slides to play

8 months-1 years: At this time, the baby can play the very low slide in the room.But at this time, the baby cannot control his body balance. During the decline, parents must protect the children along the slider.

1-2 years old: Under the protection of parents, babies can play straight slides with smaller slopes, so that the baby can understand the rules of the topic.

2-3 years old: Try to make your baby slide small slides.During the process, you can guide your baby to control the speed of gliding by holding and loosening these two postures on both sides of the slide, and feel the balance and physical friction.

3-4 years old: You can let your baby try a large slide and rotating body.Consciously exercise your baby's physical coordination.In the case of safety, try to let your baby want to crawl from the slide, and exercise the child's limbs and hands and feet coordination on the Smooth bevel.

2. How to play children's slide

1. The help of the help of adults: When the baby can sit independently, parents can take the baby to play slide.Dad or mother hugs the baby on the slide, holding his hands down from top to the baby's armpit, saying, "Woo, the plane is flying." When the baby has played a few times, with experience, the father and mother only need to put the baby the baby.Put it on the slide, the mother squatted at the bottom of the slide, and the father stood beside the slide to watch the baby, let the baby slide down.

2. When the baby can shake and walk, the parents can bring the baby to play low and Smooth slides with the baby.Mom holds her hands under the armpit of the baby, helping the baby climb to the upper part of the slide, and encourages the baby to decline (Mom and Mom can't stand the baby hard, check whether the sides of the slide are Smooth and whether there are stains) before sliding).

3. Play the slide independently: When the baby can play tall slides, let the baby climb on the slide and slide down.

4. Play slide with your companions: Mom and Dad take your baby to the children's playground to play slide with your friends, guide your baby to actively interact with his companions, and cultivate the quality of the baby's modesty.You can also use encouragement language to induce your baby: "Baby, let the little brother play first, okay?" If the baby performs particularly well when playing with his companion, parents can give the baby appropriate encouragement.

3. What should children pay attention to when playing slide

1. Safe wearing when playing slide:Don't be too thin or too thick.Because the surface of many slides is not very Smooth, the clothes are too thin and they will scratch the baby.Too thick clothes will affect the convenience of action, and it is not safe during the climbing process.Do not wear ropes or hard objects, brooches, etc.Clothes with rope may be hooked on the railing on the way to play, causing the baby to suffocate.If you wear clothes like a hard button, you will be injured during the slide.As for the brooches, other needles, etc., let's not let the baby wear it on his body or drag it on his hands to play slide.

2. Parents are that the child is before playing slide. Parents should check whether the slide has a protruding edges or nails, and whether the bottom and armrests are broken at the bottom of the slide.Most importantly, do not wear loose or lace -up clothes for children, do not be a scarf to avoid accidents.

3. When going up the slide, you should step by step at the same time, hold the railings at the same time, climb to the top of the slide, do not climb up from the slide mouth; if the child is too small, the parents should support him.

4. Let the child sit down, your feet are down, your legs are opened, and your hands hold the slide to keep your upper body stand upright to facilitate speed control.(The big head is declining, the belly is lying down on the lower stomach, half squatting, and Running down. These four dangerous movements must not be done.)

5. If there are more children playing slides, come one by one. After a child slides down, the child above can start to slide, so as not to cause harm to cause damage. Finally, after sliding from the slideChildren make an empty position to avoid being trapped.

Profile

Turtle bamboo is a kind of perennial wooden vine climbing evergreen shrub. Al -alias Penglai banana, turtle back banana, and wire orchid are born in the forest and climbing trees.Stems are green, thick, Zhou Yan is ring -shaped, and the remaining petiole is green; the leaves are large, the outline is ovate, thick leather, bright surface, light green, green white on the back.The flames of the Buddha are thick, wide ovate, boat shape, near upright.The ears of the meat are near cylindrical and pale yellow.Storing flower silk linear.Pistol pyro -like, yellow, slightly raised.The berries are pale yellow, and the stigma is blue and purple spots.From August to September, the fruit matures after the flowering period.

Fujian, Guangdong, and Yunnan are cultivated in Luoyi, and Beijing, Hubei and other places are mostly planted in greenhouses.Native to Mexico, most of the tropical areas are cited for viewing.

Nickname

Penglai banana, iron silk orchids, hole Xilin taro, turtle back banana, wire orchid.

variety

1. Landal leaf turtle back bamboo

The oblique leaf turtle back bamboo is also known as the mini turtle back bamboo, which is a common type of turtle back bamboo.Its plants are small, slower, upright, and the leaf surface is green.It is often used as a small and small Hanging plant pot.The oblique leaf turtle is not very resistant to low temperature, and it is more like a humid and high temperature environment.

2. Multi -hole turtle back bamboo

The long -empty turtle is back, the leaves are green and the surface is Smooth, the leaves are long ovate, and the middle part to the edge of the leaves is oval or oval -shaped pores.Thin.

3. window -hole turtle back bamboo

The window hole turtle back bamboo, the leaf is long oval to the long ovate, compared with the multiple turtle back bamboo, the number of window holes is large, the outer edge of the window hole is closer to the leaf edge, the total area of the hole is larger, and the leaves are thinner.

4. Belly leaf turtle back bamboo

The spots of the turtle back bamboo are variants of the flower and leaves of the turtle.The leaves have large area of yellow and white lumps and spots, which are beautiful.

5. Long stem turtle back bamboo

The long stem turtle back bamboo is a variant of the turtle bamboo.The erectism is not as good as the turtle back, and the leaves are slightly smaller.

Suitable place

1. Put in the living room

Turtle bamboo is very good for Feng Shui in the living room, and approaching the blessing of wealth and continuous blessings.The oblique angle of the entry of the living room is generally the best Feng Shui financial position in the home. It is the best role in recruiting a wealthy town house from the perspective of Feng Shui survey.

2. Put in the study

The back of the turtle is mainly placed in the book, which will have career.However, remember that the turtle back bamboo cannot be placed on the desk, and it will affect the luck on the desk.Because the plant is relatively large and it is easy to fall, it is best to place it at the door of the study.If you want to help your children's academic and career, put a turtle back bamboo on the door of the study.

Effectiveness and role

View

The turtle -back bamboo leaf shape is strange and the hole is cracking, and it looks like a turtle back.The stem nodes are thick and like Luohan bamboo, dark brown gas root, and the vertical and horizontal intersect is like a wire.Its leaves are green and green, and the stems are thick. There are large crescent -shaped leaf marks in the festival. They have cable -shaped meat and root. They are extremely shade -resistant.

Purification

Turtle bamboo has the effect of absorbing carbon dioxide at night, which is very helpful for improving indoor air quality and improving oxygen content.It has the characteristics of priority adsorption of harmful gases such as formaldehyde, benzene, and tvoc. The absorption of formaldehyde back to a turtle bamboo is equivalent to the absorption of 10g coconut carbon. It achieves the effect of purifying indoor air and is an ideal indoor plant.

The leaf shape is strange, the hole is cracking, and it looks like a turtle back.The stem nodes are thick and like Luohan bamboo, dark brown gas root, and the vertical and horizontal intersect is like a wire.Its leaves are green and are extremely shadow -resistant. They are famous interior large potted leaves.

Edible value

The fruit taste is delicious, but it often has a hemp.After the fruit is mature, it can be used for cooking. It has sweetness, and the fragrance is like pineapple or banana.But pay attention to the immature fruits and not to eat, because it has strong irritation.Residents of origin called this fruit as "the beautiful fruit given by the fairy".

Breeding method

illumination

The back of the turtle is more shade -resistant, avoid scorching sun, likes to shoot light, and the sunlight will be burned. The color of the light too dark leaves will fade. In summer, the Flower pot can be placed in the north window, but the sun needs sufficient sunlight in winter.

Humidity/watering

The turtle -back bamboo is wet, the potting soil is kept dry without cracking, moisturizing but not wet. The air humidity is 60%. It should be sprayed and pour in the leaf surface every day in summer.Black spots appear or even black rot.

temperature

Turtle bamboo is warm and not cold -resistant. The suitable growth temperature is 15-25 C. When the temperature drops in winter to 5 C, it should be moved into the indoor warmth. The indoor temperature control can be safely overwinter between 15 and 20 C.

soil

Turtle bamboo is loose and well -drained soil. Put some hoofs and broken bones as base Fertilizers before the soil is placed.

Fertilize

The turtle back bamboo is a period of strong growth in April to September. Thin liquid Fertilizer is applied once every half a month. The growth period is 280 % or 370 % of nitrogen liquid Fertilizer once or so.Phosphorus and Potassium fertilizer make the stems stout and prevent falling.

Frequently problem handling

Breeding method

1. Sowing and breeding

Turtle-back bloom in summer. In order to improve the strong rate of seeds, artificial pollination is required. At 9-10 am and 3-4 pm at 3-4 pm, pollination is best, and pollination success is high.It takes 15 months to grant pollination to the seeds.Pay attention to ventilation and Fertilizer water management during the development of seed development to promote strongness.Put the seeds in 40 C for 10 hours before sowing. The sowing soil should be disinfected at high temperature.The turtle-back bamboo seeds are large and can be performed on demand. The room temperature is kept at 20-25 C after the broadcast. The plastic film is covered with the box.If the room temperature is too low during the sowing process, it will not only affect the emergence, but even water stain rotten.

2,Cuttance

Both stem cuttings can be used in spring and autumn, and the effect of cuttings is the best with spring from April-May and September to October in autumn.Because the temperature is suitable for the healing of the stem node, it is based on the living.Select the full stem tissue and grow strong side branches of the stem tissue. The cuttings are 20-25 cm in length. The leaves of the base are cut to keep the upper small leaves, cut the long roots of the long air, and retain the short gas root to absorb moisture, which is good for beneficialRoot.Put the mixed matrix of rough sand and peat or rotten leaf soil. After insertion, keep it 25-27 C and higher air humidity, and start taking root in about one month after insertion.After the cutting is rooted, the axillary buds on the stem knight also began to sprout the leaves. In order to accelerate the growth of the seedlings, the room temperature is kept above 10 C to strengthen the management of Fertilizer and water.If you need to suspend the embellishment, you can prepare wooden frames or iron shelf containers, packed palm Skin, put on fertile rotten soil, and planted it into a living turtle back bamboo as a suspension product.

3. Substitute breeding

In summer, the side branches of the large turtle beings are split throughout the section of the side branches of the Turtles, with some qi root, and directly planting in a wooden barrel or bowl.In 1980, Denmark used the top of the stems and thexillary buds of the turtle.The MS medium plus 10 mg/liter 6-liter 6-amino gonads and 2 mg/liters of cylinder, under 30 C, starting with wounded tissue and uncertain buds in 6 weeks.The buds are transferred to the mS medium with a triangle bottle of 2 mg/liter of percilline, and the root is induced at 4-6 weeks.

Prevention and treatment of pests and insect pests

1. Leaf spot disease

Common diseases for Turtles.Mainly harmful leaves.

Control method: Put in ventilation and bright places to promote ventilation and light and reduce the incidence.After the occurrence, it should be sprayed 600 times with 65%manganese -zinc wettable powder in time.For other prevention and control methods, see the prevention and control of the brown bamboo diseases.

2. Gray spots

Prevention method: Same leaf spots.

3. Sicatin insect

Frequent pests for Turtles.It is mainly to harm petiole and blades.

Control method:

Family maintenance can be gently removed with a toothbrush.

When there is a large amount, 40%oxidized carcass can be sprayed with 40%oxidized fruit emulsion.

The cause and treatment of yellow leaves

1. Soil issues

Reason: Turtle bamboo has a relatively developed meat root, so it has high requirements for the breathability of the soil. The more sticky soil will affect its breathing, which will cause its leaves to become yellow.

Solution: For the appropriate soil, you can use 2 copies of cooked loess, 1 part of honeycomb coal ash, and 1 mix of chicken manure into a mixed soil. This soil has a good breathability and can make it grow better.

2. Moisture problem

Reasons: Watering bamboo back bamboo should not be too much or too little. Both extreme watering methods will cause the leaves to yellow, and if there is a lot of water, it will cause rotten roots.

Solution: Watering on a regular amount, it is best to sprinkle water when the soil surface is dry, which can increase the humidity in the air.

3. Light problem

Reason: Too strong or too weak light will cause the leaves to yellow. Putting it in a cool environment for a long time will turn yellow, because it affects the photosynthetic effect.Of course, it cannot be placed in a place where light is too strong. It is easy to burn the leaves and cause yellowing.

Solution: When the sun is strong, you can cover it appropriately or let the astigmatism irradiation.

4. Temperature problem

Reason: The most suitable growth temperature of the turtle bamboo is 20-25 C, and the minimum temperature of the growth period cannot be lower than 10 C. Do not mature less than 5 C. If the temperature is too low, frostbite will cause the leaves to yellow.

Solution: When the temperature is too low, you can take some warmth measures appropriately. Be careful not to put it directly on the place where the air conditioner is directly blowing or the side of the heating.

precautions

1. During the growth of the turtle back, the plant grows rapidly and the cultivation space should be spacious, otherwise it will affect the stretching of stems and leaves, and it will not show the beauty of the leaf shape.

2. Turtle -back bamboo planting soil requires fertile and loose, water absorption, and good water retention. It is often best with rotten soil or peat soil.

3. The growth temperature of the turtle -back bamboo is 20-25 C, and the temperature of the seedlings at night in winter is not less than 10 C. The mature plants can resist 5 C for a short period of time, but frost damage is prone to occur.

4. Turtle back bamboo needs to be sprayed frequently in the summer to maintain high air humidity. The leaves are often cleaned to facilitate photosynthetic effects.

5. The juice of the Turtles is toxic, which has a stimulation and corrosion effect on the Skin.

What is the size of common beach chairs

1. The specifications of common beach chairs

It is mainly divided into 4 models, namely large, medium, small, special trumpets, with size from special trumpet to large numbers from 32*32*H56cm, 37*37*H62cm, 42*42*H68cm, 49*49*H75cm.

2. iron beach chair

iron beach chairs include two types of pure iron art and iron vine, because the metal itself has a cold feeling, which is very suitable for summer use.Lying in hot weather will feel cool and comfortable.Generally, the size of this beach chair is 180*77*76cm (length*width*height), but it is relatively large and cannot be folded. It is more suitable for use in the courtyard.

3. solid wood beach chair

solid wood is a very environmentally friendly material, and it is also the favorite of many people. It is usually 200*60*32cm (long*width*height). It is suitable for use in multiple places. Family courtyards, resorts, Outdoor, and companies can be used.

4. folding beach chair

The biggest feature of folding beach chairs is that it can be folded and easy to carry, and it is easy to store. After the folding, the weight is only about 6 kg. The size is 130*61*13cm (long*width*height), and some are smaller after folding.After opening, the size is 108*61*86cm (length*width*height), which can withstand 125kg weight.

5. Guifei vine chair beach chair

Because this kind of beach chair is better than ordinary beach chairs in appearance and comfort, it is relatively large in size and looks bulky.The external size reaches 180*60*90cm (length*width*height).This type of beach chair pursues a mood.

How can I buy the right beach chair size

1. The height of the lounge chair, the height of the lounge chair depends on the height of the chair. Except for the bar chairs, the height of the general chair is designed according to ergonomics, but the height of children's furniture is designed according to the proportion of children's height.

2. The deep exhibition of beach chairs is on the formal occasion, because the sitting posture of polite people is very correct, and can only be one -third of the chair.However, at the time of spare leisure, people like to lie on the chair throughout the body to feel the comfort of the chair in all directions.

3. The back of the lounge chair is height. For those who are sitting upright, you can choose a chair without a handrail or a lower chair with a lower handrail.Put the back completely on the back of the chair to be more comfortable, so we may have to consider the height of the back of the chair in this regard.

4. For lounge chairs with armrests, you must consider the height of the handrail when designing.The height of the handrail is proportional to the height of the back, not too high or too low.It is advisable to move around 20 to 25 cm.

5. Whether the lines of the beach chair are comfortable when they contact the human body and whether the softness of the mat is suitable. If the chair with a cushion or back is not attached to see if the structure of the lounge chair is healthy, whether the lines are Smooth, and try whether to lie down.

6. The stability of the lounge chair must not only talk about the lounge chair, but all chairs must consider the stability. We can see the stability of the entire chair from the details of the chairs, such as riveting.Go up and shake, and feel whether the chair itself shakes and whether the structure is stable and reasonable.

Profile

Ping An Tree, formerly known as Lanyu Cinnamon; Alias: Hongtouyu Cinnamon, Hongtou Mountain Cinnamon, Fanglan Mountain Cinnamon, Big Leaf Cinnamon, Taiwan Cinnamon, etc. It is camphor and camphor -belonging to evergreen small trees.Come from Lanyu Island, Taiwan.

Nickname

Lanyu meat cinnamon, Hongtouyu cinnamon, red -headed mountainite cinnamon, large leaf cinnamon, Taiwan cinnamon cinnamon

Morphology

Evergreen tree, about 15 meters high, leaves, branches, and bark do not have aroma when they are dry.The branches and small branches are brown, the leaves are huge, the surface is bright and green, with a metal luster.From June to July, the fruiting period was August-September.

Overall form

Circular shape, hairless.Leaves are raw or near-opposite, ovate to long-circular ovate, 8-11 (14) cm long, 4-5.5 (9) cm wide, apex sharp sharp, round, leather, fresh on it, when it is fresh above, when it is fresh, it is fresh.Green, gray -green when dry, light, near the same color below, dull, hairless on both sides, three veins from the base veins from about 1 cm of the leaf base, and near 3/4 of the near -leaf tablets gradually disappear or not obviously net knotting.Sometimes there is an additional side pulse on each side of the near -leaf edge. The fine veins are obvious on both sides and are shallow honeycomb mesh. The petiole is about 1.5 cm long, the abdomen is convex, reddish -brown or brown.flowers are not seen.fruit egg spherical, about 14 mm long, 10 mm wide; fruit cup -shaped, with short rounded tooth on the edges, hairless, fruit stalks about 1 cm long, hairless.fruit period from August to September.

Leaf formLanyu cinnamon is an evergreen small tree, with dignified tree -shaped, yellow -brown bark, with a plant height of 10 to 15 meters, yellow -green branches, Smooth and furry.The leaves are opposite or near -opposite, ovate or ovate -long oval, with apex tip and thick leather.The leaves are huge, 10 cm to 22 cm long, 5 cm wide to 8 cm wide, bright green on the surface, metallic luster, gray back on the back, obvious from the base three veins, the upper veins are about 1 cm from the leaf base of about 1 cm, the side veins are about 1 cm from about 1 cm.Stretching out, sometimes there is a small pulse on each side of the near -leaf edge. On both sides of the net veins, it is shallow honeycomb.The new leaves are tender green, the petiole is about 1.5 cm long, reddish brown to brown.

fruit formThe egg spherical shape is about 1.4 cm long and 1 cm diameter.The fruit cup -shaped, with short rounded tooth on the edges and hairless.No flowers.The fruit stalk is about 1 cm long and hairless.It is both a beautiful potted leaves and a very beautiful garden tree.

variety

1. Tianzhu Gui

Tianzhu Gui is an evergreen tree, with a height of more than 10 meters, cylindrical branches, pale yellow -green, hairless, leaf leather quality, each other or near -life, ovate and round, 7 cm long to 10 cm, 3 cm wide from 3 cm to 3 cm to from 3 cm to from 3 cm to 3 cm to from 3 cm to 3 cm to from 3 cm to from 3 cm.3.5 cm, dark green on the surface, gray green on the back, and the pulse of the base three veins. The base veins are extended from 1 cm to 1.5 cm at the base.Flower period in May, September in the fruit maturity period.Produced in Taiwan, Fujian, Zhejiang, Jiangxi, Anhui, Hubei and other places, Japan and North Korea are also distributed.This species is relatively cold-resistant and can resist -10 C low temperature, which can be used as garden greening.

2,Cinnamon

Cinnamon, alias Yu Gui and Cinnamon.Qiao wood, bark gray -brown, young branches are slightly quadrait, densely fluffed by yellow -brown fluff, leaf alternate or near -opposite, thick and leaning, oblong to lavage, long 8 cm to 16 cm, 4 cm wide 4 cm wide, 4 cm wide 4 cm wideBy 5.5 cm, the surface is bright and green, the back is sparse and short -grim, the inner roll of the leaf edge, the veins are from the base veins from 0.5 cm to 1 cm, and there are majority veins on the side of the leaf edge.The horizontal vein is close to parallel, and the petiole is 1.2 cm to 2 cm long, and the yellow short hair.From May to June, the fruiting period is from October to December.Produced in Guangdong, Guangxi, Fujian, Yunnan, Hainan, Taiwan, Hunan and other places.Extreme low temperature for about -4 .

3. Xianggui

Cinnamon is also known as fine -leaf cinnamon and cinnamon.Evergreen big incense wood, high can reach 12 meters to 20 meters, bark is gray, Smooth, slender branches, densely yellow flat -fluttering, leaf leather, young branches, old branches, elliptical, oval shapes, oval shapes, oval shapes, oval,To the lanceolate, 4 cm to 13 cm long, 1.5 cm wide to 6 cm wide, dark green above, yellow -green below, three pulses or from the base three veins, upper and upper convex.From June to July, the fruiting period is from August to October.Produced in Yunnan, Guizhou, Sichuan, Hubei, Guangxi, Guangdong, Zhejiang, Jiangxi, Anhui, Fujian, Taiwan and other places.

4,Ceylin cinnamon

Ceylon cinnamon is Sri Lanka cinnamon.Evergreen Joemu can be up to 10 meters high. The young branches are slightly four -prismatic and white spots. The leaves are opposite, 11 cm to 16 cm long, 4.5 cm wide to 5.5 cm wide, ovate to ovate -oriented, green surface green, green on the surface greenWith the back of the back, there is no hair on both sides. The three veins are extended from the base to the apex.The flower is yellow, about 6 mm long, ovate, 1 cm long to 1.5 cm, black.Native to Sri Lanka, Guangdong and Taiwan have species cultivation, which are famous spice plants and high -grade garden view trees.

Suitable place

1. Put on the East and the West

If the Ping An tree is placed on the east, it can increase the wealth and luck of the family, because in the Book of Changes, the East belongs to the wood, which represents the well -known business. It is a wish for the future of the family's future.If the Ping An tree is placed on the west, you can decorate it with a red ribbon, which means that the family and the wealth of wealth, the great luck, and the good wishes of the family and the kind longing for the future.

2,In the living room

The living room is a place where family members are leisure and entertainment, but also a place for guests. If Ping An tree is placed in the area, it can not only play a green role, and it has the effect of absorbing formaldehyde, which is good for people's health.It can achieve the purpose of eliminating the indoor odor by breathing and photosynthesis. Living in a clean room, the mood will naturally improve, and the quality of life will be inadvertently improved.

3. Put in the kitchen

Everyone cooks and cooks in the cooking room every day, and the air will become very bad when the time is long.If the Ping An tree is placed in this area, it can well purify the oil fume in the kitchen, filter out the PM2.5 in the house, increase the air humidity, and sink the smoke and dust, and will not be absorbed by the human body.

4Placed on the balcony

The balcony is the most abundant place in the home. If you put the Ping An tree in this area, not only the Ping An Tree will be more lush, but the air on the balcony will become more fresh, pure, and healthy, and the beautification environment can be ablePurify your body and mind, you can use the balcony as a study!

Effectiveness and role

Purification

Ping An tree can purify the air, correct the odor, and can absorb the dust in the air in large quantities, make the air full of fresh aroma, and when we return home all day, we feel a relaxed atmosphere.

Medicinal effect

Ping An Tree itself is a good Chinese medicine medicine, especially its roots and bark. The Skin medicine has the effect of removing rheumatism and dispersing cold.It had an extremely important impact on our lives.

View

Ping An Tree has become a representative flower plant for indoor ornamental in recent years. It has good ornamental value.

You can place it on the balcony in daily life, beside the sofa, or around the table, and in the corner, it can alleviate the nerves in people's tensions, eliminate fatigue, reduce stress, and make people feel relaxed and active. They are often used as garden cultivation.watch.

Plate

Customized boards are mainly, plywood, fine woodwork, integrated materials, and building templates. "Custom" is the characteristics of Ping An Tree.

Breeding method

illumination

Lanyu cinnamon needs better light, but it is more yin tolerant.Its demandality changes with the age of different ages. Young trees are durable. For 3 to 5 years, plant plants have grown quickly under the conditions of shade.More sufficient light.After the potted plants enter the summer, they can be transferred to the shade of the tree or under the shade of 40%to 50%, and the growth is ideal.If the light is too strong, it is easy to cause the leaves to yellow and lose their minds, and reduce the ornamental value it deserves, especially the potted plants that have been displayed indoors. When moving outdoors in summer for recovery, we must be careful.It is advisable to be maintained in an environment with 40%to 50%of the light, and it must be urgent, otherwise it will easily cause leaves to burn.In addition, when you encounter the big sun weather after the long rain in the late spring and summer, you should also do a good job of Shading in time. Otherwise, the leaves will also be burned, and it is difficult to restore its Emerald green spirit in a short time.

Humidity/watering

Lanyu Cinnamon requires a wet environment for pot soil.For this reason, potted plants should be maintainedPot soil is moist, but there is no accumulation of water. The relative humidity of the environment is better to maintain more than 80%.In the summer high temperature season or the dry time period of air, including the interior in winter, water should be sprayed with water and surrounding environments to create a relatively moist local space environment for them to promote strong growth.Watering should be controlled after autumn, and water should be sprayed more in winter and less watering.If there is water in the pot soil, it is easy to cause the plant to yellow, and the lower leaves fall off after yellowing.

temperature

Its growth temperature is 20 C to 30 C.The small tree is not resistant to low temperature. If it encounters frost for more than 5 days, plants that are maintained or cultivated in the open field easily cause bark frozen cracks, branches and leaves wither, and even the entire plant is frozen to death.Whether it is a small amount of plants with potted plants or large -scale production and operating cultivation, the shed temperature of not less than 5 C should be maintained in winter, so that the leaves can always maintain a green beauty.The larger plant can endure the low temperature of about 0 C for a short time in the case without cold winds in the shed.Potted plants in the Yangtze River Basin should be moved into the shed before the frost comes. The following year, the house is out of the house. Pay attention to prevent the cold damage caused by the night cream or the cold of spring cold.In the summer season, when the temperature exceeds 32 C, it is necessary to give a shed Shading and spraying of water to spray the leaf surface, so as to increase the dampness and cool down, so that it can maintain a strong growth potential.

soil

Potted plants or puppet cinnamon cinnamon should adopt loose, breathable, Smooth drainage, and organic acidic culture soil or rotten soil rich in organic matter.Potting soil plates or pH values above 7.5 or more, will also cause plant leaves to yellow, severe growth, and decreased bud power, and affect the germination update, and even shorten its cultivation life.For this reason, Xiaoliu should be changed once a year, and the large plant can be changed once every 2 years. The growth season is loose once a month. Especially after the heavy rain, check the Flower pots in time.Replace loose pot soil.Potted plants, it is best to arrange for the time to change the pots every year, it is better to arrange it after the house is out of the house until the bud.

Fertilize

Lanyu cinnamon plants are full, the leaves are huge, and the growth is strong, so the amount of Fertilizer requires a large amount.In addition to the need to cultivate fertile Fertilizer, the potted orchid cinnamon is required to cultivate the fertile Fertilizer. From the Zhongchun to the early autumn, it can be used for the thin cake Fertilizer water or alum water once a month.After the autumn, two times of phosphorus and Potassium fertilizer should be applied, such as 0.3%of the 0.3%potassium dihydrogen phosphate solution, to increase the cold resistance of the plants, promote the early wood of the tender shoots, and make it safe to winter.In winter, all forms of topdressing should be stopped to prevent Fertilizer from hurting the roots, causing the leaves to yellow or the scorching off, otherwise it is difficult to restore its original appearance.

Four Seasons Management

1. spring management

Potted Ping An Tree should be out of the room around the Qingming Festival in spring, but after leaving the room, you still need to pay attention to prevent the cold damage that may be caused by the night cream or the cold of spring cold.In the late spring and early summer, it is best to cover about 30 % of the light, keep the pot soil moist without water, and the relative humidity of the air should be more than 80 %.

Potted plants are required to cultivate Fertilizer Fertilizer and sufficient base Fertilizer. From Zhongchun to early autumn, it can be applied to thin liquid Fertilizers or compound Fertilizers once a month.It is easy to cause anthracnose and brown spot in spring. It can be prevented with 1 % equivalent Bordeaux liquid. A small amount of diseased leaves can be removed and burned in time.

2. summer management

In the summer, high temperature and strong light, potted plants need to shade 40 % to 60 % of the crickets. If the light is too strong, it is easy to cause yellow leaves and reduce its ornamental value.Especially in the indoor display of potted plants, when moving outdoors for recovery in summer, you must be careful to gradually increase light, and you must not overwhelm it, otherwise the leaves will easily cause leaves.When the temperature exceeds 32 C, it is also necessary to spray water and humidify and cool down from the leaf surface and its surroundings, so that it can maintain a strong growth potential.Apply a thin liquid or Compound fertilizer once a month.In the summer, the leafyferomy is often shot and can be sprayed with chrysanthemum ester.

3. autumn management

After the autumn, the temperature gradually decreases. Potted peace trees should control watering, gradually reduce the amount of watering, and often spray water and humidify from the leaves and its surroundings.Yellow falls off, and even rotten roots.Before cooling down in autumn, 0.2 % 0.3 % potassium dihydrogen phosphate solution should be applied twice in a row to increase the cold resistance of the plant, promote the early wood of the tender shoots, and ensure the safety of the winter.

Ping An tree is mostly used for seedling seedlings. It is a suitable period in autumn from September to October. It can be sowed by mature purple and black fruits. After washing the peel flesh, it floats to the empty seeds and spread it in a cool place to dry.The seeds can be sowed with it. Soak the seeds for 30 minutes with warm water of about 40 C before sowing. It can also be sowed with a wet sand layer with a wet sand layer. After 20-30 days, it can be germinated.When the seedlings grow 3 to 4 real leaves, the liquid Fertilizer is applied once a month, and the fertilization is stopped after autumn, and the temperature is not lower than 5 C to ensure safe wintering.

4. winter management

Ping An tree small tree is not resistant to low temperature, and it is necessary to enter the room in time.The winter temperature should not be less than 5 C.For more than 5 days of frosting plants in open field maintenance or cultivation, it is easy to cause bark frozen cracks, branches and leaves wither, and even frozen to death.Large plants can endure low temperatures of about 0 C for a short period of time.Watering should be controlled in winter, keeping the soil dry, and stopping all forms of topdressing to prevent Fertilizer from hurting the roots, resulting in yellowing or burning of the leaves falling off, it is difficult to restore the original appearance of its plant.

Frequently problem handling

Breeding method

Sowing

The breeding of Lanyu Cinnamon has multi -sowing method.South China can use mature purple -black fruits for sowing from September to October. After washing off the peel flesh, floating and empty seeds, spreading it in a cool place to dry.Jia or Gao Di has not been prepared yetIt cannot be sowed immediately. The seeds need to be stored in wet sand, put them in a cool place, and pay attention to prevent the seeds from getting mold. After the granular split mouth is exposed, it will be sowed or sowed on the ground.

The seeds that have been germinated without sand and germination can be soaked with a 0.3%Forma solution for 30 minutes before sowing, poured out excess herpicidal solution, sealed for 2 hours, and then rinsed with water.planting with water for 24 hours can increase its germination rate.If the seeds are not disinfected, the seeds can be soaked directly with warm water of about 40 C, and the germination rate can be increased.Usually, the ditch is mainly based on the ditch, the line spacing is 20 cm to 25 cm, the plant spacing is 5 cm to 7 cm, and the thickness of the soil is 1.5 cm to 2 cm.Keep the seedbed moist, and the granulation is unearthed 1/3 to 3 times to 3 times to remove the grass, and then the shack is covered with yin.When the seedlings grow 3 to 4 true leaves, the liquid Fertilizer can be applied once a month, and it is stopped after autumn to do a good job of cold prevention.Due to the fewer plants, the transplantation should be carried out early, or the sand bed urges buds, and the sprouts are planted to plant Bags. The southern region is implemented in the southern region.

Cuttance

Ping An Tree cuttings time from April to May in the first half of the year, September to October in the second half of the year, the best time at 22 C to 28 C.When cutting, a nutrient bowl or Flower pot is used. The matrix uses pure vermiculite or vermiculite: the proportion of grass carbon = 1: 1.disinfection should be performed before the cuttings, and 0.1%potassium permanganate or 600 to 800 times liquid of rivals can be exposed or exposed.

The cuttings should choose the top advantage. At that time, the semi -wood quality, robust and fulfilling, infected with germs, and bright green leaves.It's best to bring dew in the morning or yinSky cut.

The cuttings are cut into 10 cm to 15 cm long, leaving 2 to 3 leaves to reduce the loss of water.Leave 3 cm to 5 cm of cuttings to cut into oblique mouth.Immersed the cuttings at the base of 3 cm to 5 cm at the root solution (2.5 grams of 2 kg of water, 2 to 3 hours slowly, 0.2 kg of water quickly, soaked for 15 to 30 seconds)Each bag is 5 grams of water 0.5 kg, and the base is 16 to 20 hours). After soaking, remove the inserted substrate of 3 cm to 5 cm.It is too shallow to fall, too deep and mildew, and then compact with your fingers.Each small pot should be cut with a seedlings, and the cuttings are poured through the water until there is water flowing at the bottom of the pot.Use a plastic bag to hold the entire plug, keep 100%humidity, and place it in a cool place to avoid direct sunlight.

Pour water through the water about 4 days after cuttings. In the north, a few drops of hydrochloride or drops of edible vinegar are dripped in the north.When the matrix humidity is large, it does not water, but the matrix should be wet, and the relative humidity of the environment should be about 80%.Little watering, drought and death of cutting seedlings, and excessive watering can cause mildew wound tissue.For about 15 days, the plastic bag is tied, and the plastic bag is removed in about 20 days.After removing the plastic, the weak sunlight time can be increased in the morning and evening. After 25 days, starting take root, and it can grow new roots of 1 cm to 2 cm in about a month.2 months can grow 5 cm to 6 cm long roots.The old leaves do not fall off, and the new roots are generated, indicating that cuttings seedlings are living.

During this time, the proportion of the substrate should be a ratio of rotten soil and fine yarn or a sandy loam.When pouring the basin, the cuttings seedlings are pulled up, planted into the large basin, and then filled with the well -equipped matrix and poured water.After a week, a 1 concentration of compound Fertilizers can be applied.After the plant is drawn, the thin cake Fertilizer can be cast once a month. After the autumn, it can be applied to 0.3%of the potassium dihydrogen phosphate solution twice in a row to increase the cold resistance of the plant and promote the early wood of the tender shoots.It can make it safe.Fertilization, Fertilizer, thick Fertilizer, large Fertilizer, especially the disabled high concentration of Fertilizer liquid, otherwise it will easily cause Fertilizer burning roots, causing the leaves to become yellow and dry, and plant death.

In addition, flower enthusiasts can also try to raise seedlings.

Prevention and treatment of pests and insect pests

anthrax

Mainly harm the seedling period and adult leaves.Leaves infection occur on the leaf surface, leaf tip, and leaf edge. It is brown and irregular. In the later period, it is often expanded or merged into large gray -brown spots, the edges are tan, wavy, and there are many small black spots on the lesions., That is its conidia.Conidia spreads through wind and rain. When the humidity is large, the spores germinate into the leaves or seedlings for harm. When continuous rain, lack of sunlight, soil sticky soil, or dampness in the shed room, it is most popular.

Prevention and treatment methods: Discover a small amount of diseased leaves, remove and destroy it in time; add phosphorus and Potassium fertilizer to increase the resistance of plant in the growth season; in the early stage of the onset, use 25%charcoal powder wettable powder 500 times liquid, or 60%charcoal spiritual wettable700 times liquid of the powder, or 75%of the nomatoprobine wettable powder 600 times liquid, spray alternately, every 10 days to 15 days, 3 to 4 consecutive times.

Brown spot

From April to May, an oval yellow -brown lesions occurred on the plants from April to May.

There are many small black dot particles, and the back of the lesions is purple, so that the whole leaf is yellow and withered, making the plant a large number of leaves.Prevention method: 1%Bordeaux liquid can be used for prevention; a small amount of diseased leaves occur, and timely removal of burning; 500 times liquid with 50%multi -bacterial wettable powder at the beginning of the onsetThe liquid, or 50%of the sterilization king water agent is 1,000 times liquid, sprayed every 10 days, 3 to 4 times in a row.

Brown root disease

The leaves of the diseased tree gradually became yellow and drooping. When severe, brown and dry, dry stems lost water and shrinking, and the root system became brown and rot, and the diseased plant died in the short term.The root of the disease, the diseased soil, and the leftover strands are the source of the first invasion of the disease. It is transmitted by wind and rain or contact, which is generally a single plant.

Prevention and treatment methods: severe diseases and plants that die due to illness should be removed and burned, and 600 times the liquid solution of 50%polymorrhoids wettable powder; in the early stage of the onset, spray 50%of methacoplasis?Double liquid, or 50%root rot wettable powder 800 times solution for prevention and treatment.

Insect pest

roller

Most of them occur in summer and autumn, and it shrinks several new leaves into nests. The larvae lurks in it. It can be sprayed with 90%of the enemy's backbone crystal 800 times liquid, or 40%of 1000 times liquid liquid of lactated oil.kill.

aphid

The tender leaves and new buds of Lanyu cinnamon are prone to aphida inhalation hazards, causing the leaves to be covered with greasy and seduced coal pollution, which affects the growth and display of plants.Prevention and control method: After sprinkle the plant ash on the plant, rinse it with water; spray bitter tree leaves juice to effectively kill insects; spray it with a 10%mimoline wettable powder 2000 times liquid.

Leaves yellow and fall off

The main reasons why the leaves appear yellow or falling off in Ping An tree are the followingSeveral aspects:

1. Due to accidents or special circumstances, the root system of the plant is severely damaged, resulting in yellow leaves.

2. It is the indoor temperature below 5 C, and the yellow leaves are caused by frost damage.

3,It is too much watering, causing the rotten roots at the bottom to cause the plants to yellow leaves.

4,The water quality is heavy and alkaline, which leads to the slow yellowing of the leaves. This situation is more common in the north, especially Xinjiang and other places.

5.Improper fertilization, too much fertilization and too much fertilization, causing nutritional root to lose water and atrophy.

6.It was exposed to the sun for a long time, which caused the leaves to dry and yellow.

The method of solving the yellow leaves of Ping An's leaves is: When the leaves are yellow, the root system of the Ping An tree should be checked., Cut off, reintegrate it once.

Note: When re -cultivating, you can add some moist fine sand to the shear position of its root. The purpose of this is to be able to germinate a new root. At this timeAfter the new leaf is released, do fertilization work and increase light, so that it can quickly promote the growth of the safe tree.

precautions

1. The small plant of the Ping An tree should be changed once a year. The large plant can be changed once in 2 years. After the spring is out of the room, it is a suitable period for the basin.Every time you change the pot, you need to abandon about 1/3 of the soil to replace the loose and fertile new soil and base Fertilizer.Usually you need to loosen the soil once a month, especially after the heavy rain, you should check the Flower pots in time, find that the water in the pot should fall as soon as possible, and replace the loose pot soil.

2. The Ping An Tree must be trimmed when it is too dense. When the trimming time is fine every April, it is recommended to cut off the diseased branches and thin branches and cut the long branches short.It can promote its branches.

3. Ping An Tree is prone to brown root disease in autumn. At the beginning of the onset, it can be sprayed with 50 % methacoplasis eloquent eloquent eulsion 800 times or 50 % root rot wettable powder 800 times solution for prevention and treatment.The severe diseases and plants that die due to illness should be removed and burned, and disinfected with 600 times liquid solution.

Is it necessary to install a car sunshade?

In the past, the windshield of the windshield was an example. If the car was parked outdoors in the summer, under the sun exposure, the temperature inside the car window tightly increased sharply to 50 or 60 degrees Celsius or even higher.The leather seats are damaged.Because the windows of many cars are posted with a Solar membrane, windshields have become the main way to enter the sun.It is convenient for folding windshield to reflect the vast majority of sunshine. Such Shading plates are usually made of Tin foil, and it is particularly effective to open it when parking in a short time.curtains or windows should also be pasted or installed in time or installation. The installation of car curtains is only installed on the upper and bottom of the window of the window, and then the curtains are installed in the meantime, but sometimes the slippery shaping will not be Smooth. At this time, it will be pulled up.More troublesome.In addition to curtains, you can buy a few windows orStickerStaying on the window can also block the hot sun.But the effect of not being installed on the sun.

Is it necessary to install the sun -shaped curtain?The advantage of the car sunken curtain is to block the sun, so that the light of the function area cannot enter the car. It has the effect of reducing the burning in the car to a certain extent.The function of watching the car outside the car is unclear, which can increase safety factors. If you need to protect the car better, it is recommended to apply an explosion -proof insulation film to provide better protection for the car.

Is the car sunshade be useful?

1, Reduce the temperature in the car

Sunscreening is a combination of multi -layer air bubble film and aluminum foil. It belongs to a type of plastic product. The bubble film has good strength, toughness, and anti -impact resistance.Aluminum foil has reflected light, which reduces heat radiation and has low thermal radiation conduction capabilities.The sun is shot on the obstruction, and some of the heat will be blocked, and the ultraviolet rays will be reflected by aluminum foil.

2, Protect the instrument equipment in the car

The direct sunlight of the sun will make the temperature in the car high70About, not only the center console shell is prone to deformation, but also the instrument and audio equipment on the dashboard are also damaged due to high temperature, such as aging component, needle and welding.Shading can effectively avoid direct sunlight.

32. Reduce pollution in the car

Automobile central console and interior items are generally processed by plastic. Long temperature for a long time will exude them to harmful substances and affect human health.The use of Shading can reduce the temperature in the car.

What kind of car sunshade is better?How to choose

1. It is best to choose an aluminum foil cover with suction cups

Aluminum foil Shading is generally divided into ordinary "light board" type and pattern type. It is suitable for most small cars and can be placed in windshield and rear window glass.The aluminum foil and thermal insulation with suction cups are easy to use. After expanding, use a suction cup to suck it in the front windshield or in the rear window glass.If it is a pattern -type aluminum foil shielding, in the less hot season, the color pattern can be placed out. If the weather is very hot, the aluminum foil can be used to ensure the reflection of the sun.

2. Hanging the most convenient gauze sideways

When driving, the sunlight came in the side window to the driver and passenger's Skin. In addition to giving the car film, it is the best way to use a shade gear for physical isolation.The gauze Shading is generally two suction cups. The advantage is that it is more convenient to remove it, but the problem is that when the window is shaken, it may touch the suction cup.

3. Repeatable static sticker side Shading

From the perspective of sunshade, the static sticker side Shading is better than the yarn net, but it is more troublesome to install.Because the design does not make people feel stuffy and closed, it will not affect the vehicle window lifting after sticking to the glass.But pay attention when paste, it is best to put the lower side into the window seam for about 5cm, so as to avoid the static stickers when shaking the glass.After summer, pull the static sticker down and rinse it in the second year.

4. The best effect of the effect

The sunny curtain is like curtains. In addition to the curtains, the components also have slippery, sliders, etc., which are more complicated to install, but because the material is relatively soft, the sunny curtain can block the window more strict.After each use, you only need to pull the curtain from the storage Tube to fix it with suction cups. After loosening the suedr after the suction cup, it will automatically recover.Fall off.